mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-12-28 17:48:35 +01:00
105 lines
3.2 KiB
ReStructuredText
105 lines
3.2 KiB
ReStructuredText
|
Teleinformation from Linky electrical counter.
|
||
|
|
==============================================
|
||
|
|
|
||
|
|
.. seo::
|
||
|
|
:description: Instructions for setting up French Teleinformation
|
||
|
|
:image: teleinfo.jpg
|
||
|
|
:keywords: teleinfo
|
||
|
|
|
||
|
|
The ``teleinfo`` component allows you to retrieve data from a
|
||
|
|
French electrical counter using Teleinformation (`datasheet <https://www.enedis.fr/sites/default/files/Enedis-NOI-CPT_54E.pdf>`__). It works with Linky electrical
|
||
|
|
counter but also legacy EDF electrical counter.
|
||
|
|
|
||
|
|
.. figure:: images/teleinfo-full.jpg
|
||
|
|
:align: center
|
||
|
|
:width: 50.0%
|
||
|
|
|
||
|
|
Linky electrical counter
|
||
|
|
|
||
|
|
..
|
||
|
|
|
||
|
|
A simple electronic assembly with an optocoupler and a resistor could
|
||
|
|
let you retrieve detailed power consumption or power production.
|
||
|
|
There is plenty of example on the web.
|
||
|
|
|
||
|
|
As the communication with the Teleinformation is done using UART, you need to
|
||
|
|
have an :ref:`UART bus <uart>` in your configuration with the ``rx_pin``
|
||
|
|
connected to the output of the optocoupler component. Additionally, you need to
|
||
|
|
set the baud rate to 9600bps if counter is configured to work in standard
|
||
|
|
mode or 1200bps in historical mode. To find out which mode you are using,
|
||
|
|
simply press -/+ buttons on the counter and look for `Standard mode` or
|
||
|
|
`Historical mode` as below.
|
||
|
|
|
||
|
|
.. figure:: images/teleinfo-standard.jpg
|
||
|
|
:align: center
|
||
|
|
:width: 50.0%
|
||
|
|
|
||
|
|
Linky electrical counter configured in standard mode.
|
||
|
|
|
||
|
|
..
|
||
|
|
|
||
|
|
.. figure:: images/teleinfo-historical.jpg
|
||
|
|
:align: center
|
||
|
|
:width: 50.0%
|
||
|
|
|
||
|
|
Linky electrical counter configured in historical mode.
|
||
|
|
|
||
|
|
..
|
||
|
|
|
||
|
|
.. code-block:: yaml
|
||
|
|
|
||
|
|
# Example configuration entry
|
||
|
|
uart:
|
||
|
|
id: uart_bus
|
||
|
|
rx_pin: GPIO3
|
||
|
|
tx_pin: GPIO1
|
||
|
|
baud_rate: 1200
|
||
|
|
parity: EVEN
|
||
|
|
data_bits: 7
|
||
|
|
|
||
|
|
sensor:
|
||
|
|
- platform: teleinfo
|
||
|
|
tags:
|
||
|
|
- name: "HCHC"
|
||
|
|
sensor:
|
||
|
|
name: "hchc"
|
||
|
|
unit_of_measurement: "Wh"
|
||
|
|
icon: mdi:flash
|
||
|
|
- name: "HCHP"
|
||
|
|
sensor:
|
||
|
|
name: "hchp"
|
||
|
|
unit_of_measurement: "Wh"
|
||
|
|
icon: mdi:flash
|
||
|
|
- name: "PAPP"
|
||
|
|
sensor:
|
||
|
|
name: "papp"
|
||
|
|
unit_of_measurement: "VA"
|
||
|
|
icon: mdi:flash
|
||
|
|
update_interval: 60s
|
||
|
|
historical_mode: true
|
||
|
|
|
||
|
|
Configuration variables:
|
||
|
|
------------------------
|
||
|
|
|
||
|
|
|
||
|
|
- **tags** (**Required**): Specify the tag you want to retrieve from the Teleinformation and select with what name to transmit it.
|
||
|
|
|
||
|
|
- **name** (**Required**, string): The name of the tag corresponding to what the electrical counter send.
|
||
|
|
- **sensor** (**Required**, :ref:`Sensor <config-sensor>`): Associate a sensor with the tag. See options from :ref:`Sensor <config-sensor>`.
|
||
|
|
|
||
|
|
- **historical_mode** (*Optional*): Wether to use historical mode or standard mode.
|
||
|
|
With historical mode, baudrate of 1200 must be used whereas 9600 must be used in
|
||
|
|
standard mode. Defaults to ``False``.
|
||
|
|
|
||
|
|
- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the
|
||
|
|
sensor. Defaults to ``60s``.
|
||
|
|
|
||
|
|
- **uart_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the :ref:`UART Component <uart>` if you want
|
||
|
|
to use multiple UART buses.
|
||
|
|
|
||
|
|
See Also
|
||
|
|
--------
|
||
|
|
|
||
|
|
- :apiref:`teleinfo/teleinfo.h`
|
||
|
|
- :ghedit:`Edit`
|