[bl0942] Tidy up example (#4242)

This commit is contained in:
Jesse Hills 2024-09-10 13:23:09 +12:00 committed by GitHub
parent ebdb1bc053
commit 0a0b2d8964
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194

View File

@ -16,31 +16,18 @@ to some pins on your board and the baud rate set to 4800 with 1 stop bit.
.. code-block:: yaml
# Example configuration entry
uart:
id: uart_bus
tx_pin: TX
rx_pin: RX
baud_rate: 4800
stop_bits: 1
sensor:
- platform: bl0942
uart_id: uart_bus
voltage:
name: 'BL0942 Voltage'
current:
name: 'BL0942 Current'
power:
name: 'BL0942 Power'
filters:
multiply: -1
energy:
name: 'BL0942 Energy'
frequency:
name: "BL0942 Frequency"
accuracy_decimals: 2
update_interval: 60s
Configuration variables:
------------------------
@ -49,7 +36,7 @@ Configuration variables:
All options from :ref:`Sensor <config-sensor>`.
- **current** (*Optional*): The current value of the sensor in Amperes. All options from
:ref:`Sensor <config-sensor>`.
- **power** (*Optional*): The (active) power value of the sensor in Watts. Note that some power meters will report this in negative values (probably wired backwards), so you may want to use a filter to multiply it by -1. All options from :ref:`Sensor <config-sensor>`.
- **power** (*Optional*): The (active) power value of the sensor in Watts. Note that some power meters will report this in negative values (probably wired backwards), so you may want to use a filter to multiply it by -1. All options from :ref:`Sensor <config-sensor>`.
- **energy** (*Optional*): Use the energy value of the sensor in kWh.
All options from :ref:`Sensor <config-sensor>`.
- **frequency** (*Optional*): The frequency value of the sensor in Hertz. All options from