From 30ae8e56988534cbd7bda5e3f0d36030a7aff1e6 Mon Sep 17 00:00:00 2001 From: Anton Viktorov Date: Fri, 12 Jul 2024 21:42:48 +0000 Subject: [PATCH] LTR390 separate ALS and UV gain and resolution (#4012) --- components/sensor/ltr390.rst | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/components/sensor/ltr390.rst b/components/sensor/ltr390.rst index 4b6933d75..d80ed2117 100644 --- a/components/sensor/ltr390.rst +++ b/components/sensor/ltr390.rst @@ -44,6 +44,28 @@ Configuration variables: - **update_interval** (*Optional*, :ref:`config-time`): The interval to check the sensor. Defaults to ``60s``. It is recommended that the update interval is at least 1 second since updates can take up to 800ms when using a high resolution value. +Granular control over gain and resolution +......................................... +By default, the ``gain`` and ``resolution`` parameters set same values for both ALS and UV measurements. In real life scenarios there might be significant +differences in the light intensity and UV index, so it is recommended to use different gain and resolution values for ALS and for UV sensor to avoid saturation. +See the example below, where the gain and resolution are set to different values for ALS and UV sensors.: + +.. code-block:: yaml + + sensor: + - platform: ltr390 + uv: + name: "UV Sensor Counts" + ambient_light: + name: "Light Sensor Counts" + gain: + ambient_light: X9 + uv: X3 + resolution: + ambient_light: 18 + uv: 13 + + Lux and UVI Formulas --------------------