Merge branch 'current' into next

changelog/2022.9.0.rst

@@ -0,0 +1,167 @@
+ESPHome 2022.9.0 - 21st September 2022
+======================================
+
+.. seo::
+    :description: Changelog for ESPHome 2022.9.0.
+    :image: /_static/changelog-2022.9.0.png
+    :author: Jesse Hills
+    :author_twitter: @jesserockz
+
+.. imgtable::
+    :columns: 4
+
+    DPS310, components/sensor/dps310, dps310.jpg
+    MCP9600, components/sensor/mcp9600, mcp9600.jpg
+    TM1621, components/display/tm1621, tm1621.jpg
+    MPL3115A2, components/sensor/mpl3115a2, mpl3115a2.jpg
+    uFire EC sensor, components/sensor/ufire_ec, ufire_ec.png
+    uFire ISE sensor, components/sensor/ufire_ise, ufire_ise.png
+    Factory Reset Switch, components/switch/factory_reset, restart-alert.svg
+    Factory Reset Button, components/button/factory_reset, restart-alert.svg
+    TM1638, components/display/tm1638, tm1638.jpg
+    BL0942, components/sensor/bl0942, bl0942.png
+
+
+ESPHome Editor
+--------------
+
+The editor used in ESPHome has been swapped out for Monaco thanks to :ghuser:`glmnet`. He has
+been working hard to make the experience of writing your YAML configurations easier and it now
+supports auto completion with popups to show you more information.
+
+Factory Reset
+-------------
+
+A new Factory Reset switch and button has been added this release, allowing resetting of information such
+as counters, restored values, and more importantly, the wifi credentials of a device that has been set up
+using the captive portal such as pre-flashed devices you would have purchased.
+
+
+Full list of changes
+--------------------
+
+New Components
+^^^^^^^^^^^^^^
+
+- Add dps310 sensor support :esphomepr:`3704` by :ghuser:`kbx81` (new-integration)
+- Support for MCP9600 Thermocouple Amplifier :esphomepr:`3700` by :ghuser:`MrEditor97` (new-integration)
+- Add support to tm1621 display :esphomepr:`3737` by :ghuser:`Philippe12` (new-integration)
+- u-fire EC sensor :esphomepr:`3774` by :ghuser:`pvizeli` (new-integration)
+- Add support for MPL3115A2 Pressure/Altitude and Temperature Sensor :esphomepr:`3371` by :ghuser:`kbickar` (new-integration)
+- Add support for BL0942 voltage, current, energy and power Sensor :esphomepr:`3777` by :ghuser:`dbuezas` (new-integration)
+- Add Factory Reset button and switch :esphomepr:`3724` by :ghuser:`anatoly-savchenkov` (new-integration)
+- Add support for TM1638 Led and Key component :esphomepr:`3340` by :ghuser:`skykingjwc` (new-integration)
+- Add uFire ISE sensor :esphomepr:`3789` by :ghuser:`pvizeli` (new-integration)
+
+Beta Changes
+^^^^^^^^^^^^
+
+- null initialize total sensor for pulse counter :esphomepr:`3803` by :ghuser:`RoboMagus`
+- Sim800l add calls, multiline sms and ussd :esphomepr:`3630` by :ghuser:`glmnet`
+- Unify 'nullptr' initalization of class members; :esphomepr:`3805` by :ghuser:`RoboMagus`
+- Initialize all child sensors to nullptr :esphomepr:`3808` by :ghuser:`jesserockz`
+- Remove floating point calculation from ac_dimmer ISR :esphomepr:`3770` by :ghuser:`Azimath`
+- split pronto codes if they are too long :esphomepr:`3812` by :ghuser:`ssieb`
+- [BME280] raise standby time :esphomepr:`3804` by :ghuser:`h3ndrik`
+- Make sprinkler reset_resume() method public :esphomepr:`3824` by :ghuser:`kbx81`
+- Bump dashboard to 20220919.1 :esphomepr:`3828` by :ghuser:`balloob`
+- Fix-esphome-validation-line-number :esphomepr:`3815` by :ghuser:`glmnet`
+- Bump dashboard to 20220920.0 :esphomepr:`3831` by :ghuser:`balloob`
+- Bump dashboard to 20220920.1 :esphomepr:`3834` by :ghuser:`glmnet`
+
+All changes
+^^^^^^^^^^^
+
+- support modifying the apds9960 settings :esphomepr:`3708` by :ghuser:`ssieb`
+- Add support for pvvx mithermometer display via ble client :esphomepr:`3333` by :ghuser:`puuu`
+- Improve OTA error messages adding return codes :esphomepr:`3698` by :ghuser:`IgnacioHR`
+- Send CR also for commands for sim800l :esphomepr:`3719` by :ghuser:`ssieb`
+- hydreon_rgxx: Support lens_bad, em_sat and temperature :esphomepr:`3642` by :ghuser:`functionpointer`
+- wifi: support 802.11k and 802.11v :esphomepr:`3600` by :ghuser:`stintel`
+- Add final validate for i2c with mix/max frequency :esphomepr:`3727` by :ghuser:`jesserockz`
+- Add dps310 sensor support :esphomepr:`3704` by :ghuser:`kbx81` (new-integration)
+- Let favicon be cached :esphomepr:`3729` by :ghuser:`slovdahl`
+- Add bitmap font support :esphomepr:`3573` by :ghuser:`justfalter`
+- add log messages for bad pronto codes :esphomepr:`3738` by :ghuser:`ssieb`
+- add color compare operator's :esphomepr:`3730` by :ghuser:`nielsnl68`
+- Support for MCP9600 Thermocouple Amplifier :esphomepr:`3700` by :ghuser:`MrEditor97` (new-integration)
+- Support high update rates and fix several bugs in the cse7766 component. :esphomepr:`3675` by :ghuser:`fhriley`
+- Add Prometheus metrics relabeling :esphomepr:`3734` by :ghuser:`jangrewe`
+- mcp23017: read output latch registers during setup :esphomepr:`3744` by :ghuser:`andyboeh`
+- Captive portal show nearby WiFi with no ssid configured :esphomepr:`3748` by :ghuser:`anatoly-savchenkov`
+- Remove unnecessary schema extension on template button :esphomepr:`3753` by :ghuser:`jesserockz`
+- Tidy up switch schemas :esphomepr:`3754` by :ghuser:`jesserockz`
+- Add IP101 support to Ethernet component :esphomepr:`3751` by :ghuser:`kbx81`
+- Add BedJet Fan child component :esphomepr:`3735` by :ghuser:`jhansche`
+- ibeacon support for the ble_rssi sensor :esphomepr:`3745` by :ghuser:`wjtje`
+- Add AEHA IR Protocol :esphomepr:`3726` by :ghuser:`hazi`
+- Add sum type to binary_sensor_map :esphomepr:`3541` by :ghuser:`fbrthld`
+- Bump aioesphomeapi from 10.11.0 to 10.13.0 :esphomepr:`3740` by :ghuser:`dependabot[bot]`
+- Bump pylint from 2.14.5 to 2.15.0 :esphomepr:`3746` by :ghuser:`dependabot[bot]`
+- Esp32 pulsecounter optional pcnt :esphomepr:`3691` by :ghuser:`RoboMagus`
+- Bump black from 22.6.0 to 22.8.0 :esphomepr:`3760` by :ghuser:`dependabot[bot]`
+- Various ili9341 fixes :esphomepr:`3756` by :ghuser:`nielsnl68`
+- Add the same docker tags as used in HA :esphomepr:`3752` by :ghuser:`andrey-yantsen`
+- Bump pytest from 7.1.1 to 7.1.3 :esphomepr:`3766` by :ghuser:`dependabot[bot]`
+- Remove unneeded line (spi component adds it) :esphomepr:`3778` by :ghuser:`jesserockz`
+- Move crc16 to helpers :esphomepr:`3780` by :ghuser:`jesserockz`
