Upstream/esphome-docs
1
0
Fork 0
mirror of https://github.com/esphome/esphome-docs.git synced 2024-12-25 17:17:54 +01:00
Code Issues Projects Releases Wiki Activity

Tuya climate component: Add documentation for eco mode (#1216)

Browse Source 
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
This commit is contained in:
Stefan Rado 2021-09-19 23:17:46 +02:00 committed by GitHub
parent 3438b7f47e
commit 77e920cb71
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 5 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
components/climate/tuya.rst
View File

@ -27,7 +27,7 @@ On this controller, the data points are:
- 3 represents the target temperature.
- 4 represents the current temperature.
- 5 represents the timer but is not yet available to be used in ESPHome.
- 7 represents the eco mode switch. (use the :doc:`/components/switch/tuya` component to control this)
- 7 represents the eco mode switch.
Based on this, you can create the climate device as follows:
@ -39,6 +39,8 @@ Based on this, you can create the climate device as follows:
switch_datapoint: 1
target_temperature_datapoint: 3
current_temperature_datapoint: 4
eco_datapoint: 7
eco_temperature: 20 °C
Configuration variables:
------------------------
@ -56,6 +58,8 @@ Configuration variables:
- **target_temperature_datapoint** (**Required**, int): The datapoint id number of the target temperature.
- **current_temperature_datapoint** (**Required**, int): The datapoint id number of the current temperature.
- **temperature_multiplier** (*Optional*, float): A multiplier to modify the incoming and outgoing temperature values - :ref:`see below <temperature-multiplier>`.
- **eco_datapoint** (*Optional*, int): The datapoint id number of the eco mode state.
- **eco_temperature** (*Optional*, float): The target temperature the controller uses while the eco mode is active.
If the device has different multipliers for current and target temperatures, **temperature_multiplier** can be replaced with both of: