Upstream/esphome-docs
1
0
Fork 0
mirror of https://github.com/esphome/esphome-docs.git synced 2024-09-27 04:13:07 +02:00
Code Issues Projects Releases Wiki Activity

[binary_sensor] Tidy up name/id (#4138)

Browse Source
This commit is contained in:
Jesse Hills 2024-08-14 14:53:49 +12:00 committed by GitHub
parent 4b09703009
commit 0af6040929
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
18 changed files with 6 additions and 53 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
components/binary_sensor/analog_threshold.rst
View File

@ -36,8 +36,6 @@ a binary sensor.
Configuration variables
-----------------------
- **name** (**Required**, string): The name of the binary sensor.
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
- **sensor_id** (**Required**, :ref:`config-id`): The ID of the source sensor.
- **threshold** (**Required**, float or mapping): Configures the reference for comparison. Accepts either a shorthand
float number that will be used as both upper/lower threshold, or a mapping to define different values for each (to

3
components/binary_sensor/ble_presence.rst
View File

@ -54,7 +54,6 @@ The ``ble_presence`` binary sensor platform lets you track the presence of a Blu
Configuration variables:
------------------------
- **name** (**Required**, string): The name of the binary sensor.
- **mac_address** (*Optional*, MAC Address): The MAC address to track for this
binary sensor. Note that exactly one of ``mac_address``, ``irk``, ``service_uuid`` or ``ibeacon_uuid``
must be present.
@ -72,8 +71,6 @@ Configuration variables:
same building.
- **ibeacon_minor** (*Optional*, int): The iBeacon minor identifier of the beacon that needs
to be tracked. Usually used to identify beacons within an iBeacon group.
- **id** (*Optional*, :ref:`config-id`): Manually specify
the ID used for code generation.
- **min_rssi** (*Optional*, int): at which minimum RSSI level would the component report the device be present.
- **timeout** (*Optional*, :ref:`config-time`): The delay after last detecting the device before publishing not present state.
The default is 5 minutes.

2
components/binary_sensor/cap1188.rst
View File

@ -68,9 +68,7 @@ binary sensors for each touch sensor.
Configuration variables:
- **name** (*Optional*, string): The name for the binary sensor.
- **cap1188_id** (*Optional*, :ref:`config-id`): The ID of the CAP1188 defined above. Useful for multiple CAP1188's on the I²C bus.
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
- **channel** (**Required**, int): The channel number the CAP1188 the touchkey is connected to.
- All other options from :ref:`Binary Sensor <config-binary_sensor>`.

2
components/binary_sensor/esp32_touch.rst
View File

@ -141,8 +141,6 @@ Configuration variables:
events on.
- **threshold** (**Required**, ``int``): The threshold to use to detect touch events. See
:ref:`esp32-finding-thresholds` below for help determining this value.
- **name** (**Required**, string): The name of the binary sensor.
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
- **wakeup_threshold** (*Optional*, ``int``): The threshold to use to detect touch events to wake-up from deep sleep.
See :ref:`esp32-finding-thresholds` below for help determining this value. Touch pad sensors that should trigger a
wake-up from deep sleep must specify this value. The :ref:`deep_sleep-component` must also be configured to enable

2
components/binary_sensor/gpio.rst
View File

@ -27,8 +27,6 @@ Configuration variables:
------------------------
- **pin** (**Required**, :ref:`Pin Schema <config-pin_schema>`): The pin to periodically check.
- **name** (**Required**, string): The name of the binary sensor.
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
- All other options from :ref:`Binary Sensor <config-binary_sensor>`.
Activating internal pullups

2
components/binary_sensor/homeassistant.rst
View File

@ -30,11 +30,9 @@ With Home Assistant 2021.6 or newer, entity state attributes can also be importe
Configuration variables:
------------------------
- **name** (**Required**, string): The name of the binary sensor.
- **entity_id** (**Required**, string): The entity ID to import from Home Assistant.
- **attribute** (*Optional*, string): The name of the state attribute to import from the
specified entity. The entity state is used when this option is omitted.
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
- All other options from :ref:`Binary Sensor <config-binary_sensor>`.
See Also

18
components/binary_sensor/hydreon_rgxx.rst
View File

@ -34,27 +34,15 @@ Configuration variables:
- **too_cold** (*Optional*): ``true`` if the sensor reports being too cold. Hydreon only mentions this feature for the RG-9.
- **name** (**Required**, string): The name for the sensor.
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
- All other options from :ref:`Binary Sensor <config-binary_sensor>`.
- All options from :ref:`Binary Sensor <config-binary_sensor>`.
- **lens_bad** (*Optional*): ``true`` if the sensor reports the lens being bad.
- **name** (**Required**, string): The name for the sensor.
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
- All other options from :ref:`Binary Sensor <config-binary_sensor>`.
- All options from :ref:`Binary Sensor <config-binary_sensor>`.
- **em_sat** (*Optional*): ``true`` if the sensor reports the Emitter being saturated.
- **name** (**Required**, string): The name for the sensor.
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
- All other options from :ref:`Binary Sensor <config-binary_sensor>`.
- All options from :ref:`Binary Sensor <config-binary_sensor>`.
See Also

3
components/binary_sensor/index.rst
View File

@ -27,7 +27,8 @@ you can always override it.
Configuration variables:
- **name** (**Required**, string): The name for the binary sensor.
- **id** (*Optional*, string): Manually specify the ID for code generation. At least one of **id** and **name** must be specified.
- **name** (*Optional*, string): The name for the binary sensor. At least one of **id** and **name** must be specified.
.. note::

2
components/binary_sensor/modbus_controller.rst
View File

@ -12,8 +12,6 @@ and requires :doc:`/components/modbus_controller` to be configured.
Configuration variables:
------------------------
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
- **name** (**Required**, string): The name of the sensor.
- **register_type** (**Required**): type of the modbus register.
- ``coil``: Coils are 1-bit registers (ON/OFF values) that are used to control discrete outputs. Read and Write access. Modbus *Function Code 1 (Read Coil Status)* will be used.