+- YAML linting :esphomepr:`3779` by :ghuser:`jesserockz`
+- Add support to tm1621 display :esphomepr:`3737` by :ghuser:`Philippe12` (new-integration)
+- u-fire EC sensor :esphomepr:`3774` by :ghuser:`pvizeli` (new-integration)
+- Add support for MPL3115A2 Pressure/Altitude and Temperature Sensor :esphomepr:`3371` by :ghuser:`kbickar` (new-integration)
+- Add support for BL0942 voltage, current, energy and power Sensor :esphomepr:`3777` by :ghuser:`dbuezas` (new-integration)
+- Bump pylint from 2.15.0 to 2.15.2 :esphomepr:`3785` by :ghuser:`dependabot[bot]`
+- Add Factory Reset button and switch :esphomepr:`3724` by :ghuser:`anatoly-savchenkov` (new-integration)
+- [MPU6050] Support devices with WHOAMI 0x98 :esphomepr:`3784` by :ghuser:`CarlosGS`
+- Bump zeroconf from 0.39.0 to 0.39.1 :esphomepr:`3782` by :ghuser:`dependabot[bot]`
+- Add support for TM1638 Led and Key component :esphomepr:`3340` by :ghuser:`skykingjwc` (new-integration)
+- Remove status_set_error from ufire_ec :esphomepr:`3792` by :ghuser:`pvizeli`
+- Bump frenck/action-yamllint from 1.2.0 to 1.3.0 :esphomepr:`3798` by :ghuser:`dependabot[bot]`
+- esp32_ble_tracker continuous and one shot scanning modes :esphomepr:`3649` by :ghuser:`jonofmac`
+- Add stop action for ble scanning :esphomepr:`3799` by :ghuser:`jesserockz`
+- Add Prometheus Service Discovery for online devices :esphomepr:`3788` by :ghuser:`cznewt`
+- Allow ble tracker to subscribe to ota start and stop the scanning :esphomepr:`3800` by :ghuser:`jesserockz`
+- Add uFire ISE sensor :esphomepr:`3789` by :ghuser:`pvizeli` (new-integration)
+- fix spi timing issues :esphomepr:`3763` by :ghuser:`IgnacioHR`
+- null initialize total sensor for pulse counter :esphomepr:`3803` by :ghuser:`RoboMagus`
+- Sim800l add calls, multiline sms and ussd :esphomepr:`3630` by :ghuser:`glmnet`
+- Unify 'nullptr' initalization of class members; :esphomepr:`3805` by :ghuser:`RoboMagus`
+- Initialize all child sensors to nullptr :esphomepr:`3808` by :ghuser:`jesserockz`
+- Remove floating point calculation from ac_dimmer ISR :esphomepr:`3770` by :ghuser:`Azimath`
+- split pronto codes if they are too long :esphomepr:`3812` by :ghuser:`ssieb`
+- [BME280] raise standby time :esphomepr:`3804` by :ghuser:`h3ndrik`
+- Make sprinkler reset_resume() method public :esphomepr:`3824` by :ghuser:`kbx81`
+- Bump dashboard to 20220919.1 :esphomepr:`3828` by :ghuser:`balloob`
+- Fix-esphome-validation-line-number :esphomepr:`3815` by :ghuser:`glmnet`
+- Bump dashboard to 20220920.0 :esphomepr:`3831` by :ghuser:`balloob`
+- Bump dashboard to 20220920.1 :esphomepr:`3834` by :ghuser:`glmnet`
+
+Past Changelogs
+---------------
+
+- :doc:`2022.8.0`
+- :doc:`2022.6.0`
+- :doc:`2022.5.0`
+- :doc:`2022.4.0`
+- :doc:`2022.3.0`
+- :doc:`2022.2.0`
+- :doc:`2022.1.0`
+- :doc:`2021.12.0`
+- :doc:`2021.11.0`
+- :doc:`2021.10.0`
+- :doc:`2021.9.0`
+- :doc:`2021.8.0`
+- :doc:`v1.20.0`
+- :doc:`v1.19.0`
+- :doc:`v1.18.0`
+- :doc:`v1.17.0`
+- :doc:`v1.16.0`
+- :doc:`v1.15.0`
+- :doc:`v1.14.0`
+- :doc:`v1.13.0`
+- :doc:`v1.12.0`
+- :doc:`v1.11.0`
+- :doc:`v1.10.0`
+- :doc:`v1.9.0`
+- :doc:`v1.8.0`
+- :doc:`v1.7.0`

changelog/index.rst

@@ -2,7 +2,7 @@ Changelog
 =========
 
 .. redirect::
-    :url: /changelog/2022.8.0.html
+    :url: /changelog/2022.9.0.html
 
 .. toctree::
     :glob:

components/bluetooth_proxy.rst

@@ -18,6 +18,18 @@ The Bluetooth proxy depends on :doc:`esp32_ble_tracker` so make sure to add that
 
     Bluetooth proxy requires Home Assistant 2022.9 or later.
 
+.. note::
+
+    The Bluetooth proxy of ESPHome currently only provides Home Assistant with passive sensor
+    data that is advertised by certain devices. Not all devices are supported and ESPHome does not decode or keep a list.
+    To find out if your device is supported, please search for it in the `Home Assistant Integrations <https://www.home-assistant.io/integrations/>`__ list.
+
+    The Individual device integrations in Home Assistant (such as BTHome) will receive the data from the Bluetooth Integration in Home Assistant
+    which automatically aggregates all ESPHome bluetooth proxies with any USB Bluetooth Adapters you might have.
+
+Configuration:
+--------------
+
 .. code-block::
 
     bluetooth_proxy:

components/ota.rst

@@ -177,6 +177,9 @@ enum. These values are:
 Updating the password:
 ----------------------
 
+Changing an existing password:
+******************************
+
 Since the password is used both for compiling and uploading the regular ``esphome <file> run``
 won't work of course. This issue can be worked around by executing the operations separately
 through an ``on_boot`` trigger:
@@ -191,6 +194,12 @@ through an ``on_boot`` trigger:
       password: "Old password"
       id: my_ota
 
+Adding a password:
+******************
+
+If OTA is already enabled without a password, simply add a ``password:`` line to the existing
+``ota:`` config block.
+
 See Also
 --------
 

components/sensor/xiaomi_miscale.rst

@@ -91,7 +91,7 @@ You have to replace the numbers in the lambdas to determine your weight which is
       - platform: template
         name: Impedance Aurélien
         id: impedance_user1
-        unit_of_measurement: 'ohm'
+        unit_of_measurement: 'Ω'
         icon: mdi:omega
         accuracy_decimals: 0
       - platform: template
@@ -103,7 +103,7 @@ You have to replace the numbers in the lambdas to determine your weight which is
       - platform: template
         name: Impedance Siham
         id: impedance_user2
-        unit_of_measurement: 'ohm'
+        unit_of_measurement: 'Ω'
         icon: mdi:omega
         accuracy_decimals: 0
 

guides/automations.rst

@@ -730,6 +730,12 @@ script was already running.
       then:
         - script.execute: my_script
 
+or as lambda
+
+.. code-block:: yaml
+
+    lambda: 'id(my_script).execute();
+
 .. _script-stop_action:
 
 ``script.stop`` Action
@@ -757,6 +763,12 @@ will not be executed.
       then:
         - script.stop: my_script
 
+or as lambda
+
+.. code-block:: yaml   
+
+    lambda: 'id(my_script).stop();'
+
 .. _script-wait_action:
 
 ``script.wait`` Action
@@ -783,6 +795,14 @@ of the script are running in parallel, this will block until all of them have te
         - script.execute: my_script
         - script.wait: my_script
 
+or as lambda
+
+.. code-block:: yaml
+
+    lambda: |-
+        id(my_script).execute();
+        id(my_script).wait();
+
 .. _script-is_running_condition:
 
 ``script.is_running`` Condition
@@ -801,6 +821,15 @@ of the given id is running, not how many.
         then:
           - logger.log: Script is running!
 
+or as lambda
+
+.. code-block:: yaml
+
+    lambda: -|
+        if(id(my_script).is_running() {
+            ESP_LOGI("main", "Script is running!");
+        }
+
 .. _for_condition:
 
