Merge branch 'next' of https://github.com/esphome/esphome-docs into next

components/cover/template.rst

@@ -58,6 +58,9 @@ Configuration variables:
 - **assumed_state** (*Optional*, boolean): Whether the true state of the cover is not known.
   This will make the Home Assistant frontend show buttons for both OPEN and CLOSE actions, instead
   of hiding one of them. Defaults to ``false``.
+- **has_position** (*Optional*, boolean): Whether this cover will publish its position as a floating point number.
+  By default (``false``), the cover only publishes OPEN/CLOSED position.
+  By setting this to true you can also send any position in between using the publish action.
 - **tilt_action** (*Optional*, :ref:`Action <config-action>`): The action that should
   be performed when the remote (like Home Assistant's frontend) requests the cover be set to a specific
   tilt position.

components/esphome.rst

@@ -97,18 +97,20 @@ option you can tell ESPHome which arduino framework to use for compiling.
 For the ESP8266, you currently can manually pin the arduino version to these values (see the full
 list of arduino frameworks `here <https://github.com/esp8266/Arduino/releases>`__):
 
-* `2.5.2 <https://github.com/esp8266/Arduino/releases/tag/2.5.2>`__
+* `2.5.2 <https://github.com/esp8266/Arduino/releases/tag/2.5.2>`__ (default)
 * `2.5.1 <https://github.com/esp8266/Arduino/releases/tag/2.5.1>`__
 * `2.5.0 <https://github.com/esp8266/Arduino/releases/tag/2.5.0>`__
-* `2.4.2 <https://github.com/esp8266/Arduino/releases/tag/2.4.2>`__ (default)
+* `2.4.2 <https://github.com/esp8266/Arduino/releases/tag/2.4.2>`__
 * `2.4.1 <https://github.com/esp8266/Arduino/releases/tag/2.4.1>`__
 * `2.4.0 <https://github.com/esp8266/Arduino/releases/tag/2.4.0>`__
 * `2.3.0 <https://github.com/esp8266/Arduino/releases/tag/2.3.0>`__ (used by Tasmota etc)
 
 For the ESP32, there are these arduino `framework versions <https://github.com/espressif/arduino-esp32/releases>`__:
 
+- `1.0.4 <https://github.com/espressif/arduino-esp32/releases/tag/1.0.4>`__ (default)
+- `1.0.3 <https://github.com/espressif/arduino-esp32/releases/tag/1.0.3>`__
 - `1.0.2 <https://github.com/espressif/arduino-esp32/releases/tag/1.0.2>`__
-- `1.0.1 <https://github.com/espressif/arduino-esp32/releases/tag/1.0.1>`__ (default)
+- `1.0.1 <https://github.com/espressif/arduino-esp32/releases/tag/1.0.1>`__
 - `1.0.0 <https://github.com/espressif/arduino-esp32/releases/tag/1.0.0>`__
 
 .. _esphome-esp8266_restore_from_flash:

components/http_request.rst

@@ -0,0 +1,184 @@
+HTTP Request
+============
+
+.. seo::
+    :description: Instructions for setting up HTTP Requests in ESPHome
+    :image: connection.png
+    :keywords: http, request
+
+
+The ``http_request`` component lets you make HTTP/HTTPS requests.
+
+.. note::
+
+    This component works only with :ref:`arduino framework <esphome-arduino_version>` 2.5.0 or newer.
+
+First, you need to setup a component:
+
+.. code-block:: yaml
+
+    # Example configuration entry
+    http_request:
+      useragent: esphome/device
+      timeout: 10s
+
+Configuration variables:
+------------------------
+
+- **useragent** (*Optional*, string): User-Agent header for requests. Defaults to ``ESPHome``.
+- **timeout** (*Optional*, :ref:`time <config-time>`): Timeout for request. Defaults to ``5s``.
+- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
+
+HTTP Request Actions
+--------------------
+
+Component support a number of :ref:`actions <config-action>` that can be used to send requests.
+
+.. _http_request-get_action:
+
+``http_request.get`` Action
+***************************
+
+This :ref:`action <config-action>` sends a GET request.
+
+.. code-block:: yaml
+
+    on_...:
+      - http_request.get:
+          url: https://esphome.io
+          headers:
+            Content-Type: application/json
+          verify_ssl: false
+      # Short form
+      - http_request.get: https://esphome.io
+
+Configuration variables:
+
+- **url** (**Required**, string, :ref:`templatable <config-templatable>`): URL to send request.
+- **headers** (*Optional*, mapping): Map of HTTP headers. Values are :ref:`templatable <config-templatable>`.
+- **verify_ssl** (*Optional*, boolean): Verify the SSL certificate of the endpoint. Defaults to ``true``.
+
+.. note::
+
+    Currently ESPHome **can't verify the SSL certificate** of the endpoint.
+    Set ``verify_ssl: false`` to make HTTPS request.
+
+.. _http_request-post_action:
+
+``http_request.post`` Action
+****************************
+
+This :ref:`action <config-action>` sends a POST request.
+
+.. code-block:: yaml
+
+    on_...:
+      - http_request.post:
+          url: https://esphome.io
+          headers:
+            Content-Type: application/json
+          json:
+            key: value
+          verify_ssl: false
+      # Short form
+      - http_request.post: https://esphome.io
+
+Configuration variables:
+
+- **body** (*Optional*, string, :ref:`templatable <config-templatable>`): A HTTP body string to send with request.
+- **json** (*Optional*, mapping): A HTTP body in JSON format. Values are :ref:`templatable <config-templatable>`. See :ref:`http_request-examples`.
+- All other options from :ref:`http_request-get_action`.
+
+.. _http_request-send_action:
+
+``http_request.send`` Action
+****************************
+
+This :ref:`action <config-action>` sends a request.
+
+.. code-block:: yaml
+
+    on_...:
+      - http_request.send:
+          method: PUT
+          url: https://esphome.io
+          headers:
+            Content-Type: application/json
+          body: "Some data"
+          verify_ssl: false
+
+Configuration variables:
+
+- **method** (**Required**, string): HTTP method to use (``GET``, ``POST``, ``PUT``, ``DELETE``, ``PATCH``).
+- All other options from :ref:`http_request-post_action`.
+
+.. _http_request-examples:
+
+Examples
+--------
+
+Templatable values
+******************
+
+.. code-block:: yaml
+
+    on_...:
+      - http_request.post:
+          url: !lambda |-
+            return ((std::string) "https://esphome.io?state=" + id(my_sensor).state).c_str();
+          headers:
+            X-Custom-Header: !lambda |-
+              return ((std::string) "Value-" + id(my_sensor).state).c_str();
+          body: !lambda |-
+            return id(my_sensor).state;
+
+
+Body in JSON format (syntax 1)
+******************************
+
+**Note:** all values of the map should be a strings.
+It's impossible to send ``boolean`` or ``numbers`` with this syntax.
+
+.. code-block:: yaml
+
+    on_...:
+      - http_request.post:
+          url: https://esphome.io
+          verify_ssl: false
+          json:
+            key: !lambda |-
+              return id(my_sensor).state;
+            greeting: "Hello World"
+
+        # Will send:
+        # {"key": "42.0", "greeting": "Hello World"}
+
+Body in JSON format (syntax 2)
+******************************
+
+**Note:** use this syntax to send ``boolean`` or ``numbers`` in JSON.
+
+The JSON message will be constructed using the `ArduinoJson <https://github.com/bblanchon/ArduinoJson>`__ library.
+In the ``json`` option you have access to a ``root`` object which will represents the base object
+of the JSON message. You can assign values to keys by using the ``root["KEY_NAME"] = VALUE;`` syntax
+as seen below.
+
+.. code-block:: yaml
+
+    on_...:
+      - http_request.post:
+          url: https://esphome.io
+          verify_ssl: false
+          json: |-
+            root["key"] = id(my_sensor).state;
+            root["greeting"] = "Hello World";
+
+        # Will send:
+        # {"key": 42.0, "greeting": "Hello World"}
+
+See Also
+--------
+
+- :doc:`index`
+- :apiref:`http_request/http_request.h`
+- :ghedit:`Edit`

components/sensor/ina226.rst

@@ -0,0 +1,69 @@
+INA226 DC current and power sensor
+==================================
+
+.. seo::
+    :description: Instructions for setting up INA226 DC current and power sensors
+    :image: ina226.jpg
+    :keywords: ina226
+
+The ``ina226`` sensor platform allows you to use your INA226 DC Current and Power Sensor
+(`datasheet <http://www.ti.com/lit/ds/symlink/ina226.pdf>`__,
+`eBay`_) sensors with
+ESPHome. The :ref:`I²C Bus <i2c>` is
+required to be set up in your configuration for this sensor to work.
+
+
+.. figure:: images/ina226-full.jpg
+    :align: center
+    :width: 50.0%
+
+    INA226 DC Current and Power Sensor.
+
+.. _eBay: https://www.ebay.com/sch/i.html?_nkw=INA226
+
+.. code-block:: yaml
+
+    # Example configuration entry
+    sensor:
+      - platform: ina226
+        address: 0x40
+        shunt_resistance: 0.1 ohm
+        current:
+          name: "INA226 Current"
+        power:
+          name: "INA226 Power"
+        bus_voltage:
+          name: "INA226 Bus Voltage"
+        shunt_voltage:
+          name: "INA226 Shunt Voltage"
+        max_current: 3.2A
+        update_interval: 60s
+
+Configuration variables:
+------------------------
+
+- **address** (*Optional*, int): Manually specify the i^2c address of the sensor. Defaults to ``0x40``.
+- **shunt_resistance** (*Optional*, float): The value of the shunt resistor on the board for current calculation.
+  Defaults to ``0.1 ohm``.
+- **max_current** (*Optional*, float): The maximum current you are expecting. ESPHome will use this to
+  configure the sensor optimally. Defaults to ``3.2A``.
+- **current** (*Optional*): Use the current value of the sensor in amperes. All options from
+  :ref:`Sensor <config-sensor>`.
+- **power** (*Optional*): Use the power value of the sensor in watts. All options from
+  :ref:`Sensor <config-sensor>`.
+- **bus_voltage** (*Optional*): Use the bus voltage (voltage of the high side contact) value of the sensor in V.
+  All options from :ref:`Sensor <config-sensor>`.
+- **shunt_voltage** (*Optional*): Use the shunt voltage (voltage across the shunt resistor) value of the sensor in V.
+  All options from :ref:`Sensor <config-sensor>`.
+- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the sensor. Defaults to ``60s``.
+
+
+See Also
+--------
+
+- :ref:`sensor-filters`
+- :doc:`ina219`
+- :doc:`ina3221`
+- :apiref:`ina226/ina226.h`
+- `INA226 Arduino Library <https://github.com/SV-Zanshin/INA226>`__
+- :ghedit:`Edit`

components/sensor/max31855.rst

@@ -8,7 +8,7 @@ MAX31855 K-Type Thermocouple Temperature Sensor
 The ``max31855`` temperature sensor allows you to use your max31855 thermocouple
 temperature sensor (`datasheet <https://datasheets.maximintegrated.com/en/ds/MAX31855.pdf>`__) with ESPHome
 
-As the communication with the MAX66775 is done using SPI, you need
+As the communication with the MAX31855 is done using SPI, you need
 to have an :ref:`spi bus <spi>` in your configuration with the **miso_pin** set (mosi is not required).
 
 Connect ``GND`` to ``GND``, ``VCC`` to ``3.3V`` and the other three ``MISO`` (or ``SO`` for short),
@@ -37,9 +37,8 @@ Configuration variables:
 - **name** (**Required**, string): The name for the temperature sensor.
 - **cs_pin** (**Required**, :ref:`Pin Schema <config-pin_schema>`): The Chip Select pin of the SPI interface.
 - **update_interval** (*Optional*, :ref:`config-time`): The interval to check the sensor. Defaults to ``60s``.
-
-- **spi_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the :ref:`SPI Component <spi>` if you want
-  to use multiple SPI buses.
+- **reference_temperature** (*Optional*, :ref:`Sensor <config-sensor>`): Access the internal temperature sensor of the MAX31855. Requires a **name** and/or **id**.
+- **spi_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the :ref:`SPI Component <spi>` if you want to use multiple SPI buses.
 - **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Sensor <config-sensor>`.
 
@@ -51,6 +50,7 @@ See Also
 - :doc:`dht`
 - :doc:`adc`
 - :doc:`max6675`
+- :doc:`max31865`
 - `MAX31855 Library <https://github.com/adafruit/Adafruit-MAX31855-library>`__ by `Adafruit <https://www.adafruit.com/>`__
 - :apiref:`max31855/max31855.h`
 - :ghedit:`Edit`

components/sensor/max31865.rst

@@ -0,0 +1,70 @@
+MAX31865 Platinum RTD Temperature Sensor
+========================================
+
+.. seo::
+    :description: Instructions for setting up MAX31865 platinum RTD temperature sensors.
+    :image: max31865.jpg
+
+The ``max31865`` temperature sensor allows you to use your max31865 RTD
+temperature sensor (`datasheet <https://datasheets.maximintegrated.com/en/ds/MAX31865.pdf>`__) with ESPHome
+
+.. figure:: images/max31865-full.jpg
+    :align: center
+    :width: 50.0%
+
+    MAX31865 Sensor. Image by `Adafruit`_
+
+.. _Adafruit: https://www.adafruit.com/product/3328
+
+As the communication with the MAX31865 is done using SPI, you need
+to have an :ref:`spi bus <spi>` in your configuration with both **miso_pin** and **mosi_pin** set.
+
+- ``VIN`` connects to 5V (``3V3`` will output 3.3V), or directly connect ``3V3`` to 3.3V
+- ``GND`` connects to ground
+- ``CLK`` connects to the SPI **clk_pin**
+- ``SDO`` connects to the SPI **miso_pin**
+- ``SDI`` connects to the SPI **mosi_pin**
+- ``CS`` connects to a free GPIO pin
+- ``RDY`` is not used by ESPHome
+
+.. code:: yaml
+
+    # Example configuration entry
+    spi:
+      miso_pin: D0
+      mosi_pin: D1
+      clk_pin: D2
+
+    sensor:
+      - platform: max31865
+        name: "Living Room Temperature"
+        cs_pin: D3
+        reference_resistance: 430 Ω
+        rtd_nominal_resistance: 100 Ω
+
+Configuration variables:
+------------------------
+
+- **name** (**Required**, string): The name for the temperature sensor.
+- **cs_pin** (**Required**, :ref:`Pin Schema <config-pin_schema>`): The Chip Select pin of the SPI interface.
+- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the sensor. Defaults to ``60s``.
+- **reference_resistance** (**Required**, float): Reference resistor on the PCB. Adafruit's PT100 (#3328) uses 430 Ω, their PT1000 (#3648) uses 4300 Ω.
+- **rtd_nominal_resistance** (**Required**, float): Nominal resistance of the RTD at 0°C. PT100 is 100 Ω, PT1000 is 1000 Ω.
+- **mains_filter** (*Optional*, string): The mains power frequency to reject (``50 Hz`` or ``60 Hz``). Defaults to ``60 Hz``.
+- **rtd_wires** (*Optional*, int): The number of RTD wires. Be sure to solder board jumpers to match! Defaults to ``4``.
+- **spi_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the :ref:`SPI Component <spi>` if you want to use multiple SPI buses.
+- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
+- All other options from :ref:`Sensor <config-sensor>`.
+
+See Also
+--------
+
+- :ref:`sensor-filters`
+- :doc:`dallas`
+- :doc:`dht`
+- :doc:`adc`
+- :doc:`max6675`
+- :doc:`max31855`
+- `MAX31865 Library <https://github.com/adafruit/Adafruit_MAX31865>`__ by `Adafruit <https://www.adafruit.com/>`__
+- :apiref:`max31865/max31865.h`
+- :ghedit:`Edit`

components/sensor/ruuvitag.rst

@@ -0,0 +1,187 @@
+RuuviTag Open Source BLE Sensor
+===============================
+
+.. seo::
+    :description: Instructions for setting up RuuviTag bluetooth-based sensors in ESPHome.
+    :image: ruuvitag.jpg
+    :keywords: Ruuvi, RuuviTag, BLE, Bluetooth
+
+The ``ruuvitag`` sensor platform lets you track the output of RuuviTag
+Bluetooth Low Energy devices using the :doc:`/components/esp32_ble_tracker`.
+This component will track the temperature, humidity, acceleration and battery
+voltage of a RuuviTag device with RAWv1 protocol every time the sensor sends
+out a BLE broadcast. RAWv2 protocol is supported too. Then tx power,
+movement count and measurement sequence number are also tracked.
+
+.. figure:: images/ruuvitag-full.jpg
+    :align: center
+    :width: 80.0%
+
+    RuuviTagSensor over BLE.
+
+.. figure:: images/ruuvitag-ui.jpg
+    :align: center
+    :width: 80.0%
+
+.. code-block:: yaml
+
+    # Example configuration entry
+    esp32_ble_tracker:
+
+    sensor:
+    - platform: ruuvitag
+      mac_address: FF:56:D3:2F:7D:E8
+      humidity:
+        name: "RuuviTag Humidity"
+      temperature:
+        name: "RuuviTag Temperature"
+      pressure:
+        name: "RuuviTag Pressure"
+      acceleration:
+        name: "RuuviTag Acceleration"
+      acceleration_x:
+        name: "RuuviTag Acceleration X"
+      acceleration_y:
+        name: "RuuviTag Acceleration Y"
+      acceleration_z:
+        name: "RuuviTag Acceleration Z"
+      battery_voltage:
+        name: "RuuviTag Battery Voltage"
+      tx_power:
+        name: "RuuviTag TX Power"
+      movement_counter:
+        name: "RuuviTag Movement Counter"
+      measurement_sequence_number:
+        name: "RuuviTag Measurement Sequence Number"
+
+Configuration variables:
+------------------------
+
+- **mac_address** (**Required**, MAC Address): The MAC address of the RuuviTag
+  device.
+- **humidity** (*Optional*): The information for the humidity sensor
+
+  - **name** (**Required**, string): The name for the humidity sensor.
+  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use
+    in lambdas.
+  - All other options from :ref:`Sensor <config-sensor>`.
+
+- **temperature** (*Optional*): The information for the temperature sensor.
+
+  - **name** (**Required**, string): The name for the temperature sensor.
+  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use
+    in lambdas.
+  - All other options from :ref:`Sensor <config-sensor>`.
+
+- **pressure** (*Optional*): The information for the pressure sensor.
+
+  - **name** (**Required**, string): The name for the pressure sensor.
+  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use
+    in lambdas.
+  - All other options from :ref:`Sensor <config-sensor>`.
+
+- **acceleration** (*Optional*): The information for the acceleration
+  sensor.
+
+  - **name** (**Required**, string): The name for the acceleration sensor.
+  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use
+    in lambdas.
+  - All other options from :ref:`Sensor <config-sensor>`.
+
+- **acceleration_x** (*Optional*): The information for the acceleration x
+  sensor.
+
+  - **name** (**Required**, string): The name for the acceleration x sensor.
+  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use
+    in lambdas.
+  - All other options from :ref:`Sensor <config-sensor>`.
+
+- **acceleration_y** (*Optional*): The information for the acceleration y
+  sensor.
+
+  - **name** (**Required**, string): The name for the acceleration y sensor.
+  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use
+    in lambdas.
+  - All other options from :ref:`Sensor <config-sensor>`.
+
+- **acceleration_z** (*Optional*): The information for the acceleration z
+  sensor.
+
+  - **name** (**Required**, string): The name for the acceleration z sensor.
+  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use
+    in lambdas.
+  - All other options from :ref:`Sensor <config-sensor>`.
+
+- **battery_voltage** (*Optional*): The information for the battery voltage
+  sensor.
+
+  - **name** (**Required**, string): The name for the battery voltage sensor.
+  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use
+    in lambdas.
+  - All other options from :ref:`Sensor <config-sensor>`.
+
+- **tx_power** (*Optional*): The information for the transmit power
+  sensor
+
+  - **name** (**Required**, string): The name for the transmit power sensor.
+  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use
+    in lambdas.
+  - All other options from :ref:`Sensor <config-sensor>`.
+  - Only available if RAWv2 protocol is used.
+
+- **movement_count** (*Optional*): The information for the movement count
+  sensor
+
+  - **name** (**Required**, string): The name for the movement count sensor.
+  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use
+    in lambdas.
+  - All other options from :ref:`Sensor <config-sensor>`.
+  - Only available if RAWv2 protocol is used.
+
+- **measurement_sequence_number** (*Optional*): The information for the
+  measurment sequence number sensor
+
+  - **name** (**Required**, string): The name for the measurment sequence
+    number sensor.
+  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use
+    in lambdas.
+  - All other options from :ref:`Sensor <config-sensor>`.
+  - Only available if RAWv2 protocol is used.
+
+Setting Up Devices
+------------------
+
+To set up RuuviTag devices you first need to find their MAC Address so that
+ESPHome can identify them. So first, create a simple configuration without any
+``ruuvitag`` entries like so:
+
+.. code-block:: yaml
+
+    esp32_ble_tracker:
+
+After uploading the ESP32 will immediately try to scan for BLE devices.
+When it detects these sensors, it will automatically parse the BLE message
+print a message like this one:
+
+.. code::
+
+    Got ruuvi RuuviTag (FF:56:D3:2F:7D:E8): Humidity: 67.5%, Temperature: 22.97°C,
+    Pressure: 977.09hPa, Acceleration X: 0.005G, Acceleration Y: 0.017G, Acceleration Z: 1.066G,
+    Battery Voltage: 3.223V
+
+Then just copy the address (``FF:56:D3:2F:7D:E8``) into a new
+``sensor.ruuvitag`` platform entry like in the configuration example at the top.
+
+.. note::
+
+    The ESPHome Ruuvi BLE integration listens passively to packets the RuuviTag device sends by itself.
+    ESPHome therefore has no impact on the battery life of the device.
+
+See Also
+--------
+
+- :doc:`/components/esp32_ble_tracker`
+- :doc:`/components/sensor/index`
+- :apiref:`ruuvitag/ruuvitag.h`
+- `Ruuvi <https://ruuvi.com>`__
+- :ghedit:`Edit`

