Merge branch 'current' into next

_redirects

@@ -41,3 +41,4 @@
 /cookbook/dual-r2-cover.html /cookbook/lambda_magic.html#one-button-cover-control 301
 
 /ready-made/projects /projects/ 301
+/components/images /components/image 301

components/alarm_control_panel/index.rst

@@ -19,7 +19,8 @@ Base Alarm Control Panel Configuration
 
 Configuration variables:
 
-- **name** (**Required**, string): The name of the alarm control panel.
+- **id** (*Optional*, string): Manually specify the ID for code generation. At least one of **id** and **name** must be specified.
+- **name** (*Optional*, string): The name of the alarm control panel. At least one of **id** and **name** must be specified.
 
   .. note::
 
@@ -47,7 +48,7 @@ Configuration variables:
 - **on_ready** (*Optional*, :ref:`Action <config-action>`): An automation to perform
   when the logical 'and' of all the zone sensors change state. See :ref:`alarm_control_panel_on_ready_trigger`.
 - **on_chime** (*Optional*, :ref:`Action <config-action>`): An automation to perform
-  when a zone has been marked as chime in the configuration, and it changes from closed to open. 
+  when a zone has been marked as chime in the configuration, and it changes from closed to open.
   See :ref:`alarm_control_panel_on_chime_trigger`.
 - If MQTT enabled, all other options from :ref:`MQTT Component <config-mqtt-component>`.
 - If Webserver enabled, ``web_server_sorting_weight`` can be set. See :ref:`Webserver Entity Sorting <config-webserver-sorting>`.

components/binary_sensor/analog_threshold.rst

@@ -36,8 +36,6 @@ a binary sensor.
 Configuration variables
 -----------------------
 
--  **name** (**Required**, string): The name of the binary sensor.
--  **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 -  **sensor_id** (**Required**, :ref:`config-id`): The ID of the source sensor.
 -  **threshold** (**Required**, float or mapping): Configures the reference for comparison. Accepts either a shorthand
    float number that will be used as both upper/lower threshold, or a mapping to define different values for each (to

components/binary_sensor/ble_presence.rst

@@ -54,7 +54,6 @@ The ``ble_presence`` binary sensor platform lets you track the presence of a Blu
 Configuration variables:
 ------------------------
 
--  **name** (**Required**, string): The name of the binary sensor.
 -  **mac_address** (*Optional*, MAC Address): The MAC address to track for this
    binary sensor. Note that exactly one of ``mac_address``, ``irk``, ``service_uuid`` or ``ibeacon_uuid``
    must be present.
@@ -72,8 +71,6 @@ Configuration variables:
    same building.
 -  **ibeacon_minor** (*Optional*, int): The iBeacon minor identifier of the beacon that needs
    to be tracked. Usually used to identify beacons within an iBeacon group.
--  **id** (*Optional*, :ref:`config-id`): Manually specify
-   the ID used for code generation.
 -  **min_rssi** (*Optional*, int): at which minimum RSSI level would the component report the device be present.
 -  **timeout** (*Optional*, :ref:`config-time`): The delay after last detecting the device before publishing not present state.
    The default is 5 minutes.

components/binary_sensor/cap1188.rst

@@ -68,9 +68,7 @@ binary sensors for each touch sensor.
 Configuration variables:
 
 
-- **name** (*Optional*, string): The name for the binary sensor.
 - **cap1188_id** (*Optional*, :ref:`config-id`): The ID of the CAP1188 defined above. Useful for multiple CAP1188's on the I²C bus.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - **channel** (**Required**, int): The channel number the CAP1188 the touchkey is connected to.
 - All other options from :ref:`Binary Sensor <config-binary_sensor>`.
 

components/binary_sensor/esp32_touch.rst

@@ -141,8 +141,6 @@ Configuration variables:
    events on.
 -  **threshold** (**Required**, ``int``): The threshold to use to detect touch events. See
    :ref:`esp32-finding-thresholds` below for help determining this value.
--  **name** (**Required**, string): The name of the binary sensor.
--  **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 -  **wakeup_threshold** (*Optional*, ``int``): The threshold to use to detect touch events to wake-up from deep sleep.
    See :ref:`esp32-finding-thresholds` below for help determining this value. Touch pad sensors that should trigger a
    wake-up from deep sleep must specify this value. The :ref:`deep_sleep-component` must also be configured to enable

components/binary_sensor/gpio.rst

@@ -27,8 +27,6 @@ Configuration variables:
 ------------------------
 
 - **pin** (**Required**, :ref:`Pin Schema <config-pin_schema>`): The pin to periodically check.
-- **name** (**Required**, string): The name of the binary sensor.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Binary Sensor <config-binary_sensor>`.
 
