diff --git a/components/sensor/images/mopeka_pro_check.jpg b/components/sensor/images/mopeka_pro_check.jpg
new file mode 100644
index 000000000..249f32a63
Binary files /dev/null and b/components/sensor/images/mopeka_pro_check.jpg differ
diff --git a/components/sensor/mopeka_ble.rst b/components/sensor/mopeka_ble.rst
new file mode 100644
index 000000000..6c787dfec
--- /dev/null
+++ b/components/sensor/mopeka_ble.rst
@@ -0,0 +1,137 @@
+Mopeka Pro Check BLE Sensor
+===============================
+
+.. seo::
+    :description: Instructions for setting up Mopeka Pro Check bluetooth-based sensors in ESPHome.
+    :image: mopeka_pro_check.jpg
+    :keywords: Mopeka, Mopeka Pro Check, BLE, Bluetooth
+
+The ``mopeka_pro_check`` sensor platform lets you track the output of Mopeka 
+Pro Check LP Bluetooth Low Energy devices using the :doc:`/components/esp32_ble_tracker`.
+This component will track the tank level, distance, temperature, and battery
+percentage of a Mopeka Pro Check LP device every time the sensor sends
+out a BLE broadcast.
+
+.. warning::
+
+    This sensor component only supports the Mopeka Pro Check device.  The original
+    Mopeka Check sensors are not supported.
+
+.. figure:: images/mopeka_pro_check.jpg
+    :align: center
+
+    Mopeka Pro Check LP over BLE.
+
+.. code-block:: yaml
+
+    esp32_ble_tracker:
+
+    sensor:
+    # Example using 20lb vertical propane tank.
+    - platform: mopeka_pro_check
+      mac_address: D3:75:F2:DC:16:91
+      tank_type: 20LB_V
+      temperature:
+          name: "Propane test temp"
+      level:
+          name: "Propane test level"
+      distance:
+          name: "Propane test distance"
+      battery_level:
+          name: "Propane test battery level"
+
+    # Custom example - user defined empty / full points
+    - platform: mopeka_pro_check
+      mac_address: D3:75:F2:DC:16:91
+      tank_type: CUSTOM
+      custom_distance_full: 40cm
+      custom_distance_empty: 10mm
+      temperature:
+          name: "Propane c test temp"
+      level:
+          name: "Propane c test level"
+      distance:
+          name: "Propane c test distance"
+      battery_level:
+          name: "Propane c test battery level"
+
+
+Configuration variables:
+------------------------
+
+- **mac_address** (**Required**, MAC Address): The MAC address of the Mopeka
+  device.
+
+- **tank_type** (**Required**): The tank type the sensor is measuring. See below.
+
+- **custom_distance_full** (*Optional*): distance sensor will read when it should be
+  considered full (100%).  This is only used when tank_type = CUSTOM
+
+- **custom_distance_empty** (*Optional*): distance sensor will read when it should be
+  considered empty (0%).  This is only used when tank_type = CUSTOM
+
+- **level** (*Optional*): The percentage of full for the tank sensor
+
+  - All options from :ref:`Sensor <config-sensor>`.
+
+- **distance** (*Optional*): The raw distance/depth of the liquid for the sensor in mm.
+
+  - All options from :ref:`Sensor <config-sensor>`.
+
+- **temperature** (*Optional*): The information for the temperature sensor.
+  This temperature is on the sensor and is not calibrated to ambient temperature.
+
+  - All options from :ref:`Sensor <config-sensor>`.
+
+- **battery_level** (*Optional*): The information for the battery percentage
+  sensor.  Sensor uses a standard CR2032 battery.
+
+  - All options from :ref:`Sensor <config-sensor>`.
+
+Tank Types
+----------
+
+Currently supported Tank types are:
+
+- ``20LB_V`` - 20 LB vertical tank
+- ``30LB_V`` - 30 LB vertical tank
+- ``40LB_V`` - 40 LB vertical tank
+- ``CUSTOM`` - Allows you to define your own full and empty points
+
+Setting Up Devices
+------------------
+
+To set up Mopeka Pro Check devices you first need to find their MAC Address so that
+ESPHome can identify them. So first, create a simple configuration with the ``esp32_ble_tracker``
+and the ``mopeka_ble`` component like so:
+
+.. code-block:: yaml
+
+    esp32_ble_tracker:
+
+    mopeka_ble:
+
+After uploading, the ESP32 will immediately try to scan for BLE devices.  For Mopeka Pro
+Check devices you must press and hold the green sync button for it to be identified.  For all sensors
+found the ``mopeka_ble`` component will print a message like this one:
+
+.. code::
+
+    [20:43:26][I][mopeka_ble:040]: SENSOR FOUND: D3:75:F2:DC:16:91
+
+Then just copy the address (``D3:75:F2:DC:16:91``) into a new
+``sensor.mopeka_pro_check`` platform entry like in the configuration example at the top.
+
+.. note::
+
+    The ESPHome Mopeka Pro Check BLE integration listens passively to packets the Mopeka device sends by itself.
+    ESPHome therefore has no impact on the battery life of the device.
+
+See Also
+--------
+
+- :doc:`/components/esp32_ble_tracker`
+- :doc:`/components/sensor/index`
+- :apiref:`mopeka_pro_check/mopeka_pro_check.h`
+- `Mopeka  <https://mopeka.com/product/mopeka-check-pro-lp-sensor/>`__
+- :ghedit:`Edit`
diff --git a/images/mopeka_pro_check.jpg b/images/mopeka_pro_check.jpg
new file mode 100644
index 000000000..249f32a63
Binary files /dev/null and b/images/mopeka_pro_check.jpg differ
diff --git a/index.rst b/index.rst
index f61c1a4e0..513cfd826 100644
--- a/index.rst
+++ b/index.rst
@@ -221,6 +221,7 @@ Bluetooth Low Energy (BLE)
     BLE Client Sensor, components/sensor/ble_client, bluetooth.svg
     BLE RSSI, components/sensor/ble_rssi, bluetooth.svg
     Inkbird IBS-TH1 Mini, components/sensor/inkbird_ibsth1_mini, inkbird_isbth1_mini.jpg, Temperature & Humidity
+    Mopeka Pro Check LP, components/sensor/mopeka_pro_check, mopeka_pro_check.jpg, tank level
     RuuviTag, components/sensor/ruuvitag, ruuvitag.jpg, Temperature & Humidity & Accelerometer
     Xiaomi BLE, components/sensor/xiaomi_ble, xiaomi_mijia_logo.jpg, Various