2
components/binary_sensor/mpr121.rst
View File

@ -69,9 +69,7 @@ binary sensors for each touch sensor.
Configuration variables:
- **name** (*Optional*, string): The name for the binary sensor.
- **mpr121_id** (*Optional*, :ref:`config-id`): The ID of the MPR121 defined above. Useful for multiple MPR121's on the I²C bus
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
- **channel** (**Required**, int): The channel number at the MPR121 the touchkey is connected to.
- **touch_threshold** (*Optional*, int): A per-channel override of the global touch_threshold value. If not specified, uses the global value.
- **release_threshold** (*Optional*, int): A per-channel override of the global release_threshold value. If not specified, uses the global value.

1
components/binary_sensor/nextion.rst
View File

@ -39,7 +39,6 @@ See :doc:`/components/display/nextion` for setting up the display
Configuration variables:
------------------------
- **name** (**Required**, string): The name of the sensor.
- **nextion_id** (*Optional*, :ref:`config-id`): The ID of the Nextion display.
- **component_name** (*Optional*, string): The name of the Nextion component.
- **variable_name** (*Optional*, string): The name of the Nextion variable. Any value over ``0`` is considered to be **on**

2
components/binary_sensor/pn532.rst
View File

@ -208,8 +208,6 @@ Configuration variables:
- **uid** (**Required**, string): The unique ID of the NFC/RFID tag. This is a hyphen-separated list
of hexadecimal values. For example ``74-10-37-94``.
- **name** (**Required**, string): The name of the binary sensor.
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
- All other options from :ref:`Binary Sensor <config-binary_sensor>`.
.. _pn532-setting_up_tags:

2
components/binary_sensor/rc522.rst
View File

@ -189,8 +189,6 @@ Configuration variables:
- **uid** (**Required**, string): The unique ID of the NFC/RFID tag. This is a hyphen-separated list
of hexadecimal values. For example ``74-10-37-94``.
- **name** (**Required**, string): The name of the binary sensor.
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
- All other options from :ref:`Binary Sensor <config-binary_sensor>`.
.. _rc522-setting_up_tags:

2
components/binary_sensor/rdm6300.rst
View File

@ -107,8 +107,6 @@ Configuration variables:
************************
- **uid** (**Required**, int): The unique ID of the NFC/RFID tag.
- **name** (**Required**, string): The name of the binary sensor.
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
- All other options from :ref:`Binary Sensor <config-binary_sensor>`.
.. _rdm6300-setting_up_tags:

4
components/binary_sensor/status.rst
View File

@ -22,9 +22,7 @@ for Home Assistant.
Configuration variables:
------------------------
- **name** (**Required**, string): The name of the binary sensor.
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
- All other options from :ref:`Binary Sensor <config-binary_sensor>`. (Inverted mode is not supported)
- All options from :ref:`Binary Sensor <config-binary_sensor>`. (Inverted mode is not supported)
See Also
--------

4
components/binary_sensor/template.rst
View File

@ -36,12 +36,8 @@ Possible return values of the lambda:
Configuration variables:
------------------------
- **name** (**Required**, string): The name of the binary sensor.
- **lambda** (*Optional*, :ref:`lambda <config-lambda>`):
Lambda to be evaluated repeatedly to get the current state of the binary sensor.
- **id** (*Optional*,
:ref:`config-id`): Manually specify
the ID used for code generation.
- All other options from :ref:`Binary Sensor <config-binary_sensor>`.
.. _binary_sensor-template-publish_action:

4
components/binary_sensor/ttp229.rst
View File

@ -47,9 +47,7 @@ The configuration is made up of two parts: The central component, and individual
Configuration variables:
- **name** (**Required**, string): The name of the binary sensor.
- **channel** (**Required**, int): The channel number at the TTP229 the touchkey is connected to.
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
- All other options from :ref:`Binary Sensor <config-binary_sensor>`.
``ttp229_bsf`` Component
@ -85,9 +83,7 @@ Base Configuration:
Configuration variables:
- **name** (**Required**, string): The name of the binary sensor.
- **channel** (**Required**, int): The channel number at the TTP229 the touchkey is connected to.
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
- All other options from :ref:`Binary Sensor <config-binary_sensor>`.
See Also

2
components/binary_sensor/tuya.rst
View File

@ -20,8 +20,6 @@ You can create the binary sensor as follows:
Configuration variables:
------------------------
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
- **name** (**Required**, string): The name of the binary sensor.
- **sensor_datapoint** (**Required**, int): The datapoint id number of the binary sensor.
- All other options from :ref:`Binary Sensor <config-binary_sensor>`.