 Activating internal pullups

components/binary_sensor/homeassistant.rst

@@ -30,11 +30,9 @@ With Home Assistant 2021.6 or newer, entity state attributes can also be importe
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the binary sensor.
 - **entity_id** (**Required**, string): The entity ID to import from Home Assistant.
 - **attribute** (*Optional*, string): The name of the state attribute to import from the
   specified entity. The entity state is used when this option is omitted.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Binary Sensor <config-binary_sensor>`.
 
 See Also

components/binary_sensor/hydreon_rgxx.rst

@@ -34,27 +34,15 @@ Configuration variables:
 
 - **too_cold** (*Optional*): ``true`` if the sensor reports being too cold. Hydreon only mentions this feature for the RG-9.
 
-  - **name** (**Required**, string): The name for the sensor.
+  - All options from :ref:`Binary Sensor <config-binary_sensor>`.
-
-  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
-
-  - All other options from :ref:`Binary Sensor <config-binary_sensor>`.
 
 - **lens_bad** (*Optional*): ``true`` if the sensor reports the lens being bad.
 
-  - **name** (**Required**, string): The name for the sensor.
+  - All options from :ref:`Binary Sensor <config-binary_sensor>`.
-
-  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
-
-  - All other options from :ref:`Binary Sensor <config-binary_sensor>`.
 
 - **em_sat** (*Optional*): ``true`` if the sensor reports the Emitter being saturated.
 
-  - **name** (**Required**, string): The name for the sensor.
+  - All options from :ref:`Binary Sensor <config-binary_sensor>`.
-
-  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
-
-  - All other options from :ref:`Binary Sensor <config-binary_sensor>`.
 
 
 See Also

components/binary_sensor/index.rst

@@ -27,7 +27,8 @@ you can always override it.
 
 Configuration variables:
 
-- **name** (**Required**, string): The name for the binary sensor.
+- **id** (*Optional*, string): Manually specify the ID for code generation. At least one of **id** and **name** must be specified.
+- **name** (*Optional*, string): The name for the binary sensor. At least one of **id** and **name** must be specified.
 
   .. note::
 

components/binary_sensor/modbus_controller.rst

@@ -12,8 +12,6 @@ and requires :doc:`/components/modbus_controller` to be configured.
 Configuration variables:
 ------------------------
 
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-- **name** (**Required**, string): The name of the sensor.
 - **register_type** (**Required**): type of the modbus register.
 
     - ``coil``: Coils are 1-bit registers (ON/OFF values) that are used to control discrete outputs. Read and Write access. Modbus *Function Code 1 (Read Coil Status)* will be used.

components/binary_sensor/mpr121.rst

@@ -69,9 +69,7 @@ binary sensors for each touch sensor.
 Configuration variables:
 
 
-- **name** (*Optional*, string): The name for the binary sensor.
 - **mpr121_id** (*Optional*, :ref:`config-id`): The ID of the MPR121 defined above. Useful for multiple MPR121's on the I²C bus
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - **channel** (**Required**, int): The channel number at the MPR121 the touchkey is connected to.
 - **touch_threshold** (*Optional*, int): A per-channel override of the global touch_threshold value. If not specified, uses the global value.
 - **release_threshold** (*Optional*, int): A per-channel override of the global release_threshold value. If not specified, uses the global value.

components/binary_sensor/nextion.rst

@@ -39,7 +39,6 @@ See :doc:`/components/display/nextion` for setting up the display
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the sensor.
 - **nextion_id** (*Optional*, :ref:`config-id`): The ID of the Nextion display.
 - **component_name** (*Optional*, string): The name of the Nextion component.
 - **variable_name** (*Optional*, string): The name of the Nextion variable. Any value over ``0`` is considered to be **on**

components/binary_sensor/pn532.rst

@@ -208,8 +208,6 @@ Configuration variables:
 
 - **uid** (**Required**, string): The unique ID of the NFC/RFID tag. This is a hyphen-separated list
   of hexadecimal values. For example ``74-10-37-94``.
-- **name** (**Required**, string): The name of the binary sensor.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Binary Sensor <config-binary_sensor>`.
 
