From 81816f944c2cedf7c4132ccd07ba5f1ccda064cd Mon Sep 17 00:00:00 2001
From: 2016for <44195948+2016for@users.noreply.github.com>
Date: Tue, 5 Mar 2019 21:00:38 +0530
Subject: [PATCH] H801 Cookbook Edit Language about holding GPIOs during
 flashing (#189)

H801 Cookbook Edit Language about holding GPIOs during flashing
---
 cookbook/h801.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/cookbook/h801.rst b/cookbook/h801.rst
index d8e62e8ef..deddf0059 100644
--- a/cookbook/h801.rst
+++ b/cookbook/h801.rst
@@ -92,7 +92,7 @@ You will need to solder pins to the board inside the h801 (fortunately its prett
 not a lot of components or stuff in the way part from the 2 wires on the back)
 
 3.3v, GND, TX and RX (RX to RX and TX to TX) needs to be connected to your serial adapter, the
-two other pins must be shorted by a jumper or a breadboard cable when flashing.
+two other pins must be shorted throughout the flashing process by a jumper or a breadboard cable.
 (Remember to remove it after flashing)
 
 See Also