Merge branch 'current' into next

components/alarm_control_panel/template.rst

@@ -26,9 +26,10 @@ Configuration variables:
 
 - **codes** (*Optional*, list of string): A list of codes for disarming the alarm, if *requires_code_to_arm* set to true then for arming the alarm too.
 - **requires_code_to_arm** (*Optional*, boolean): Code required for arming the alarm, *codes* must be provided.
-- **arming_time** (*Optional*, :ref:`config-time`): The exit delay before the alarm is armed.
+- **arming_away_time** (*Optional*, :ref:`config-time`): The exit delay before the alarm is armed to away mode. Defaults to ``0s``.
-- **pending_time** (*Optional*, :ref:`config-time`): The entry delay before the alarm is triggered.
+- **arming_home_time** (*Optional*, :ref:`config-time`): The exit delay before the alarm is armed to home mode.  
-- **trigger_time** (*Optional*, :ref:`config-time`): The time after a triggered alarm before resetting to previous state if the sensors are cleared/off.
+- **pending_time** (*Optional*, :ref:`config-time`): The entry delay before the alarm is triggered. Defaults to ``0s``.
+- **trigger_time** (*Optional*, :ref:`config-time`): The time after a triggered alarm before resetting to previous state if the sensors are cleared/off. Defaults to ``0s``.
 - **binary_sensors** (*Optional*, *list*): A list of binary sensors the panel should use. Each consists of:
 
   - **input** (**Required**, string): The id of the binary sensor component

components/display/index.rst

@@ -672,7 +672,9 @@ Configuration variables:
 - **file** (**Required**, string):
 
   - **Local files**: The path (relative to where the .yaml file is) of the image file.
-  - **Material Design Icons**: Specify the `Material Design Icon <https://pictogrammers.com/library/mdi/>`_ id in the format ``mdi:icon-name``, and that icon will automatically be downloaded and added to the configuration.
+  - **Material Design Icons**: Specify the `Material Design Icon <https://pictogrammers.com/library/mdi/>`_
+    id in the format ``mdi:icon-name``, and that icon will automatically be downloaded and added to the configuration.
+  
 - **id** (**Required**, :ref:`config-id`): The ID with which you will be able to reference the image later
   in your display code.
 - **resize** (*Optional*, string): If set, this will resize the image to fit inside the given dimensions ``WIDTHxHEIGHT``

components/max6956.rst

@@ -51,8 +51,9 @@ Configuration variables:
   Defaults to ``global``  
 
 
-Binary Sensor
+Binary Sensor Example
--------------
+---------------------
+
 ``max6956`` pins can be use as binary sensor. Individual pullup are supported.
 
 .. code-block:: yaml
@@ -83,8 +84,9 @@ Binary Sensor
           inverted: False
 
 
-Switch
+Switch Example
--------------
+--------------
+
 ``max6956`` pins can be use as switch.
 
 .. code-block:: yaml
@@ -113,8 +115,9 @@ Switch
             inverted: False 
 
 
-Led driver
+Led driver Example
--------------
+------------------
+
 ``max6956`` can control a constant-current sink to drive leds, with 16 equal steps from 1.5mA to 24mA.
 
 

components/sensor/tmp1075.rst

@@ -57,6 +57,7 @@ Configuration variables:
   checks the sensor. Possible values are ``27.5ms``, ``55ms``, ``110ms``, and
   ``220ms``. Defaults to ``27.5ms``.
 - **alert** (*Optional*): Configure the alert pin behaviour.
+  
     - **function** (*Optional*, enum): Function of the alert pin, either ``comparator`` or ``interrupt``. Defaults to ``comparator``.
     - **polarity** (*Optional*, enum): Polarity of the alert pin, either ``active_high`` or ``active_low``. Defaults to ``active_high``.
     - **limit_low** (*Optional*, int): Lower temperature limit, in °C. Defaults to ``-128`` (the lowest possible limit value).

components/speaker/index.rst

@@ -51,8 +51,8 @@ This action will start playing raw audio data from the speaker.
 
 Configuration variables:
 
-**id** (*Optional*, :ref:`config-id`): The speaker to control. Defaults to the only one in YAML.
+- **id** (*Optional*, :ref:`config-id`): The speaker to control. Defaults to the only one in YAML.
-**data** (*Required*, list of bytes): The raw audio data to play.
+- **data** (**Required**, list of bytes): The raw audio data to play.
 
 .. _speaker-stop:
 
@@ -71,7 +71,7 @@ your configuration YAML.
 
 Configuration variables:
 
-**id** (*Optional*, :ref:`config-id`): The speaker to check. Defaults to the only one in YAML.
+- **id** (*Optional*, :ref:`config-id`): The speaker to check. Defaults to the only one in YAML.
 
 .. _speaker-is_playing:
 

schema_doc.py

@@ -83,6 +83,8 @@ PLATFORMS_TITLES = {
     "I²C": "i2c",
     "Media Player": "media_player",
     "Microphone": "microphone",
+    "Speaker": "speaker",
+    "Alarm Control Panel": "alarm_control_panel",
 }
 
 CUSTOM_DOCS = {
@@ -196,6 +198,9 @@ CUSTOM_DOCS = {
     "components/display_menu/lcd_menu": {
         "LCD Menu": "lcd_menu.schemas.CONFIG_SCHEMA",
     },
+    "components/alarm_control_panel/index": {
+        "Base Alarm Control Panel Configuration": "template.alarm_control_panel.schemas.CONFIG_SCHEMA",
+    },
 }
 
 REQUIRED_OPTIONAL_TYPE_REGEX = r"(\(((\*\*Required\*\*)|(\*Optional\*))(,\s(.*))*)\):\s"
@@ -623,6 +628,10 @@ class SchemaGeneratorVisitor(nodes.NodeVisitor):
             ):  # props are right for typed components so far
                 c = self.json_component
                 if c:
+                    if self.component in c:
+                        c = c[self.component]["schemas"][
+                            self.component.upper() + "_SCHEMA"
+                        ]
                     trigger_schema = self.find_props(c).get(key)
                     if trigger_schema is not None:
                         self.props = self.find_props(trigger_schema)