diff --git a/components/display/inkplate6.rst b/components/display/inkplate6.rst
index 803a5d268..df467cc86 100644
--- a/components/display/inkplate6.rst
+++ b/components/display/inkplate6.rst
@@ -1,13 +1,14 @@
-Inkplate 6 and Inkplate 10
-==========================
+Inkplate 6, 10 and 6 Plus
+=========================
.. seo::
:description: Instructions for setting up Inkplate E-Paper displays in ESPHome.
:image: inkplate6.jpg
-All-in-one e-paper display ``Inkplate 6`` and ``Inkplate 10``.
+All-in-one e-paper display ``Inkplate 6``, ``Inkplate 10`` and ``Inkplate 6 Plus``.
-The Inkplate 6 and Inkplate 10 are powerful, Wi-Fi enabled ESP32 based six-inch e-paper displays – recycled from a Kindle e-reader. Its main feature is simplicity.
+The Inkplate 6, 10 and 6 Plus are powerful, Wi-Fi enabled ESP32 based six-inch e-paper displays -
+recycled from a Kindle e-reader. Its main feature is simplicity.
Learn more at `Inkplate's website `__
@@ -73,7 +74,11 @@ Configuration variables:
************************
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-- **model** (*Optional*, enum): Specify the model ``inkplate_6`` or ``inkplate_10``. Defaults to ``inkplate_6``.
+- **model** (*Optional*, enum): Specify the model. Defaults to ``inkplate_6``.
+ - ``inkplate_6``
+ - ``inkplate_10``
+ - ``inkplate_6_plus``
+
- **greyscale** (*Optional*, boolean): Makes the screen display 3 bit colors. Defaults to ``false``
- **partial_updating** (*Optional*, boolean): Makes the screen update partially, which is faster, but leaves burnin. Defaults to ``false``
- **full_update_every** (*Optional*, int): When partial updating is enabled, forces a full screen update after chosen number of updates. Defaults to ``10``
@@ -113,8 +118,8 @@ Configuration variables:
Defaults to GPIO27.
-Complete example
-****************
+Complete Inkplate 6 example
+***************************
The following is a complete example YAML configuration that does a few things beyond the usual
Wi-Fi, API, and OTA configuration.
@@ -273,9 +278,33 @@ Wi-Fi, API, and OTA configuration.
}
+Inkplate 6 Plus Touchscreen
+***************************
+
+The Inkplate 6 Plus has a built in touchscreen supported by ESPHome.
+Below is a config example:
+
+.. code-block:: yaml
+
+ touchscreen:
+ - platform: ektf2232
+ interrupt_pin: GPIO36
+ rts_pin:
+ mcp23xxx: mcp23017_hub
+ number: 10
+ on_touch:
+ - logger.log:
+ format: "Touch: {x}, {y}"
+ args:
+ - touch.x
+ - touch.y
+
+
+
See Also
--------
- :doc:`index`
+- :doc:`/components/touchscreen/ektf2232`
- `Arduino Inkplate 6 library `__ by `E-radionica.com `__
- :ghedit:`Edit`