Upstream
/
esphome-docs
mirror of https://github.com/esphome/esphome-docs.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

fixed typo's and added coma

This commit is contained in:
bakeromso 2022-09-26 14:40:47 +02:00 committed by GitHub
parent e21626f056
commit 438199f7f5
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 3 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
components/sensor/rotary_encoder.rst
View File

@ -23,7 +23,7 @@ a better understanding of these sensors.
:align: center
:width: 75.0%
To use rotary encoders in ESPHome, first identify the two pins encoding th step value.
To use rotary encoders in ESPHome, first identify the two pins encoding the step value.
These are often called ``CLK`` and ``DT`` as in above image. Note if the values this sensor
outputs go in the wrong direction, you can just swap these two pins.
@ -57,7 +57,7 @@ Configuration variables:
The second pin for determining the step value. Must not be a pin from an external I/O expander.
- **name** (**Required**, string): The name of the rotary encoder sensor.
- **pin_reset** (*Optional*, :ref:`Pin Schema <config-pin_schema>`):
An optional pin that resets the step value. This is useful with rotary encoders that have have a
An optional pin that resets the step value. This is useful with rotary encoders that have a
third pin. Defaults to no reset pin.
- **resolution** (*Optional*, string): The resolution of the sensor, this controls how many
pulses are generated by one step:
@ -72,7 +72,7 @@ Configuration variables:
- **max_value** (*Optional*, int): The maximum value this rotary encoder will go to, turning
the knob further will not increase the number. Defaults to no maximum.
- **publish_initial_value** (*Optional*, boolean): Controls whether the value is published
upon start of ESPHome. By default the value is only published when it changes, causing an
upon start of ESPHome. By default, the value is only published when it changes, causing an
"unknown" value at first. If you set this option to true, the value is published once after
boot and when it changes. Defaults to ``false``.
- **restore_mode** (*Optional*): Control how the Rotary Encoder attempts to restore state on bootup.