Upstream/esphome-docs
1
0
Fork 0
mirror of https://github.com/esphome/esphome-docs.git synced 2024-12-24 17:08:15 +01:00
Code Issues Projects Releases Wiki Activity

Merge branch 'current' into next

Browse Source
This commit is contained in:
Jesse Hills 2021-11-10 21:10:25 +13:00
commit 189a1afce6
No known key found for this signature in database
GPG Key ID: BEAAE804EFD8E83A
33 changed files with 212 additions and 82 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
changelog/2021.10.0.rst
View File

@ -143,6 +143,19 @@ Release 2021.10.2 - October 22
- Fix ESP8266 OTA compression only starting framework v2.7.0 :esphomepr:`2610` by :ghuser:`OttoWinter`
- Bugfix tca9548a and idf refactor anh :esphomepr:`2612` by :ghuser:`andreashergert1984`
Release 2021.10.3 - October 27
------------------------------
- fixed dependency for pca9685 component :esphomepr:`2614` by :ghuser:`andreashergert1984`
- Bump platform-espressif8266 from 2.6.2 to 2.6.3 :esphomepr:`2620` by :ghuser:`OttoWinter`
- Autodetect flash size :esphomepr:`2615` by :ghuser:`agners`
- Teleinfo ptec :esphomepr:`2599` by :ghuser:`0hax`
- Fix glue code missing micros() :esphomepr:`2623` by :ghuser:`OttoWinter`
- Remove power and energy from sensors that are not true power :esphomepr:`2628` by :ghuser:`jesserockz`
- fix modbus output :esphomepr:`2630` by :ghuser:`martgras`
- Fix pin number validation for sn74hc595 :esphomepr:`2621` by :ghuser:`sairon`
- Fix select.set using lambda :esphomepr:`2633` by :ghuser:`jesserockz`
Full list of changes
--------------------

4
components/binary_sensor/gpio.rst
View File

@ -44,7 +44,9 @@ you can do so with the :ref:`Pin Schema <config-pin_schema>`.
- platform: gpio
pin:
number: D2
mode: INPUT_PULLUP
mode:
input: true
pullup: true
name: ...
Inverting Values

4
components/climate/ir_climate.rst
View File

@ -126,7 +126,9 @@ IR receiver.
pin:
number: GPIO14
inverted: true
mode: INPUT_PULLUP
mode:
input: true
pullup: true
# high 55% tolerance is recommended for some remote control units
tolerance: 55%

4
components/display/st7789v.rst
View File

@ -201,7 +201,9 @@ appropriate lines of C code in the lambda to hide or show the image or text as y
pin:
number: GPIO0
inverted: true
mode: INPUT_PULLUP
mode:
input: true
pullup: true
name: "T-Display Button Input 0"
id: tdisplay_button_input_0
- platform: gpio

2
components/esphome.rst
View File

@ -42,7 +42,7 @@ Advanced options:
to include in the project. See `platformio lib install <https://docs.platformio.org/en/latest/userguide/lib/cmd_install.html>`__.
The ``<name>=<source>`` syntax can be used to override the source used for a library that is included by a component.
- **comment** (*Optional*, string): Additional text information about this node. Only for display in UI.
- **name_add_mac_suffix** (*Optional*, boolean): Appends the last 6 bytes of the mac address of the device to
- **name_add_mac_suffix** (*Optional*, boolean): Appends the last 3 bytes of the mac address of the device to
the name in the form ``<name>-aabbcc``. Defaults to ``false``.
See :ref:`esphome-mac_suffix`.

19
components/mcp230xx.rst
View File

@ -36,7 +36,8 @@ The MCP23008 component (`datasheet <http://ww1.microchip.com/downloads/en/device
mcp23xxx: mcp23008_hub
# Use pin number 0
number: 0
mode: OUTPUT
mode:
output: true
inverted: false
# Individual inputs
@ -48,7 +49,8 @@ The MCP23008 component (`datasheet <http://ww1.microchip.com/downloads/en/device
# Use pin number 1
number: 1
# One of INPUT or INPUT_PULLUP
mode: INPUT
mode:
input: true
inverted: false
Configuration variables:
@ -98,7 +100,8 @@ has 16 GPIOs and can be configured the same way than the other variants.
mcp23016: mcp23016_hub
# Use pin number 0
number: 0
mode: OUTPUT
mode:
output: true
inverted: false
# Individual inputs
@ -109,7 +112,8 @@ has 16 GPIOs and can be configured the same way than the other variants.
mcp23016: mcp23016_hub
# Use pin number 1
number: 1
mode: INPUT
mode:
input: true
inverted: false
@ -157,7 +161,8 @@ binary sensor or GPIO switch.
mcp23xxx: mcp23017_hub
# Use pin number 0
number: 0
mode: OUTPUT
mode:
output: true
inverted: false
# Individual inputs
@ -169,7 +174,9 @@ binary sensor or GPIO switch.
# Use pin number 1
number: 1
# One of INPUT or INPUT_PULLUP
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: false
Configuration variables:

13
components/mcp23Sxx.rst
View File

@ -38,7 +38,8 @@ The MCP23S08 component (`datasheet <http://ww1.microchip.com/downloads/en/Device
# Use pin number 0
number: 0
# One of INPUT, INPUT_PULLUP or OUTPUT
mode: OUTPUT
mode:
output: true
inverted: false
# Individual inputs
@ -50,7 +51,8 @@ The MCP23S08 component (`datasheet <http://ww1.microchip.com/downloads/en/Device
# Use pin number 1
number: 1
# One of INPUT or INPUT_PULLUP
mode: INPUT
mode:
input: true
inverted: false
Configuration variables:
@ -103,7 +105,8 @@ binary sensor or GPIO switch.
mcp23xxx: mcp23s17_hub
# Use pin number 0
number: 0
mode: OUTPUT
mode:
output: true
inverted: false
# Individual inputs
@ -115,7 +118,9 @@ binary sensor or GPIO switch.
# Use pin number 1
number: 1
# One of INPUT or INPUT_PULLUP
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: false
Configuration variables:

3
components/output/ac_dimmer.rst
View File

@ -37,7 +37,8 @@ for example the `RobotDyn dimmer
gate_pin: D7
zero_cross_pin:
number: D6
mode: INPUT
mode:
input: true
inverted: yes
light:

3
components/pcf8574.rst
View File

@ -43,7 +43,8 @@ not work.
# Use pin number 0
number: 0
# One of INPUT or OUTPUT
mode: OUTPUT
mode:
output: true
inverted: false
Configuration variables:

6
components/remote_receiver.rst
View File

@ -51,7 +51,7 @@ Configuration variables:
- **memory_blocks** (*Optional*, int): The number of RMT memory blocks used. Only used on ESP32 platform. Defaults to
``3``.
- **filter** (*Optional*, :ref:`time <config-time>`): Filter any pulses that are shorter than this. Useful for removing
glitches from noisy signals. Defaults to ``10us``.
glitches from noisy signals. Defaults to ``50us``.
- **idle** (*Optional*, :ref:`time <config-time>`): The amount of time that a signal should remain stable (i.e. not
change) for it to be considered complete. Defaults to ``10ms``.
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation. Use this if you have
@ -260,7 +260,9 @@ Remote code selection (exactly one of these has to be included):
pin:
number: D4
inverted: true
mode: INPUT_PULLUP
mode:
input: true
pullup: true
dump: all

7
components/sx1509.rst
View File

@ -151,7 +151,9 @@ The outputs can in turn be used to add PWM-enabled lights like the monochromatic
sx1509: sx1509_hub1
# Use pin number 0 on the SX1509
number: 0
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
# Individual binary outputs
@ -163,7 +165,8 @@ The outputs can in turn be used to add PWM-enabled lights like the monochromatic
# Use pin number 1 on the SX1509
number: 1
# use as output for switch
mode: OUTPUT
mode:
output: true
inverted: false
# Individual outputs

1
components/tuya.rst
View File

@ -68,5 +68,6 @@ See Also
- :doc:`/components/switch/tuya`
- :doc:`/components/climate/tuya`
- :doc:`/components/binary_sensor/tuya`
- :doc:`/components/sensor/tuya`
- :apiref:`tuya/tuya.h`
- :ghedit:`Edit`

