Cookbook Guide for Brilliant / Mirabella Genio Smart Plugs (#195)

* Cookbook Guide for Brilliant / Mirabella Genio Smart Plugs

* Fix documentation error

* Fix linting errors

* Simplified configuration and remove invalid component

cookbook/brilliant-mirabella-genio-smart-plugs.rst

@@ -0,0 +1,240 @@
+Brilliant / Mirabella Genio Smart Plugs
+=======================================
+
+Brilliant / Mirabella Genio Smart Plugs are a tuya based smart plugs sold by Bunnings and Kmart respectively in Australia.
+
+.. figure:: images/brilliant-mirabella-genio-smart-plugs.jpg
+    :align: center
+    :width: 50.0%
+
+Originally intended to be used with their companion apps once flashed using `tuya-convert <https://github.com/ct-Open-Source/tuya-convert>`__ ESPHome generated
+firmware can be uploaded allowing you to control the smart plugs via Home Assistant.
+
+1. Create the ESPHome Firmware
+------------------------------
+
+#. Refer to either :doc:`/guides/getting_started_command_line` or :doc:`/guides/getting_started_hassio` before moving onto the next step.
+#. Select a plug configuration below based on the plug/s you have and copy all of the text in the code block and paste into your
+   ``name_of_esphome_configuration.yaml`` file.
+#. Compile the firmware, again depending on your chosen setup refer to the guides in the first point.
+
+2. Flashing
+-----------
+
+2.1 Prerequisites
+*****************
+
+#. Before you begin you'll need one of the following linux machines running the latest copy of `Raspbian Stretch Lite
+   <https://www.raspberrypi.org/downloads/raspbian/>`__
+
+  a. Raspberry Pi 2B/B+ with `USB WiFi Dongle <https://www.raspberrypi.org/products/raspberry-pi-usb-wifi-dongle/>`__.
+  b. Raspberry Pi 3B/B+.
+
+.. note::
+
+    As per the `tuya-convert documentation <https://github.com/ct-Open-Source/tuya-convert/blob/master/README.md#requirements>`__:
+
+    Any Linux with a Wifi adapter which can act as an Access Point should also work. Please note that we have tested the Raspberry Pi with clean installations
+    only. If you use your Raspberry Pi for anything else, we recommend using another SD card with a clean installation.
+
+#. A microSD card (minimum 2GB, 8GB+ recommended).
+#. Any WiFi device which can connect to the SSID generated by the Raspberry Pi and eventually the flashed tuya device. **This cannot be an iOS / Apple device.
+   Android devices will work.**
+
+2.2 Installing the OS
+*********************
+
+#. It's recommended to read the documentation provided by the Raspberry Pi Foundation on the best way to flash the OS to the microSD card depending on your
+   platform - `Installing operating system images <https://www.raspberrypi.org/documentation/installation/installing-images/>`__.
+#. After you've flashed the microSD card browse to the "boot" partition and add a blank file called "ssh" **(without any extension)** which will enable the
+   SSH server upon first boot, extended information on this step can be found `here
+   <https://www.raspberrypi.org/documentation/remote-access/ssh/README.md#3-enable-ssh-on-a-headless-raspberry-pi-add-file-to-sd-card-on-another-machine>`__.
+#. Plug the microSD card into the Raspberry Pi, connect network cable and power, the Raspberry Pi will start to boot.
+
+2.3 Connecting to the Pi via SSH
+********************************
+
+#. Download and install `Putty <https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html>`__.
+#. Open Putty.
+#. Enter the IP of Raspberry Pi in the box that says "Host Name", leaving the port set to 22 (default for SSH). A list of recommended ways can be found `here
+   <https://www.raspberrypi.org/documentation/remote-access/ip-address.md>`__, but the easiest is to download and use `Fing <https://www.fing.com/>`__
+   (`Android <https://play.google.com/store/apps/details?id=com.overlook.android.fing&hl=en_GB>`__ / `iOS
+   <https://itunes.apple.com/us/app/fing-network-scanner/id430921107?mt=8>`__).
+#. In the "Saved Sessions" input box, name the Raspberry Pi connection and then press "Save".
+#. Select your new saved session from the list.
+#. Press "Open".
+
+2.4 Configuring the Pi
+**********************
+
+#. In the putty window login with the **pi** as the user and **raspberry** for the password.
+#. Type ``sudo apt-get update && sudo apt-get dist-upgrade -y`` and wait for the upgrades to install.
+#. Type ``sudo apt-get install git`` and wait for it to install.
+
+2.5 Setup and Install tuya-convert
+**********************************
+
+#. In the putty window type ``git clone https://github.com/ct-Open-Source/tuya-convert`` press enter and wait while the repository is cloned.
+#. Type ``cd tuya-convert`` and press enter.
+#. Type ``./install_prereq.sh`` press enter and wait as the script gathers all the required components needed to function.
+
+2.6 Upload ESPHome Firmware using SFTP
+**************************************
+
+#. Download `FileZilla <https://filezilla-project.org/download.php?type=client>`__ or `WinSCP <https://winscp.net/eng/index.php>`__ or use your preferred FTP
+   client.
+#. Depending on the program you need to connect to the Pi using the IP address as the hostname and the username and password the same as you used to connect
+   via SSH and ensure your connection type is set to **SFTP**
+#. Browse to ``/root/tuya-convert/files``.
+#. Upload your compiled ``firmware.bin`` file to this directory. For command line based installs you can access the file under
+   ``<CONFIG_DIR>/<NODE_NAME>/.pioenvs/<NODE_NAME>/firmware.bin`` alternatively Hass.io users can download the file directly from the web ui.
+
+2.7 Use tuya-convert to install ESPHome Firmware
+************************************************
+
+#. Type ``./start_flash.sh``
+#. Type ``yes`` to accept the warning.
+#. Connect your alternative WiFi device (non iOS / Apple based) to the ``vtrust-flash`` SSID using ``flashmeifyoucan`` as the password. This is the network
+   being broadcast by the Pi from the tuya flash script.
+#. If you haven't already connect your smart plug and turn it on. It should automatically enter pairing mode, if it doesn't follow the instructions below:
+
+   * Brilliant `(PDF Manual) <https://www.brilliantsmart.com.au/wp-content/uploads/2019/02/03.-How-to-setup-the-Smart-plug.pdf>`__
+
+    * To connect the Smart WiFi Plug to your WiFi press and hold the manual control button for about 5 seconds until you hear a click. Let go of the button
+      as soon as you hear the **click**. Then press button once again to activate blinking. **The red indicator light should now blink rapidly (2 times per
+      second)**.
+
+   * Mirabella `(PDF Manual) <https://img1.wsimg.com/blobby/go/67cdd3b9-3600-4104-b097-603c05201237/downloads/1cq5h6nt7_336441.pdf>`__
+
+    * To do this, ensure your plug is on (the indicator light should be blue), hold the power button down for 5 seconds until you hear a click, let go of the
+      power button and then press the button once to activate.
+
+#. Press enter on your putty window to start the flash process and wait. If the connection is successful you should see a large amount of scrolling text, this
+   is the script backing up the factory shipped firmware.
+#. Once the process is complete you can type ``curl http://10.42.42.42/flashURL?url=http://10.42.42.1/files/firmware.bin``
+#. The plug will restart and if everything is working correctly after a few seconds you should be able to press the button triggering the relay and turning the
+   blue led on.
+
+3. Smart Plug Configurations
+----------------------------
+
+Thanks to the existing work by `@ideasman69 <https://github.com/ct-Open-Source/tuya-convert/issues/66>`__ and
+`afalzon <https://github.com/arendst/Sonoff-Tasmota/wiki/Mirabella-Genio-Smart-Plug>`__
+which these adaptions created by `@cryptelli <https://community.home-assistant.io/u/cryptelli>`__ are based on.
+
+
+3.1 Brilliant Smart Plug
+************************
+
+.. code-block:: yaml
+
+    esphome:
+      name: brilliant_smart_plug
+      platform: ESP8266
+      board: esp01_1m
+
+    wifi:
+      ssid: 'WIFI'
+      password: 'WIFIPASS'
+
+    logger:
+
+    api:
+
+    ota:
+
+    binary_sensor:
+      - platform: gpio
+        pin:
+          number: 14
+          mode: INPUT_PULLUP
+          inverted: true
+        name: "Power Button"
+        on_press:
+          - switch.toggle: relay
+
+      - platform: status
+        name: "Status"
+
+    switch:
+      - platform: gpio
+        id: red_led
+        pin:
+          number: GPIO12
+          inverted: true
+
+      - platform: gpio
+        name: "Brilliant Smart Plug"
+        pin: GPIO5
+        id: relay
+
+        # Turn off red LED to show blue when turned on
+        on_turn_on:
+          - switch.turn_off: red_led
+
+        # Turns on the red LED once the plug is turned off. Stock plug doesn't do this, to restore normal behavior remove the on_turn_on and on_turn_off
+        # blocks.
+        on_turn_off:
+          - switch.turn_on: red_led
+
+
+3.2 Mirabella Genio Wi-Fi 1 USB Adaptor
+***************************************
+
+.. code-block:: yaml
+
+    esphome:
+      name: mirabella_genio_smart_plug
+      platform: ESP8266
+      board: esp01_1m
+
+    wifi:
+      ssid: 'WIFI'
+      password: 'WIFIPASS'
+
+    logger:
+
+    api:
+
+    ota:
+
+    binary_sensor:
+      - platform: gpio
+        pin:
+          number: GPIO13
+          mode: INPUT_PULLUP
+          inverted: true
+        name: "Power Button"
+        on_press:
+          - switch.toggle: relay
+      - platform: status
+        name: Status
+
+    switch:
+      - platform: gpio
+        name: "Mirabella Genio Smart Plug"
+        pin: GPIO12
+        id: relay
+
+4. Adding to Home Assistant
+---------------------------
+
+You can now add your smart plug to home assistant via the configurations page, look for 'ESPHome' under the Integrations option and click 'Configure'.
+
+.. figure:: images/brilliant-mirabella-genio-smart-plugs-homeassistant.jpg
+    :align: center
+    :width: 50.0%
+
+See Also
+--------
+
+- :doc:`/components/switch/index`
+- :doc:`/components/binary_sensor/index`
+- :doc:`/components/light/index`
+- :doc:`/components/light/monochromatic`
+- :doc:`/components/output/index`
+- :doc:`/components/output/esp8266_pwm`
+- :doc:`/guides/automations`
+- :ghedit:`Edit`
+
+.. disqus::

index.rst

@@ -292,6 +292,7 @@ Cookbook
     Time & Temperature on OLED Display, cookbook/display_time_temp_oled, display_time_temp_oled_2.jpg
     Mirabella Genio Bulb, cookbook/mirabella-genio-bulb, cookbook-mirabella-genio-b22-rgbw.jpg
     Garage Door, cookbook/garage-door, window-open.svg
+    Brilliant / Mirabella Genio Smart Plugs, cookbook/brilliant-mirabella-genio-smart-plugs, cookbook-brilliant-mirabella-genio-smart-plugs.jpg
 
 Do you have other awesome automations or cool setups? Please feel free to add them to the
 documentation for others to copy. See :doc:`Contributing </guides/contributing>`.