diff --git a/components/sensor/ezo.rst b/components/sensor/ezo.rst
index 042722250..fd7e2b7a4 100644
--- a/components/sensor/ezo.rst
+++ b/components/sensor/ezo.rst
@@ -9,6 +9,8 @@ EZO sensor circuits
 The ``ezo`` sensor platform allows you to use your EZO sensor circuits with
 ESPHome. The :ref:`I²C Bus <i2c>` is
 required to be set up in your configuration for this sensor to work.
+All embedded solutions from EZO can be found `here <https://atlas-scientific.com/embedded-solutions/>`__.
+If a certain command is not supported directly, it can be executed with the ``send_custom()`` method call.
 
 .. figure:: images/ezo-ph-circuit.png
     :align: center
@@ -43,20 +45,145 @@ Configuration variables:
 - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
 - All other options from :ref:`Sensor <config-sensor>`.
 
+.. _evo_callbacks:
+
+Callbacks
+---------
+
+- **on_led:** : Triggered when the result of ``get_led_state()`` is ready.  The LED state is provided as a boolean variable named ``x``.
+- **on_device_information:** : Triggered when the result of ``get_device_information()`` is ready.  The result is provided as a ``std::string`` variable named ``x``.
+- **on_slope:** : Triggered when the result of ``get_slope()`` is ready.  The result is provided as a ``std::string`` variable named ``x``.
+- **on_calibration:** : Triggered when the result of ``get_calibration()`` is ready.  The result is provided as a ``std::string`` variable named ``x``.
+- **on_t:** : Triggered when the result of ``get_t()`` is ready.  The result is provided as a ``std::string`` variable named ``x``.
+- **on_custom:** : Triggered when the result of ``get_custom()`` is ready.  The result is provided as a ``std::string`` variable named ``x``.
+
+.. _evo_lambda_calls:
+
 lambda calls
 ------------
 
-From :ref:`lambdas <config-lambda>`, you can set the temperature compensation for the
-sensors that support that option.
+From :ref:`lambdas <config-lambda>`, you can interact with the sensor in various ways. For any ``get`` command a trigger will be called with the information retrieved from the sensor. See :ref:`evo_callbacks`. For more information on the command specifics, refer to the datasheet.
 
-- ``set_tempcomp_value()``: Send the given temperature to the sensor.
+- ``set_i2c(uint8_t address)``: Set I2C address of the device, must be an integer between 1 and 127
+
+  .. code-block:: cpp
+
+      id(ph_ezo).set_i2c(100);
+
+
+- ``get_device_information()``: Sensor retrieves calibration and triggers ``on_device_information:`` once done
+
+  .. code-block:: cpp
+
+      id(ph_ezo).get_device_information();
+
+
+- ``set_sleep()``:  Put the device to sleep
+
+  .. code-block:: cpp
+
+      id(ph_ezo).set_sleep();
+
+
+- ``get_state()``: Performs a read on the current sensor.
+
+  .. code-block:: cpp
+
+      id(ph_ezo).get_state();
+
+
+- ``get_slope()``: Sensor retrieves slope and triggers ``on_slope:`` once done
+
+  .. code-block:: cpp
+
+      id(ph_ezo).get_slope();
+
+
+- ``get_t()``: Sensor retrieves temperature compensation value (in Celcius) and triggers ``on_t:`` once done
+
+  .. code-block:: cpp
+
+      id(ph_ezo).get_t();
+
+
+- ``set_t(float value)``: Send the given temperature (in Celcius) to the sensor.
+
+  .. code-block:: cpp
+
+      id(ph_ezo).set_t("27.00");
+
+
+- ``set_tempcomp_value(float temp)``: Send the given temperature (in Celcius) to the sensor (this is an alias of `set_t()` for backwards compatibility)
 
   .. code-block:: cpp
 
-      // Within a lambda, set the temperature compensation value from the temperature sensor
       id(ph_ezo).set_tempcomp_value(id(rtd_ezo).state);
 
 
+- ``get_calibration()``: Sensor retrieves calibration and triggers ``on_calibration:`` once done
+
+  .. code-block:: cpp
+
+      id(ph_ezo).get_calibration();
+
+
+- ``set_calibration_generic(float value)``: Sets the calibration with no point.
+
+  .. code-block:: cpp
+
+      id(ph_ezo).set_calibration_generic(750.0);
+
+
+- ``set_calibration_point_low(float value)``: Sets the low calibration point.
+
+  .. code-block:: cpp
+
+      id(ph_ezo).set_calibration_point_low(4.00);
+
+
+- ``set_calibration_point_mid(float value)``: Sets the medium calibration point.
+
+  .. code-block:: cpp
+
+      id(ph_ezo).set_calibration_point_mid(7.00);
+
+
+- ``set_calibration_point_high(float value)``: Sets the high calibration point.
+
+  .. code-block:: cpp
+
+      id(ph_ezo).set_calibration_point_low(10.00);
+
+
+- ``clear_calibration()``: Clears all calibration points.
+
+  .. code-block:: cpp
+
+      id(ph_ezo).clear_calibration();
+
+
+- ``get_led_state()``: Sensor LED state and triggers ``on_led:`` once done
+
+  .. code-block:: cpp
+
+      id(ph_ezo).get_led_state();
+
+
+- ``set_led_state(bool on)``: Sensor LED on or off
+
+  .. code-block:: cpp
+
+      id(ph_ezo).set_led_state(true);
+
+
+- ``send_custom(const std::string &payload, uint16_t delay_ms = 300, bool response_expected = false)``: Runs a custom command. This sends exactly what is in ``payload``. Optionally you can set a ``delay`` and if a response is expected that should be parsed. Defaults to ``false`` for custom commands.  Triggers ``on_custom:`` if there's a response.
+
+  .. code-block:: cpp
+
+      // Run a custom command to turn on the LED
+      id(ph_ezo).send_custom("L,1");
+
+
 See Also
 --------