 .. _pn532-setting_up_tags:

components/binary_sensor/rc522.rst

@@ -189,8 +189,6 @@ Configuration variables:
 
 - **uid** (**Required**, string): The unique ID of the NFC/RFID tag. This is a hyphen-separated list
   of hexadecimal values. For example ``74-10-37-94``.
-- **name** (**Required**, string): The name of the binary sensor.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Binary Sensor <config-binary_sensor>`.
 
 .. _rc522-setting_up_tags:

components/binary_sensor/rdm6300.rst

@@ -107,8 +107,6 @@ Configuration variables:
 ************************
 
 - **uid** (**Required**, int): The unique ID of the NFC/RFID tag.
-- **name** (**Required**, string): The name of the binary sensor.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Binary Sensor <config-binary_sensor>`.
 
 .. _rdm6300-setting_up_tags:

components/binary_sensor/status.rst

@@ -22,9 +22,7 @@ for Home Assistant.
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the binary sensor.
+- All options from :ref:`Binary Sensor <config-binary_sensor>`. (Inverted mode is not supported)
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-- All other options from :ref:`Binary Sensor <config-binary_sensor>`. (Inverted mode is not supported)
 
 See Also
 --------

components/binary_sensor/template.rst

@@ -36,12 +36,8 @@ Possible return values of the lambda:
 Configuration variables:
 ------------------------
 
--  **name** (**Required**, string): The name of the binary sensor.
 -  **lambda** (*Optional*, :ref:`lambda <config-lambda>`):
    Lambda to be evaluated repeatedly to get the current state of the binary sensor.
--  **id** (*Optional*,
-   :ref:`config-id`): Manually specify
-   the ID used for code generation.
 -  All other options from :ref:`Binary Sensor <config-binary_sensor>`.
 
 .. _binary_sensor-template-publish_action:

components/binary_sensor/ttp229.rst

@@ -47,9 +47,7 @@ The configuration is made up of two parts: The central component, and individual
 
 Configuration variables:
 
-- **name** (**Required**, string): The name of the binary sensor.
 - **channel** (**Required**, int): The channel number at the TTP229 the touchkey is connected to.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Binary Sensor <config-binary_sensor>`.
 
 ``ttp229_bsf`` Component
@@ -85,9 +83,7 @@ Base Configuration:
 
 Configuration variables:
 
-- **name** (**Required**, string): The name of the binary sensor.
 - **channel** (**Required**, int): The channel number at the TTP229 the touchkey is connected to.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Binary Sensor <config-binary_sensor>`.
 
 See Also

components/binary_sensor/tuya.rst

@@ -20,8 +20,6 @@ You can create the binary sensor as follows:
 Configuration variables:
 ------------------------
 
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-- **name** (**Required**, string): The name of the binary sensor.
 - **sensor_datapoint** (**Required**, int): The datapoint id number of the binary sensor.
 - All other options from :ref:`Binary Sensor <config-binary_sensor>`.
 

components/button/factory_reset.rst

@@ -35,9 +35,7 @@ After reboot all states, parameters and variables will be reinitialized with the
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the button.
+- All options from :ref:`Button <config-button>`.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-- All other options from :ref:`Button <config-button>`.
 
 See Also
 --------

components/button/index.rst

@@ -40,7 +40,8 @@ All buttons in ESPHome have a name and an optional icon.
 
 Configuration variables:
 
-- **name** (**Required**, string): The name for the button.
+- **id** (*Optional*, string): Manually specify the ID for code generation. At least one of **id** and **name** must be specified.
+- **name** (*Optional*, string): The name for the button. At least one of **id** and **name** must be specified.
 
   .. note::
 

components/button/output.rst

@@ -29,8 +29,6 @@ momentarily set a GPIO pin using a button.
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name for the button.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - **output** (**Required**, :ref:`config-id`): The ID of the output component to use.
 - **duration** (**Required**, :ref:`config-time`): How long the output should be set when the button is pressed.
 - All other options from :ref:`Button <config-button>`.

components/button/restart.rst

@@ -18,9 +18,7 @@ through Home Assistant.
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name for the button.
+- All options from :ref:`Button <config-button>`.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-- All other options from :ref:`Button <config-button>`.
 
 See Also
 --------

components/button/safe_mode.rst

@@ -24,9 +24,7 @@ This component requires :doc:`/components/safe_mode` to be configured.
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name for the button.
+- All options from :ref:`Button <config-button>`.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-- All other options from :ref:`Button <config-button>`.
 
 See Also
 --------

components/button/shutdown.rst

@@ -24,9 +24,7 @@ pressing the reset button or restarting the power supply.
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name for the button.
+- All options from :ref:`Button <config-button>`.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-- All other options from :ref:`Button <config-button>`.
 