 ``for`` Condition

guides/supporters.rst

@@ -118,6 +118,7 @@ Contributors
 - `Bill Church (@billchurch) <https://github.com/billchurch>`__
 - `Brian Kaufman (@bkaufx) <https://github.com/bkaufx>`__
 - `JDavid (@blackhack) <https://github.com/blackhack>`__
+- `blakadder (@blakadder) <https://github.com/blakadder>`__
 - `Branimir Lambov (@blambov) <https://github.com/blambov>`__
 - `Jim Ekman (@blejdfist) <https://github.com/blejdfist>`__
 - `Scott Smith (@blurfl) <https://github.com/blurfl>`__
@@ -182,6 +183,7 @@ Contributors
 - `cwitting (@cwitting) <https://github.com/cwitting>`__
 - `Alex Solomaha (@CyanoFresh) <https://github.com/CyanoFresh>`__
 - `Luar Roji (@cyberplant) <https://github.com/cyberplant>`__
+- `Aleš Komárek (@cznewt) <https://github.com/cznewt>`__
 - `d-two (@d-two) <https://github.com/d-two>`__
 - `dab0g (@dab0g) <https://github.com/dab0g>`__
 - `Dale Higgs (@dale3h) <https://github.com/dale3h>`__
@@ -350,6 +352,7 @@ Contributors
 - `guillempages (@guillempages) <https://github.com/guillempages>`__
 - `Guyohms (@Guyohms) <https://github.com/Guyohms>`__
 - `Gilles van den Hoven (@gvdhoven) <https://github.com/gvdhoven>`__
+- `h3ndrik (@h3ndrik) <https://github.com/h3ndrik>`__
 - `haade (@haade-administrator) <https://github.com/haade-administrator>`__
 - `Peter van Dijk (@Habbie) <https://github.com/Habbie>`__
 - `Hagai Shatz (@hagai-shatz) <https://github.com/hagai-shatz>`__
@@ -442,6 +445,7 @@ Contributors
 - `Jonathan Adams (@jonathanadams) <https://github.com/jonathanadams>`__
 - `Jonathan Treffler (@JonathanTreffler) <https://github.com/JonathanTreffler>`__
 - `JonnyaiR (@jonnyair) <https://github.com/jonnyair>`__
+- `Jonathan V (@jonofmac) <https://github.com/jonofmac>`__
 - `Joppy (@JoppyFurr) <https://github.com/JoppyFurr>`__
 - `joseph douce (@josephdouce) <https://github.com/josephdouce>`__
 - `Joshua Spence (@joshuaspence) <https://github.com/joshuaspence>`__
@@ -495,7 +499,6 @@ Contributors
 - `Kyle Hendricks (@kylehendricks) <https://github.com/kylehendricks>`__
 - `Kyle Manna (@kylemanna) <https://github.com/kylemanna>`__
 - `Kalashnikov Ilya (@l1bbcsg) <https://github.com/l1bbcsg>`__
-- `la7dja (@la7dja) <https://github.com/la7dja>`__
 - `Limor "Ladyada" Fried (@ladyada) <https://github.com/ladyada>`__
 - `Luca Adrian L (@lal12) <https://github.com/lal12>`__
 - `Fredrik Lindqvist (@Landrash) <https://github.com/Landrash>`__
@@ -510,7 +513,6 @@ Contributors
 - `Lubos Horacek (@lhoracek) <https://github.com/lhoracek>`__
 - `Juraj Liso (@LiJu09) <https://github.com/LiJu09>`__
 - `lingex (@lingex) <https://github.com/lingex>`__
-- `lkomurcu (@lkomurcu) <https://github.com/lkomurcu>`__
 - `Lazar Obradovic (@lobradov) <https://github.com/lobradov>`__
 - `Barry Loong (@loongyh) <https://github.com/loongyh>`__
 - `LuBeDa (@lubeda) <https://github.com/lubeda>`__
@@ -545,7 +547,6 @@ Contributors
 - `Mario (@mario-tux) <https://github.com/mario-tux>`__
 - `Marek Marczykowski-Górecki (@marmarek) <https://github.com/marmarek>`__
 - `Matthew Harrold (@marrold) <https://github.com/marrold>`__
-- `marshn (@marshn) <https://github.com/marshn>`__
 - `marsjan155 (@marsjan155) <https://github.com/marsjan155>`__
 - `Martin (@martgras) <https://github.com/martgras>`__
 - `Martin Hjelmare (@MartinHjelmare) <https://github.com/MartinHjelmare>`__
@@ -562,7 +563,6 @@ Contributors
 - `Maurice Schleußinger (@maurice-schleussinger) <https://github.com/maurice-schleussinger>`__
