diff --git a/components/api.rst b/components/api.rst index 7df6f8d6c..acbffd228 100644 --- a/components/api.rst +++ b/components/api.rst @@ -66,13 +66,50 @@ Configuration variables: the ESP is connected to the network, when in fact it is not - only a full reboot fixes it. Can be disabled by setting this to ``0s``. Defaults to ``15min``. - **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation. -- **password** (*Optional*, **Deprecated**, string): The password to protect the API Server with. Defaults to no password. - It is recommended to use the ``encryption`` -> ``key`` above instead of the the ``password``. +- **password** (*Optional*, **Deprecated**, string): The password to protect the API Server with. Defaults + to no password. It is recommended to use the ``encryption`` -> ``key`` above instead of the the ``password``. +- **on_client_connected** (*Optional*, :ref:`Action `): An automation to perform when a client + connects to the API. See :ref:`api-on_client_connected_trigger`. +- **on_client_disconnected** (*Optional*, :ref:`Action `): An automation to perform when a client + disconnects from the API. See :ref:`api-on_client_disconnected_trigger`. + +.. _api-actions: + +Actions +------- + +.. _api-homeassistant_event_action: + +``homeassistant.event`` Action +****************************** + +When using the native API with Home Assistant, you can create events in the Home Assistant event bus +straight from ESPHome :ref:`Automations `. + +.. code-block:: yaml + + # In some trigger + on_...: + # Simple + - homeassistant.event: + event: esphome.button_pressed + data: + message: Button was pressed + +Configuration variables: +```````````````````````` + +- **event** (**Required**, string): The event to create - must begin with ``esphome.`` +- **data** (*Optional*, mapping): Optional *static* data to pass along with the event. +- **data_template** (*Optional*, mapping): Optional template data to pass along with the event. + This is evaluated on the Home Assistant side with Home Assistant's templating engine. +- **variables** (*Optional*, mapping): Optional variables that can be used in the ``data_template``. + Values are :ref:`lambdas ` and will be evaluated before sending the request. .. _api-homeassistant_service_action: ``homeassistant.service`` Action --------------------------------- +******************************** When using the native API with Home Assistant, you can create Home Assistant service calls straight from ESPHome :ref:`Automations `. @@ -97,7 +134,8 @@ calls straight from ESPHome :ref:`Automations `. my_variable: |- return id(my_sensor).state; -Configuration options: +Configuration variables: +```````````````````````` - **service** (**Required**, string): The Home Assistant `Service `__ to call. @@ -126,7 +164,7 @@ the parameters in plain format. - '{{ green }}' - '{{ blue }}' -Then in ESPHome +Then, in ESPHome: .. code-block:: yaml @@ -140,6 +178,75 @@ Then in ESPHome green: '199' blue: '71' +.. _api-homeassistant_tag_scanned_action: + +``homeassistant.tag_scanned`` Action +************************************ + +When using the native API with Home Assistant, you can push tag_scanned to Home Assistant +straight from ESPHome :ref:`Automations `. + +.. code-block:: yaml + + # In some trigger + on_...: + # Simple + - homeassistant.tag_scanned: some-tag + +Configuration variables: +```````````````````````` + +- **tag** (**Required**, :ref:`templatable `, string): The id of the scanned tag + +Triggers +-------- + +.. _api-on_client_connected_trigger: + +``on_client_connected`` Trigger +******************************* + +This trigger is activated each time a client connects to the API. + +.. code-block:: yaml + + api: + # ... + on_client_connected: + - logger.log: "API client connected!" + +.. _api-on_client_disconnected_trigger: + +``on_client_disconnected`` Trigger +********************************** + +This trigger is activated each time the API disconnects from the API. + +.. code-block:: yaml + + api: + # ... + on_client_disconnected: + - logger.log: "API client disconnected!" + +.. _api-connected_condition: + +``api.connected`` Condition +--------------------------- + +This :ref:`Condition ` checks if at least one client is connected to the ESPHome +native API. Please note client not only includes Home Assistant, but also ESPHome's OTA log output +if logs are shown remotely. + +.. code-block:: yaml + + on_...: + if: + condition: + api.connected: + then: + - logger.log: API is connected! + .. _api-services: User-defined Services @@ -208,25 +315,6 @@ Each of these also exist in array form: - bool[]: An array of boolean values. C++ type: ``std::vector`` - ... - Same for other types. -.. _api-connected_condition: - -``api.connected`` Condition ---------------------------- - -This :ref:`Condition ` checks if at least one client is connected to the ESPHome -native API. Please note client not only includes Home Assistant, but also ESPHome's OTA log output -if logs are shown remotely. - -.. code-block:: yaml - - on_...: - if: - condition: - api.connected: - then: - - logger.log: API is connected! - - Advantages over MQTT -------------------- @@ -245,54 +333,6 @@ never be removed. Features of native API (vs. MQTT): - **Low Latency:** The native API is optimized for very low latency, usually this is only a couple of milliseconds and far less than can be noticed by the eye. - -.. _api-homeassistant_event_action: - -``homeassistant.event`` Action ------------------------------- - -When using the native API with Home Assistant, you can create events in the Home Assistant event bus -straight from ESPHome :ref:`Automations `. - -.. code-block:: yaml - - # In some trigger - on_...: - # Simple - - homeassistant.event: - event: esphome.button_pressed - data: - message: Button was pressed - -Configuration options: - -- **event** (**Required**, string): The event to create - must begin with ``esphome.`` -- **data** (*Optional*, mapping): Optional *static* data to pass along with the event. -- **data_template** (*Optional*, mapping): Optional template data to pass along with the event. - This is evaluated on the Home Assistant side with Home Assistant's templating engine. -- **variables** (*Optional*, mapping): Optional variables that can be used in the ``data_template``. - Values are :ref:`lambdas ` and will be evaluated before sending the request. - - -.. _api-homeassistant_tag_scanned_action: - -``homeassistant.tag_scanned`` Action ------------------------------------- - -When using the native API with Home Assistant, you can push tag_scanned to Home Assistant -straight from ESPHome :ref:`Automations `. - -.. code-block:: yaml - - # In some trigger - on_...: - # Simple - - homeassistant.tag_scanned: some-tag - -Configuration options: - -- **tag** (**Required**, :ref:`templatable `, string): The id of the scanned tag - See Also -------- diff --git a/guides/automations.rst b/guides/automations.rst index 8e585928e..eb01fb168 100644 --- a/guides/automations.rst +++ b/guides/automations.rst @@ -323,7 +323,7 @@ if it fails to connect to the network without a reboot) All Triggers ------------ -- :ref:`api.services ` +- :ref:`api.services ` / :ref:`api.on_client_connected ` / :ref:`api.on_client_disconnected ` - :ref:`sensor.on_value ` / :ref:`sensor.on_raw_value ` / :ref:`sensor.on_value_range ` - :ref:`binary_sensor.on_press ` / :ref:`binary_sensor.on_release ` / :ref:`binary_sensor.on_state `