24
cookbook/brilliant-mirabella-genio-smart-plugs.rst
View File

@ -147,7 +147,9 @@ which these adaptions created by `@cryptelli <https://community.home-assistant.i
- platform: gpio
pin:
number: 14
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "Power Button"
on_press:
@ -202,7 +204,9 @@ which these adaptions created by `@cryptelli <https://community.home-assistant.i
- platform: gpio
pin:
number: GPIO13
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "Power Button"
on_press:
@ -321,7 +325,9 @@ Check the following page for calibrating the measurements: :ref:`sensor-filter-c
- platform: gpio
pin:
number: 14
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "Power Button"
on_press:
@ -398,13 +404,13 @@ Check the following page for calibrating the measurements: :ref:`sensor-filter-c
name: "${plug_name}_Relay"
pin: GPIO14
restore_mode: ALWAYS_ON
id: relay
id: relay
on_turn_on:
- switch.turn_on: red_led
- switch.turn_on: red_led
on_turn_off:
- switch.turn_off: red_led
- switch.turn_off: red_led
sensor:
- platform: hlw8012
@ -474,7 +480,9 @@ Check the following page for calibrating the measurements: :ref:`sensor-filter-c
- platform: gpio
pin:
number: 14
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "${item_name}_button"
on_press:
@ -513,7 +521,7 @@ Check the following page for calibrating the measurements: :ref:`sensor-filter-c
- platform: wifi_signal
name: "${item_name}_wifi_signal"
update_interval: 60s
4. Adding to Home Assistant
---------------------------

6
cookbook/esw01-eu.rst
View File

@ -57,7 +57,7 @@ and calculating the current with `Ohm's law <https://en.wikipedia.org/wiki/Ohm%2
# D7 GPIO13 | HLW8012/CF | cf_pin
status_led:
pin:
pin:
number: GPIO5
output:
@ -83,7 +83,9 @@ and calculating the current with `Ohm's law <https://en.wikipedia.org/wiki/Ohm%2
id: button1
pin:
number: GPIO14
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
on_press:
- switch.toggle: switch1

6
cookbook/ilonda-wifi-smart-fish-feeder.rst
View File

@ -13,7 +13,7 @@ firmware can be uploaded allowing you to control the Wifi Smart Fish Feeder via
Wifi Smart Fish Feeder Configuration
------------------------------------
Thanks to the amazing `Tasmota template <https://templates.blakadder.com/ilonda_L88.html>`__,
Thanks to the amazing `Tasmota template <https://templates.blakadder.com/ilonda_L88.html>`__,
managed to build a fully working esphome configuration. This assumes you have a secret.yaml with ssid and password keys.
.. code-block:: yaml
@ -39,7 +39,9 @@ managed to build a fully working esphome configuration. This assumes you have a
id: button
pin:
number: GPIO4
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: True
name: 'Switch feeder'
on_press:

4
cookbook/sonoff-basic-light-switch.rst
View File

@ -117,7 +117,9 @@ Now you have a pair of wires from the GPIO and 0V to your retractive switch lets
- platform: gpio
pin:
number: GPIO14
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
id: button_1
on_press:

16
cookbook/sonoff-dual-light-switch.rst
View File

@ -97,7 +97,9 @@ The R1 version of the Dual controls the relays via the UART, so the code gets a
- platform: gpio
pin:
number: GPIO4
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
id: button_1
on_press:
@ -107,7 +109,9 @@ The R1 version of the Dual controls the relays via the UART, so the code gets a
- platform: gpio
pin:
number: GPIO14
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
id: button_2
on_press:
@ -196,7 +200,9 @@ It's basically the same as the :doc:`T2 </cookbook/sonoff-t1-3>`
- platform: gpio
pin:
number: GPIO0
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
id: button
on_press:
@ -206,7 +212,9 @@ It's basically the same as the :doc:`T2 </cookbook/sonoff-t1-3>`
- platform: gpio
pin:
number: GPIO14
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
id: button
on_press:

4
cookbook/sonoff-fishpond-pump.rst
View File

@ -115,7 +115,9 @@ Here is the configuration with the basic operations outlined above.
name: "esp_fishpond_gpio14"
pin:
number: 14
mode: INPUT_PULLUP
mode:
input: true
pullup: true
on_press:
- switch.turn_off: esp_fishpond_pump

