Merge pull request #2730 from esphome/bump-2023.3.0b2

2023.3.0b2

Doxygen

@@ -38,7 +38,7 @@ PROJECT_NAME           = "ESPHome"
 # could be handy for archiving the generated documentation or if some version
 # control system is used.
 
-PROJECT_NUMBER         = 2023.3.0b1
+PROJECT_NUMBER         = 2023.3.0b2
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer a

Makefile

@@ -1,5 +1,5 @@
 ESPHOME_PATH = ../esphome
-ESPHOME_REF = 2023.3.0b1
+ESPHOME_REF = 2023.3.0b2
 
 .PHONY: html html-strict cleanhtml deploy help live-html Makefile netlify netlify-api api netlify-dependencies svg2png copy-svg2png minify
 

_redirects

@@ -8,3 +8,4 @@
 /devices/esp32.html /components/esp32.html
 
 /changelog/2022.12.4.html /changelog/2022.12.0.html 301
+/components/display/ili9341.html /components/display/ili9xxx.html 301

_static/version

@@ -1 +1 @@
-2023.3.0b1
+2023.3.0b2

changelog/2023.3.0.rst

@@ -61,6 +61,16 @@ Breaking Changes
 - Sprinkler "v2" updates :esphomepr:`4159` by :ghuser:`kbx81` (breaking-change)
 - sn74hc165 fixes :esphomepr:`4457` by :ghuser:`jesserockz` (breaking-change)
 
+Beta Changes
+^^^^^^^^^^^^
+
+- Fix ethernet clk_mode for GPIO0_OUT :esphomepr:`4307` by :ghuser:`jorticus`
+- Add ESP32-S3 support in NeoPixelBus component :esphomepr:`4114` by :ghuser:`rcloran`
+- Renaming and extending the ili9341 to the ili9xxx component :esphomepr:`4275` by :ghuser:`nielsnl68` (new-integration) (breaking-change)
+- Drop unused, broken logging macros :esphomepr:`4534` by :ghuser:`oxan`
+- Revert storing Font glyphs in manually-allocated memory :esphomepr:`4516` by :ghuser:`oxan`
+- Correct BME680 gas calculation and heater_off :esphomepr:`4498` by :ghuser:`CarlosGS`
+
 All changes
 ^^^^^^^^^^^
 

components/display/ili9xxx.rst

@@ -1,21 +1,25 @@
-ILI9341 TFT LCD
-===============
+
+ILI9xxx TFT LCD Series
+======================
 
 .. seo::
-    :description: Instructions for setting up ILI9341 TFT LCD display drivers.
+    :description: Instructions for setting up ILI9xxx TFT LCD display drivers.
     :image: ili9341.jpg
 
-.. _ili9341:
+.. _ili9xxx:
 
 Usage
 -----
+This component is the successor of the ILI9341 component allowing to control more display drivers and use 16bit colors when enough free ram.
 
-The ``ili9341`` display platform allows you to use
+The ``ILI9xxx`` display platform allows you to use
 ILI9341 (`datasheet <https://cdn-shop.adafruit.com/datasheets/ILI9341.pdf>`__,
-`Aliexpress <https://www.aliexpress.com/af/Ili9341.html>`__)
-displays with ESPHome. As this is a somewhat higher resolution display and may require pins
+`Aliexpress <https://www.aliexpress.com/af/Ili9341.html>`__) and other
+displays from the same chip family with ESPHome. As this is a somewhat higher resolution display and may require pins
 beyond the typical SPI connections, it is better suited for use with the ESP32.
 
+**Note:** To use 16bit instead of 8bit colors use a esp32 with enough PSRAM the display.
+
 .. figure:: images/ili9341-full.jpg
     :align: center
     :width: 75.0%
@@ -27,15 +31,13 @@ beyond the typical SPI connections, it is better suited for use with the ESP32.
 
     # Example minimal configuration entry
     display:
-      - platform: ili9341
-        model: TFT 2.4
+      - platform: ili9xxx
+        model: ili9341
         cs_pin: 14
         dc_pin: 27
-        led_pin: 32  ### see note below ###
         reset_pin: 33
-
         lambda: |-
-          it.fill(Color::BLACK);
+          it.fill(COLOR_BLACK);
           it.print(0, 0, id(my_font), id(my_red), TextAlign::TOP_LEFT, "Hello World!");
 
 Configuration variables:
@@ -43,15 +45,12 @@ Configuration variables:
 
 - **model** (**Required**): The model of the display. Options are:
 
-  - ``M5STACK``
-  - ``TFT 2.4``
-  - ``TFT 2.4R``  (ILI9342)
+  - ``M5STACK``, ``TFT 2.4``, ``TFT 2.4R`` 
+  - ``ILI9341``, ``ILI9342``, ``ILI9481``, ``ILI9486``, ``ILI9488``, ``ST7796``
 
 - **cs_pin** (*Optional*, :ref:`Pin Schema <config-pin_schema>`): The CS pin.
 - **dc_pin** (**Required**, :ref:`Pin Schema <config-pin_schema>`): The DC pin.
 - **reset_pin** (*Optional*, :ref:`Pin Schema <config-pin_schema>`): The RESET pin.
-- **led_pin** (*Optional*, :ref:`Pin Schema <config-pin_schema>`): The display's backlight pin. **Note:** Connect to a
-  PWM-capable pin to switch/dim the display's backlight **or** save a pin by connecting it through a 3.3K resistor to the +3V supply.
 - **rotation** (*Optional*): Set the rotation of the display. Everything drawn in the ``lambda:`` will be rotated
   per this option. One of ``0°`` (default), ``90°``, ``180°``, or ``270°``.
 - **lambda** (*Optional*, :ref:`lambda <config-lambda>`): The lambda to use for rendering the content on the display.
@@ -124,7 +123,7 @@ To configure a dimmable backlight:
     light:
       - platform: monochromatic
         output: gpio_32_backlight_pwm
-        name: "ILI9341 Display Backlight"
+        name: "Display Backlight"
         id: back_light
         restore_mode: ALWAYS_ON
 
@@ -139,11 +138,10 @@ To configure an image adaptive color pallet to show greater than 8 bit color dep
         type: RGB24
 
     display:
-      - platform: ili9341
-        model: TFT 2.4
+      - platform: ili9xxx
+        model: ili9341
         cs_pin: 5
         dc_pin: 4
-        led_pin: 15
         reset_pin: 22
         rotation: 90
         id: tft_ha
@@ -158,5 +156,5 @@ See Also
 --------
 
 - :doc:`index`
-- :apiref:`ili9341/ili9341_display.h`
+- :apiref:`ili9xxx/ili9xxx_display.h`
 - :ghedit:`Edit`

components/light/neopixelbus.rst

@@ -127,7 +127,8 @@ settings vary by method:
   - **async** (*Optional*, boolean): Use an asynchronous transfer. Defaults to ``false``. If enabled,
     the logger must be disabled even if bus 1 is used.
 
-- **esp32_i2s**: The recommended method for ESP32. Available on all output pins. Additional options:
+- **esp32_i2s**: The recommended method for ESP32, but not available on the ESP32-S3 or ESP32-C3.
+  Available on all output pins. Additional options:
 
   - **bus** (*Optional*): The I2S bus to use. The ESP32 has bus 0 or 1 available, but the ESP32-S2 only bus 0.
     One of ``0``, ``1``, ``dynamic``.
@@ -135,7 +136,7 @@ settings vary by method:
 - **esp32_rmt**: An alternative method for ESP32 that uses the RMT peripheral to send data.
   Available on all output pins. Additional options:
 
-  - **channel** (*Optional*): The RMT channel to use. The ESP32 has channels 0-7, ESP32-S2 0-3 and ESP32-C3 0-1.
+  - **channel** (*Optional*): The RMT channel to use. The ESP32 has channels 0-7, ESP32-S2 0-3, ESP32-S3 0-3, and ESP32-C3 0-1.
     Defaults to 6 on ESP32, and 1 on other ESP32 variants.
 
 The following method is available only for two-wire chips (specify ``data_pin`` and ``clock_pin``):

components/logger.rst

@@ -1,3 +1,5 @@
+.. _logger:
+
 Logger Component
 ================
 

components/sensor/kuntze.rst

@@ -11,7 +11,7 @@ instrument in ESPHome. It uses :ref:`UART <uart>` (ModBUS) for communication.
 Once configured you can use sensors as described below for your projects.
 
 
-.. figure:: ../images/kuntze.jpg
+.. figure:: ../../images/kuntze.jpg
     :align: center
 
     Kuntze Neon® Multi instrument
@@ -30,14 +30,14 @@ The device communicates at ``19200`` baud ``8E1``. To connect to ESPHome, an RS4
 transceiver is needed. Choose a type which does not need a trigger to send and 
 receive data,  for example:
 
-.. figure:: ../images/rs485.jpg
+.. figure:: ../../images/rs485.jpg
 
 The controller connects to the UART of the MCU. For ESP32 GPIO `16` to `TXD` and `17` 
 to RXD are the default ones but any other pins can be used as well. 3.3V to VCC and GND to GND.
 
 .. warning::
 
-    If you are using the :doc:`logger` make sure you are not using the same pins for it or otherwise disable the UART 
+    If you are using the :ref:`logger` make sure you are not using the same pins for it or otherwise disable the UART 
     logging with the ``baud_rate: 0`` option.
 
 Component
@@ -52,7 +52,7 @@ A configured modbus component is optional. It will be automatically created.
       - id: uart_bus
         tx_pin: GPIO16
         rx_pin: GPIO17
-        baud_rate: 19600
+        baud_rate: 19200
         parity: EVEN
 
     sensor:
@@ -81,7 +81,7 @@ See Also
 --------
 
 - :ref:`uart`
-- :doc:`logger`
+- :ref:`logger`
 - :ref:`Sensor <config-sensor>`
 - `Kuntze manuals <https://www.kuntze.com/en/downloads-2/>`__
 - `Communication protocol <https://www.kuntze.com/wp-content/uploads/2021/05/2019_Manual_Modbus-RTU_ENG.pdf>`__

conf.py

@@ -69,7 +69,7 @@ author = "ESPHome"
 # The short X.Y version.
 version = "2023.3"
 # The full version, including alpha/beta/rc tags.
-release = "2023.3.0b1"
+release = "2023.3.0b2"
 
 # The language for content autogenerated by Sphinx. Refer to documentation
 # for a list of supported languages.

guides/supporters.rst

@@ -360,7 +360,6 @@ Contributors
 - `Antoine GRÉA (@grea09) <https://github.com/grea09>`__
 - `Gil Peeters (@grillp) <https://github.com/grillp>`__
 - `George (@grob6000) <https://github.com/grob6000>`__
-- `Stefan Grufman (@GruffyPuffy) <https://github.com/GruffyPuffy>`__
 - `gsexton (@gsexton) <https://github.com/gsexton>`__
 - `Gabriel Sieben (@gsieben) <https://github.com/gsieben>`__
 - `Jadson Santos (@gtjadsonsantos) <https://github.com/gtjadsonsantos>`__
@@ -474,6 +473,7 @@ Contributors
 - `JonnyaiR (@jonnyair) <https://github.com/jonnyair>`__
 - `Jonathan V (@jonofmac) <https://github.com/jonofmac>`__
 - `Joppy (@JoppyFurr) <https://github.com/JoppyFurr>`__
+- `Jared Sanson (@jorticus) <https://github.com/jorticus>`__
 - `Joshua Spence (@joshuaspence) <https://github.com/joshuaspence>`__
 - `Joscha Wagner (@jowgn) <https://github.com/jowgn>`__
 - `Javier Peletier (@jpeletier) <https://github.com/jpeletier>`__
@@ -729,6 +729,7 @@ Contributors
 - `randomllama (@randomllama) <https://github.com/randomllama>`__
 - `rbaron (@rbaron) <https://github.com/rbaron>`__
 - `Robert Cambridge (@rcambrj) <https://github.com/rcambrj>`__
+- `Russell Cloran (@rcloran) <https://github.com/rcloran>`__
 - `Rebbe Pod (@RebbePod) <https://github.com/RebbePod>`__
 - `Alex (@redwngsrul) <https://github.com/redwngsrul>`__
 - `Regev Brody (@regevbr) <https://github.com/regevbr>`__

index.rst

@@ -365,6 +365,7 @@ Miscellaneous
     uFire ISE sensor, components/sensor/ufire_ise, ufire_ise.png, pH & Temperature
     Resol VBus, components/vbus, resol_deltasol_bs_plus.jpg
     Person Sensor (SEN21231), components/sensor/sen21231, sen21231.png
+    Kuntze pool sensor, components/sensor/kuntze, kuntze.jpg
 
 
 Motion
@@ -564,7 +565,7 @@ Display Components
     ST7735, components/display/st7735, st7735.jpg
     ST7789V, components/display/st7789v, st7789v.jpg
     ST7920, components/display/st7920, st7920.jpg
-    ILI9341, components/display/ili9341, ili9341.jpg
+    ILI9xxx, components/display/ili9xxx, ili9341.jpg
     Waveshare E-Paper, components/display/waveshare_epaper, waveshare_epaper.jpg
     Inkplate, components/display/inkplate6, inkplate6.jpg
     PCD8544 (Nokia 5110/ 3310), components/display/pcd8544, pcd8544.jpg