Merge e405076951 into 696a828156

components/remote_receiver.rst

@@ -59,6 +59,7 @@ Configuration variables:
   - **samsung36**: Decode and dump Samsung36 infrared codes.
   - **sony**: Decode and dump Sony infrared codes.
   - **toshiba_ac**: Decode and dump Toshiba AC infrared codes.
+  - **tr_502msv**: Decode and dump TR-502MSV RF codes.
 
 - **tolerance** (*Optional*, int, :ref:`config-time` or mapping): The percentage or time that the remote signal lengths can
   deviate in the decoding process.  Defaults to ``25%``.
@@ -189,6 +190,9 @@ Automations:
 - **on_toshiba_ac** (*Optional*, :ref:`Automation <automation>`): An automation to perform when a
   Toshiba AC remote code has been decoded. A variable ``x`` of type :apistruct:`remote_base::ToshibaAcData`
   is passed to the automation for use in lambdas.
+- **on_tr_502msv** (*Optional*, :ref:`Automation <automation>`): An automation to perform when a
+  TR-502MSV remote code has been decoded. A variable ``x`` of type :apistruct:`remote_base::TR502MSVData`
+  is passed to the automation for use in lambdas.
 
 .. code-block:: yaml
 
@@ -430,6 +434,24 @@ Remote code selection (exactly one of these has to be included):
   - **rc_code_1** (**Required**, int): The remote control code to trigger on, see dumper output for more details.
   - **rc_code_2** (*Optional*, int): The second part of the remote control code to trigger on, see dumper output for more details.
 
+- **tr_502msv**: Trigger on a decoded TR-502MSV remote code with the given data.
+
+  - **group** (**Required**, int): The group code to trigger on, see dumper output for more details.
+  - **device** (**Required**, enum): The device code to trigger on, see dumper output for more details.
+
+    - ``1``
+    - ``2``
+    - ``3``
+    - ``4``
+    - ``all``
+
+  - **command** (**Required**, enum): The command to trigger on, see dumper output for more details.
+
+    - ``turn_off``
+    - ``turn_on``
+    - ``increase_brightness``
+    - ``decrease_brightness``
+
 .. note::
 
     The **CanalSat** and **CanalSatLD** protocols use a higher carrier frequency (56khz) and are very similar.

components/remote_transmitter.rst

@@ -845,7 +845,7 @@ Configuration variables:
 ``remote_transmitter.transmit_sony`` Action
 *******************************************
 
-This :ref:`action <config-action>` a Sony infrared remote code to a remote transmitter.
+This :ref:`action <config-action>` sends a Sony infrared remote code to a remote transmitter.
 
 .. code-block:: yaml
 
@@ -886,6 +886,40 @@ Configuration variables:
 
 - All other options from :ref:`remote_transmitter-transmit_action`.
 
+.. _remote_transmitter-transmit_tr_502msv:
+
+``remote_transmitter.transmit_tr_502msv`` Action
+************************************************
+
+This :ref:`action <config-action>` sends a TR-502MSV remote code to a remote transmitter.
+
+.. code-block:: yaml
+
+    on_...:
+      - remote_transmitter.transmit_tr_502msv:
+          group: 0x123
+          device: all
+          command: turn_on
+
+Configuration variables:
+
+- **group** (**Required**, int): The group code to send, see dumper output for more details.
+- **device** (**Required**, enum): The device code to send, see dumper output for more details.
+
+  - ``1``
+  - ``2``
+  - ``3``
+  - ``4``
+  - ``all``
+
+- **command** (**Required**, enum): The command to send, see dumper output for more details.
+
+  - ``turn_off``
+  - ``turn_on``
+  - ``increase_brightness``
+  - ``decrease_brightness``
+
+- All other options from :ref:`remote_transmitter-transmit_action`.
 
 Lambda calls
 ************