25
cookbook/sonoff-t1-3.rst
View File

@ -36,7 +36,9 @@ T1
- platform: gpio
pin:
number: GPIO0
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
id: button_1
on_press:
@ -99,7 +101,9 @@ T2
- platform: gpio
pin:
number: GPIO0
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
id: button_1
on_press:
@ -109,7 +113,9 @@ T2
- platform: gpio
pin:
number: GPIO9
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
id: button_2
on_press:
@ -170,7 +176,9 @@ T3
- platform: gpio
pin:
number: GPIO0
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
id: button_1
on_press:
@ -180,7 +188,9 @@ T3
- platform: gpio
pin:
number: GPIO9
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
id: button_2
on_press:
@ -190,7 +200,9 @@ T3
- platform: gpio
pin:
number: GPIO10
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
id: button_3
on_press:
@ -241,4 +253,3 @@ See Also
- :doc:`/cookbook/sonoff-light-switch`
- :doc:`/guides/automations`
- :doc:`/devices/sonoff_t1_uk_3gang_v1.1`

16
devices/sonoff_4ch.rst
View File

@ -243,25 +243,33 @@ of the basic functions.
- platform: gpio
pin:
number: GPIO0
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "Sonoff 4CH Button 1"
- platform: gpio
pin:
number: GPIO9
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "Sonoff 4CH Button 2"
- platform: gpio
pin:
number: GPIO10
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "Sonoff 4CH Button 3"
- platform: gpio
pin:
number: GPIO14
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "Sonoff 4CH Button 4"
- platform: status

16
devices/sonoff_4ch.yaml
View File

@ -17,7 +17,9 @@ binary_sensor:
- platform: gpio
pin:
number: GPIO0
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "Sonoff 4CH Button 1"
on_press:
@ -25,7 +27,9 @@ binary_sensor:
- platform: gpio
pin:
number: GPIO9
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "Sonoff 4CH Button 2"
on_press:
@ -33,7 +37,9 @@ binary_sensor:
- platform: gpio
pin:
number: GPIO10
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "Sonoff 4CH Button 3"
on_press:
@ -41,7 +47,9 @@ binary_sensor:
- platform: gpio
pin:
number: GPIO14
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "Sonoff 4CH Button 4"
on_press:

4
devices/sonoff_basic.rst
View File

@ -70,7 +70,9 @@ exposes all of the basic functions.
- platform: gpio
pin:
number: GPIO0
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "Sonoff Basic Button"
on_press:

4
devices/sonoff_s20.rst
View File

@ -225,7 +225,9 @@ of the basic functions.
- platform: gpio
pin:
number: GPIO0
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "Sonoff S20 Button"
- platform: status

4
devices/sonoff_s20.yaml
View File

@ -18,7 +18,9 @@ binary_sensor:
- platform: gpio
pin:
number: GPIO0
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "Sonoff S20 Button"
on_press:

12
devices/sonoff_t1_uk_3gang_v1.1.rst
View File

@ -246,19 +246,25 @@ of the basic functions.
- platform: gpio
pin:
number: GPIO0
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "Sonoff T1 UK 3 Gang Touchpad 1"
- platform: gpio
pin:
number: GPIO9
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "Sonoff T1 UK 3 Gang Touchpad 2"
- platform: gpio
pin:
number: GPIO10
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "Sonoff T1 UK 3 Gang Touchpad 3"
- platform: status

12
devices/sonoff_t1_uk_3gang_v1.1.yaml
View File

@ -24,7 +24,9 @@ binary_sensor:
- platform: gpio
pin:
number: GPIO0
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "Sonoff T1 UK 3 Gang Touchpad 1"
on_press:
@ -32,7 +34,9 @@ binary_sensor:
- platform: gpio
pin:
number: GPIO9
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "Sonoff T1 UK 3 Gang Touchpad 2"
on_press:
@ -40,7 +44,9 @@ binary_sensor:
- platform: gpio
pin:
number: GPIO10
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "Sonoff T1 UK 3 Gang Touchpad 3"
on_press:

12
devices/sonoff_t3_eu_3gang_v1.0.rst
View File

@ -250,19 +250,25 @@ of the basic functions.
- platform: gpio
pin:
number: GPIO0
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "Sonoff T3 EU 3 Gang Touchpad 1"
- platform: gpio
pin:
number: GPIO9
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "Sonoff T3 EU 3 Gang Touchpad 2"
- platform: gpio
pin:
number: GPIO10
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "Sonoff T3 EU 3 Gang Touchpad 3"
- platform: status

12
devices/sonoff_t3_eu_3gang_v1.0.yaml
View File

@ -24,7 +24,9 @@ binary_sensor:
- platform: gpio
pin:
number: GPIO0
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "Sonoff T3 EU 3 Gang Touchpad 1"
on_press:
@ -32,7 +34,9 @@ binary_sensor:
- platform: gpio
pin:
number: GPIO9
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "Sonoff T3 EU 3 Gang Touchpad 2"
on_press:
@ -40,7 +44,9 @@ binary_sensor:
- platform: gpio
pin:
number: GPIO10
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
name: "Sonoff T3 EU 3 Gang Touchpad 3"
on_press:

4
devices/teckin.yaml
View File

@ -21,7 +21,9 @@ binary_sensor:
name: "Teckin Button"
pin:
number: GPIO1
mode: INPUT_PULLUP
mode:
input: true
pullup: true
inverted: true
on_press:
- switch.toggle: relay

10
guides/creators.rst
View File

@ -12,8 +12,12 @@ Example configuration
.. code-block:: yaml
# These substitutions allow the end user to override certain values
substitutions:
name: "jesses-temperature-monitor"
esphome:
...
name: "${name}"
# Automatically add the mac address to the name
# so you can use a single firmware for all devices
name_add_mac_suffix: true
@ -26,13 +30,13 @@ Example configuration
# This should point to the public location of this yaml file.
dashboard_import:
package_import_url: github://jesserockz/dummy-esphome-configs@v1/temperature-monitor.yaml
package_import_url: github://jesserockz/dummy-esphome-configs/temperature-monitor.yaml@v6
wifi:
# Set up a wifi access point
ap:
ssid: jesses_temperature_monitor
password: 12345678
password: "12345678"
# In combination with the `ap` this allows the user
# to provision wifi credentials to the device.

6
guides/getting_started_command_line.rst
View File

@ -19,7 +19,7 @@ Installing ESPHome is very easy. All you need to do is have `Python
.. note::
Python 3.7 or above is required to install ESPHome 1.18.0 or above.
.. code-block:: bash
@ -127,7 +127,9 @@ Sensor </components/binary_sensor/gpio>`.
pin:
number: 16
inverted: true
mode: INPUT_PULLUP
mode:
input: true
pullup: true
This is an advanced feature of ESPHome. Almost all pins can
optionally have a more complicated configuration schema with options for

4
guides/getting_started_hassio.rst
View File

@ -133,7 +133,9 @@ Sensor </components/binary_sensor/gpio>`.
pin:
number: 16
inverted: true
mode: INPUT_PULLUP
mode:
input: true
pullup: true
This time when installing, you don’t need to have the device plugged in
through USB again. The upload will happen wirelessly (:doc:`"over the air" </components/ota>`).