guides/automations.rst

@@ -368,6 +368,7 @@ All Actions
 - :ref:`sim800l.send_sms <sim800l-send_sms_action>`
 - :ref:`mhz19.calibrate_zero <mhz19-calibrate_zero_action>` / :ref:`mhz19.abc_enable <mhz19-abc_enable_action>` / :ref:`mhz19.abc_disable <mhz19-abc_disable_action>`
 - :ref:`sensor.rotary_encoder.set_value <sensor-rotary_encoder-set_value_action>`
+- :ref:`http_request.get <http_request-get_action>` / :ref:`http_request.post <http_request-post_action>` / :ref:`http_request.send <http_request-send_action>`
 
 .. _config-condition:
 

images/connection.svg

@@ -0,0 +1 @@
+<?xml version="1.0" ?><svg height="48" viewBox="0 0 48 48" width="48" xmlns="http://www.w3.org/2000/svg"><path d="M0 0h48v48H0z" fill="none"/><path d="M15.54 13.52l-3.08-2.55L1.64 24l10.82 13.04 3.08-2.55L6.84 24l8.7-10.48zM14 26h4v-4h-4v4zm20-4h-4v4h4v-4zm-12 4h4v-4h-4v4zm13.54-15.04l-3.08 2.55L41.16 24l-8.7 10.48 3.08 2.55L46.36 24 35.54 10.96z"/></svg>

index.rst

@@ -117,10 +117,12 @@ Sensor Components
     Home Assistant, components/sensor/homeassistant, home-assistant.svg
     HX711, components/sensor/hx711, hx711.jpg
     INA219, components/sensor/ina219, ina219.jpg
+    INA226, components/sensor/ina226, ina226.jpg
     INA3221, components/sensor/ina3221, ina3221.jpg
     Integration, components/sensor/integration, sigma.svg
     HTU21D, components/sensor/htu21d, htu21d.jpg
     MAX31855, components/sensor/max31855, max31855.jpg
+    MAX31865, components/sensor/max31865, max31865.jpg
     MAX6675, components/sensor/max6675, max6675.jpg
     MH-Z19, components/sensor/mhz19, mhz19.jpg
     MPU6050, components/sensor/mpu6050, mpu6050.jpg
@@ -135,6 +137,7 @@ Sensor Components
     PZEM DC, components/sensor/pzemdc, pzemdc.svg
     Resistance, components/sensor/resistance, omega.svg
     Rotary Encoder, components/sensor/rotary_encoder, rotary_encoder.jpg
+    RuuviTag, components/sensor/ruuvitag, ruuvitag.jpg
     SenseAir, components/sensor/senseair, senseair_s8.jpg
     SDS011 Sensor, components/sensor/sds011, sds011.jpg
     SCD30, components/sensor/scd30, scd30.jpg
@@ -302,6 +305,7 @@ Misc Components
     Remote Receiver, components/remote_receiver, remote.svg
     Remote Transmitter, components/remote_transmitter, remote.svg
     Status LED, components/status_led, led-on.svg
+    HTTP Request, components/http_request, connection.svg
 
     Time, components/time, clock-outline.svg
     Sun, components/sun, weather-sunny.svg