Merge branch 'current' into next

components/remote_transmitter.rst

@@ -74,6 +74,9 @@ Configuration variables:
 
 - **transmitter_id** (*Optional*, :ref:`config-id`): The remote transmitter to send the
   remote code with. Defaults to the first one defined in the configuration.
+  
+If you're looking for the same functionality as is default in the ``rpi_rf`` integration in
+Home Assistant, you'll want to set the **times** to 10 and the **wait_time** to 0s.
 
 .. _remote_transmitter-transmit_raw:
 

components/sensor/apds9960.rst

@@ -76,6 +76,11 @@ Binary Sensor Configuration:
 - **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Binary Sensor <config-binary_sensor>`.
 
+Troubleshooting:
+----------------
+
+With some APDS9960 modules the VL pin needs to be supplied with 3.3V for gesture sensing to work.  The VL pin provides power for the infrared LED that is used to detect gestures.  There may be two pads on the module which, if shorted with a solder joint, cause the main VCC power pin to supply power for the infrared LED as well.  However, providing a separate power supply via the VL pin may help to isolate the rest of the circuit from noise created by pulsing the infrared LED at relatively high power.
+
 See Also
 --------
 

devices/sonoff_basic.rst

@@ -54,8 +54,7 @@ exposes all of the basic functions.
     esphome:
       name: <NAME_OF_NODE>
       platform: ESP8266
-      board: esp8285
-      arduino_version: 2.4.2
+      board: esp01_1m
 
     wifi:
       ssid: <YOUR_SSID>

guides/diy.rst

@@ -98,3 +98,4 @@ Sample Configurations
 - `Control LG UD79-B monitor via UART <https://github.com/kquinsland/lg-m43mu79-esp-home-bridge>`__ by :ghuser:`kquinsland`
 - `ESPHome AXA Remote 2 control <https://github.com/galagaking/espaxa/>`__ by :ghuser:`galagaking`
 - `ESPHome WF-DS01 TuyaMCU based dimmable bedside touch lamp <https://github.com/davet2001/miscellaneous/blob/master/tuyamcu_ws-df01_touchlamp.yaml>`__ by :ghuser:`davet2001`
+- `Universal menu system for devices with rotary encoder with push and SSD1306 I2C display <https://github.com/mikosoft83/pithy_screen_menu_system>`__ by :ghuser:`mikosoft83`