14
guides/supporters.rst
View File

@ -61,7 +61,7 @@ Contributors
- `Andrzej (@andriej) <https://github.com/andriej>`__
- `Andreas (@anduchs) <https://github.com/anduchs>`__
- `anekinloewe (@anekinloewe) <https://github.com/anekinloewe>`__
- `Angel Nunez Mencias (@angelnu) <https://github.com/angelnu>`__
- `Vegetto (@angelnu) <https://github.com/angelnu>`__
- `Sergey Anisimov (@anisimovsergey) <https://github.com/anisimovsergey>`__
- `ankycooper (@ankycooper) <https://github.com/ankycooper>`__
- `Nikolay Vasilchuk (@Anonym-tsk) <https://github.com/Anonym-tsk>`__
@ -121,6 +121,7 @@ Contributors
- `Christian Taedcke (@chrta) <https://github.com/chrta>`__
- `Pavel Skuratovich (@Chupaka) <https://github.com/Chupaka>`__
- `John (@CircuitSetup) <https://github.com/CircuitSetup>`__
- `Colby Rome (@cisasteelersfan) <https://github.com/cisasteelersfan>`__
- `Chris Debenham (@cjd) <https://github.com/cjd>`__
- `CODeRUS (@CODeRUS) <https://github.com/CODeRUS>`__
- `Cody James (@codyjamestechnical) <https://github.com/codyjamestechnical>`__
@ -337,7 +338,7 @@ Contributors
- `Jonathan Adams (@jonathanadams) <https://github.com/jonathanadams>`__
- `Jonathan Treffler (@JonathanTreffler) <https://github.com/JonathanTreffler>`__
- `JonnyaiR (@jonnyair) <https://github.com/jonnyair>`__
- `Joppy Furr (@JoppyFurr) <https://github.com/JoppyFurr>`__
- `Joppy (@JoppyFurr) <https://github.com/JoppyFurr>`__
- `jsuanet (@jsuanet) <https://github.com/jsuanet>`__
- `junnikokuki (@junnikokuki) <https://github.com/junnikokuki>`__
- `Justahobby01 (@Justahobby01) <https://github.com/Justahobby01>`__
@ -372,7 +373,7 @@ Contributors
- `Kodey Converse (@krconv) <https://github.com/krconv>`__
- `krikk (@krikk) <https://github.com/krikk>`__
- `KristopherMackowiak (@KristopherMackowiak) <https://github.com/KristopherMackowiak>`__
- `Stefan Rado (@kroimon) <https://github.com/kroimon>`__
- `kroimon (@kroimon) <https://github.com/kroimon>`__
- `krunkel (@krunkel) <https://github.com/krunkel>`__
- `Kendell R (@KTibow) <https://github.com/KTibow>`__
- `Jakub Šimo (@kubik369) <https://github.com/kubik369>`__
@ -550,7 +551,7 @@ Contributors
- `Leandro Puerari (@puerari) <https://github.com/puerari>`__
- `puuu (@puuu) <https://github.com/puuu>`__
- `Qc (@qc24) <https://github.com/qc24>`__
- `qqgg231 (@qqgg231) <https://github.com/qqgg231>`__
- `Karol Zlot (@qqgg231) <https://github.com/qqgg231>`__
- `Tommy Jonsson (@quazzie) <https://github.com/quazzie>`__
- `Quentin Stafford-Fraser (@quentinsf) <https://github.com/quentinsf>`__
- `Quinn Hosler (@quinnhosler) <https://github.com/quinnhosler>`__
@ -628,7 +629,6 @@ Contributors
- `Luca Zimmermann (@soundstorm) <https://github.com/soundstorm>`__
- `Sourabh Jaiswal (@sourabhjaiswal) <https://github.com/sourabhjaiswal>`__
- `Philip Allgaier (@spacegaier) <https://github.com/spacegaier>`__
- `spattinson (@spattinson) <https://github.com/spattinson>`__
- `Stephan Peijnik-Steinwender (@speijnik) <https://github.com/speijnik>`__
- `spilin (@spilin) <https://github.com/spilin>`__
- `square99 (@square99) <https://github.com/square99>`__
@ -696,7 +696,7 @@ Contributors
- `Seppel Hardt (@tuxBurner) <https://github.com/tuxBurner>`__
- `Thorsten von Eicken (@tve) <https://github.com/tve>`__
- `Tyler Menezes (@tylermenezes) <https://github.com/tylermenezes>`__
- `wuuker (@ukewea) <https://github.com/ukewea>`__
- `ukewea (@ukewea) <https://github.com/ukewea>`__
- `Vc (@Valcob) <https://github.com/Valcob>`__
- `Nad (@valordk) <https://github.com/valordk>`__
- `Víctor Ferrer García (@vicfergar) <https://github.com/vicfergar>`__
@ -734,4 +734,4 @@ Contributors
- `ZTX18 (@ZTX18) <https://github.com/ZTX18>`__
- `Christian Zufferey (@zuzu59) <https://github.com/zuzu59>`__
*This page was last updated October 22, 2021.*
*This page was last updated October 27, 2021.*