Update Tuya Climate for new esphome PR (#3096)

* Update Tuya Climate for new esphome PR

Update Tuya Climate to document related to https://github.com/esphome/esphome/pull/5159

* Remove Deprecated Config Block

Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>

* Update tuya.rst

* Restore basic device configuration sample block, will use more specific examples in the device repo

* Apply suggestions from code review

Copy fixes

---------

Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: H. Árkosi Róbert <robreg@zsurob.hu>
Co-authored-by: Keith Burzinski <kbx81x@gmail.com>

components/climate/tuya.rst

@@ -39,8 +39,10 @@ Based on this, you can create the climate device as follows:
         switch_datapoint: 1
         target_temperature_datapoint: 3
         current_temperature_datapoint: 4
-        eco_datapoint: 7
+        preset:
-        eco_temperature: 20 °C
+          eco:
+            datapoint: 8
+            temperature: 28
 
 Configuration variables:
 ------------------------
@@ -50,16 +52,40 @@ Configuration variables:
 - **supports_heat** (*Optional*, boolean): Specifies if the device has a heating mode. Defaults to ``true``.
 - **supports_cool** (*Optional*, boolean): Specifies if the device has a cooling mode. Defaults to ``false``.
 - **switch_datapoint** (**Required**, int): The datapoint id number of the climate switch (device on/off).
-- **active_state_datapoint** (*Optional*, int): The datapoint id number of the active state - :ref:`see below <active_state_detection>`.
+- **active_state** (*Optional*): Configuration for the Active State Configuration.
-- **active_state_heating_value** (*Optional*, int): The active state datapoint value the device reports when heating. Defaults to ``1`` - :ref:`see below <active_state_detection>`.
+
-- **active_state_cooling_value** (*Optional*, int): The active state datapoint value the device reports when cooling - :ref:`see below <active_state_detection>`.
+    - **datapoint** (**Required**, int): The datapoint id number of the active state - :ref:`see below <active_state_detection>`.
+    - **heating_value** (*Optional*, int): The active state datapoint value the device reports when heating. Defaults to ``1`` - :ref:`see below <active_state_detection>`.
+    - **cooling_value** (*Optional*, int): The active state datapoint value the device reports when cooling - :ref:`see below <active_state_detection>`.
+    - **drying_value** (*Optional*, int): The active state datapoint value the device reports when in drying mode.
+    - **fanonly_value** (*Optional*, int): The active state datapoint value the device reports when in Fan Only mode.
+- **preset** (*Optional*): Configuration for presets.
+
+    - **eco** (*Optional*): Configuration for Eco preset.
+
+        - **datapoint** (**Required**, int): The datapoint id number of the Eco action.
+        - **temperature** (*Optional*, int): Temperature setpoint for Eco preset.
+    - **sleep** (*Optional*): Configuration for Sleep preset
+
+        - **datapoint** (**Required**, int): The Datapoint id number of the Sleep Action
+- **swing_mode** (*Optional*): Configuration for the swing (oscillation) modes.
+
+    - **vertical_datapoint** (*Optional*, int): The datapoint id number of the vertical swing action.
+    - **horizontal_datapoint** (*Optional*, int): The datapoint id number of the horizontal swing action.
+- **fan_mode** (*Optional*): Configuration for fan modes/fan speeds.
+
+    - **datapoint** (**Required**, int): The datapoint id number of the Fan value state.
+    - **auto_value** (*Optional*, int): The datapoint value the device reports when the fan is on ``auto`` speed.
+    - **low_value** (*Optional*, int):  The datapoint value the device reports when the fan is on ``low`` speed.
+    - **medium_value** (*Optional*, int):  The datapoint value the device reports when the fan is on ``medium`` speed.
+    - **middle_value** (*Optional*, int):  The datapoint value the device reports when the fan is on ``middle`` speed. (May set to device's ``high`` value if you have a ``Turbo`` option).
+    - **high_value** (*Optional*, int):  The datapoint value the device reports when the fan is on ``high`` speed. (Sometimes called ``Turbo``).
 - **heating_state_pin** (*Optional*, :ref:`config-pin`): The input pin indicating that the device is heating - :ref:`see below <active_state_detection>`. Only used if **active_state_datapoint** is not configured.
 - **cooling_state_pin** (*Optional*, :ref:`config-pin`): The input pin indicating that the device is cooling - :ref:`see below <active_state_detection>`. Only used if **active_state_datapoint** is not configured.
 - **target_temperature_datapoint** (**Required**, int): The datapoint id number of the target temperature.
 - **current_temperature_datapoint** (**Required**, int): The datapoint id number of the current temperature.
 - **temperature_multiplier** (*Optional*, float): A multiplier to modify the incoming and outgoing temperature values - :ref:`see below <temperature-multiplier>`.
-- **eco_datapoint** (*Optional*, int): The datapoint id number of the eco mode state.
+
-- **eco_temperature** (*Optional*, float): The target temperature the controller uses while the eco mode is active.
 - **reports_fahrenheit** (*Optional*, boolean): Set to ``true`` if the device reports temperatures in Fahrenheit. ESPHome expects all climate temperatures to be in Celcius, otherwise unexpected conversions will take place when it is published to Home Assistant. Defaults to ``false``.
 
 If the device has different multipliers for current and target temperatures, **temperature_multiplier** can be replaced with both of: