commit
08ccac0388
|
@ -6,7 +6,8 @@ MAX31856 Thermocouple Temperature Sensor
|
|||
:image: max31856.jpg
|
||||
|
||||
The ``MAX31856`` temperature sensor allows you to use your MAX31856 Thermocouple
|
||||
temperature sensor (`datasheet <https://datasheets.maximintegrated.com/en/ds/MAX31856.pdf>`__) with ESPHome
|
||||
temperature sensor (`datasheet <https://datasheets.maximintegrated.com/en/ds/MAX31856.pdf>`__) with ESPHome.
|
||||
Although the chip supports multiple thermocouple types, this component only implements the ``K`` type.
|
||||
|
||||
.. figure:: images/max31856-full.jpg
|
||||
:align: center
|
||||
|
@ -20,14 +21,14 @@ As the communication with the MAX31856 is done using SPI, you need
|
|||
to have an :ref:`spi bus <spi>` in your configuration with both **miso_pin** and **mosi_pin** set.
|
||||
|
||||
- ``VIN`` connects to 5V (``3V3`` will output 3.3V), or directly connect ``3V3`` to 3.3V
|
||||
- ``3Vo`` is not used by ESPHome
|
||||
- ``3Vo`` not used by ESPHome
|
||||
- ``GND`` connects to ground
|
||||
- ``CLK`` connects to the SPI **clk_pin**
|
||||
- ``SDO`` connects to the SPI **miso_pin**
|
||||
- ``SDI`` connects to the SPI **mosi_pin**
|
||||
- ``CS`` connects to a free GPIO pin
|
||||
- ``FLT`` is not used by ESPHome
|
||||
- ``DRDY`` is not used by ESPHome
|
||||
- ``FLT`` not used by ESPHome
|
||||
- ``DRDY`` not used by ESPHome
|
||||
|
||||
.. code:: yaml
|
||||
|
||||
|
|
Loading…
Reference in New Issue