 - `Maximilian Gerhardt (@maxgerhardt) <https://github.com/maxgerhardt>`__
 - `mbo18 (@mbo18) <https://github.com/mbo18>`__
-- `mckaymatthew (@mckaymatthew) <https://github.com/mckaymatthew>`__
 - `Me No Dev (@me-no-dev) <https://github.com/me-no-dev>`__
 - `Alexandr Zarubkin (@me21) <https://github.com/me21>`__
 - `Joseph Mearman (@Mearman) <https://github.com/Mearman>`__
@@ -576,15 +576,14 @@ Contributors
 - `Marco Lusini (@met67) <https://github.com/met67>`__
 - `Martin Flasskamp (@MFlasskamp) <https://github.com/MFlasskamp>`__
 - `Michael Gorven (@mgorven) <https://github.com/mgorven>`__
-- `mhentschke (@mhentschke) <https://github.com/mhentschke>`__
 - `Michaël Arnauts (@michaelarnauts) <https://github.com/michaelarnauts>`__
 - `Micha Nordmann (@Michanord) <https://github.com/Michanord>`__
-- `micronen (@micronen) <https://github.com/micronen>`__
 - `Pauline Middelink (@middelink) <https://github.com/middelink>`__
 - `Mikko Tervala (@MikkoTervala) <https://github.com/MikkoTervala>`__
 - `MiKuBB (@MiKuBB) <https://github.com/MiKuBB>`__
 - `Minideezel (@minideezel) <https://github.com/minideezel>`__
 - `André Klitzing (@misery) <https://github.com/misery>`__
+- `Tomasz (@Misiu) <https://github.com/Misiu>`__
 - `Matthew Edwards (@mje-nz) <https://github.com/mje-nz>`__
 - `Matthew Garrett (@mjg59) <https://github.com/mjg59>`__
 - `Maarten (@mjkl-gh) <https://github.com/mjkl-gh>`__
@@ -676,6 +675,7 @@ Contributors
 - `Peter Foreman (@peterforeman) <https://github.com/peterforeman>`__
 - `Peter Galantha (@peterg79) <https://github.com/peterg79>`__
 - `Peter Remøy Paulsen (@petrepa) <https://github.com/petrepa>`__
+- `Philippe FOUQUET (@Philippe12) <https://github.com/Philippe12>`__
 - `Philip Rosenberg-Watt (@PhilRW) <https://github.com/PhilRW>`__
 - `pieterbrink123 (@pieterbrink123) <https://github.com/pieterbrink123>`__
 - `Tommy van der Vorst (@pixelspark) <https://github.com/pixelspark>`__
@@ -693,6 +693,7 @@ Contributors
 - `Patrick Toal (@ptoal) <https://github.com/ptoal>`__
 - `Leandro Puerari (@puerari) <https://github.com/puerari>`__
 - `puuu (@puuu) <https://github.com/puuu>`__
+- `Pascal Vizeli (@pvizeli) <https://github.com/pvizeli>`__
 - `[pʲɵs] (@pyos) <https://github.com/pyos>`__
 - `Qc (@qc24) <https://github.com/qc24>`__
 - `Karol Zlot (@qqgg231) <https://github.com/qqgg231>`__
@@ -761,6 +762,7 @@ Contributors
 - `Niklas Wagner (@Skaronator) <https://github.com/Skaronator>`__
 - `Rafael Treviño (@skasi7) <https://github.com/skasi7>`__
 - `Brian Slesinsky (@skybrian) <https://github.com/skybrian>`__
+- `Jordan W. Cobb (@skykingjwc) <https://github.com/skykingjwc>`__
 - `Sebastian Lövdahl (@slovdahl) <https://github.com/slovdahl>`__
 - `smischny (@smischny) <https://github.com/smischny>`__
 - `Luca Zimmermann (@soundstorm) <https://github.com/soundstorm>`__
@@ -891,9 +893,10 @@ Contributors
 - `Zebble (@Zebble) <https://github.com/Zebble>`__
 - `ZJY (@zhangjingye03) <https://github.com/zhangjingye03>`__
 - `San (@zhujunsan) <https://github.com/zhujunsan>`__
+- `Geek_cat (@zhzhzhy) <https://github.com/zhzhzhy>`__
 - `I. Tomita (@ziceva) <https://github.com/ziceva>`__
 - `Michael Labuschke (@zigman79) <https://github.com/zigman79>`__
 - `Zack Barett (@zsarnett) <https://github.com/zsarnett>`__
 - `Christian Zufferey (@zuzu59) <https://github.com/zuzu59>`__
 
-*This page was last updated September 6, 2022.*
+*This page was last updated September 21, 2022.*