 See Also
 --------

components/button/template.rst

@@ -20,9 +20,7 @@ it will automatically appear in Home Assistant as a button and can be controlled
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the switch.
+- All options from :ref:`Button <config-button>`.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-- All other options from :ref:`Button <config-button>`.
 
 See Also
 --------

components/button/uart.rst

@@ -22,8 +22,6 @@ The ``uart`` button platform allows you to send a pre-defined sequence of bytes
 Configuration variables:
 ------------------------
 
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-- **name** (*Optional*, string): The name for the button.
 - **data** (**Required**, string or list of bytes): The data to send via UART. Either an ASCII string
   or a list of bytes.
 - **uart_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the UART hub.

components/button/wake_on_lan.rst

@@ -19,9 +19,7 @@ by specifying its MAC address.
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name for the button.
 - **target_mac_address** (**Required**, MAC Address): The MAC Address of the target computer.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Button <config-button>`.
 
 See Also

components/climate/anova.rst

@@ -48,8 +48,6 @@ need to do conversion again within the frontend if you use Fahrenheit.
 Configuration variables:
 ------------------------
 
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-- **name** (**Required**, string): The name of the climate device.
 - **ble_client_id** (**Required**, :ref:`config-id`): The ID of the BLE Client.
 - **unit_of_measurement** (**Required**, string): Units to use on the device display. 'c' or 'f'.
 - All other options from :ref:`Climate <config-climate>`.

components/climate/bedjet.rst

@@ -109,8 +109,6 @@ setting the mode and target temperature.
 Configuration variables:
 ************************
 
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-- **name** (**Required**, string): The name of the climate device.
 - **bedjet_id** (**Required**, :ref:`config-id`): The ID of the Bedjet component.
 - **heat_mode** (*Optional*, string): The primary heating mode to use for ``HVACMode.HEAT``:
 
@@ -148,8 +146,6 @@ When the BedJet is already on, turning the Fan component off will set the BedJet
 Configuration variables:
 ************************
 
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-- **name** (**Required**, string): The name of the fan device.
 - **bedjet_id** (**Required**, :ref:`config-id`): The ID of the Bedjet component.
 - Other options from :ref:`Fan <config-fan>`.
 

components/climate/climate_ir.rst

@@ -88,7 +88,6 @@ controller unit.
 Configuration Variables:
 ------------------------
 
-- **name** (**Required**, string): The name for the climate device.
 - **sensor** (*Optional*, :ref:`config-id`): The sensor that is used to measure the ambient
   temperature. This is only for reporting the current temperature in the frontend.
 - **supports_cool** (*Optional*, boolean): Enables setting cooling mode for this climate device. Defaults to ``true``.
@@ -99,7 +98,6 @@ Configuration Variables:
 
 **Advanced Options**
 
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - **transmitter_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the remote transmitter.
 
 **Specific configuration variables:**
@@ -206,8 +204,8 @@ These air conditioners support two protocols: Midea and Coolix. Therefore, when
 
 - **set_fan_mode** (*Optional*, string): Select the fan modes desired or that are supported on your remote. Defaults to ``3levels``
 
-  - Options are: ``3levels`` , ``4levels``, ``quiet_4levels``. 
+  - Options are: ``3levels`` , ``4levels``, ``quiet_4levels``.
-  
+
     - ``3levels``; Low [fan speed 1], Medium [2], High [3]
     - ``4levels``; Low [1], Middle [2], Medium [3], High [4]
     - ``quiet_4levels``; Low [1], Middle [2], Medium [3], High [4], Quiet [5]
@@ -215,10 +213,10 @@ These air conditioners support two protocols: Midea and Coolix. Therefore, when
 - **supports_dry** (*Optional*, boolean): Enables setting dry mode for this unit. Defaults to ``false``.
 - **supports_fan_only** (*Optional*, boolean): Enables setting fan only mode for this unit. Confirm that mode is supported on your remote. Defaults to ``false``.
 
-- **horizontal_default** (*Optional*, string): What to default to when the AC unit's horizontal direction is *not* set to swing. Defaults to ``middle``. 
+- **horizontal_default** (*Optional*, string): What to default to when the AC unit's horizontal direction is *not* set to swing. Defaults to ``middle``.
 
   - Options are: ``left``, ``middle-left``, ``middle``, ``middle-right``, ``right``, ``auto``
-- **vertical_default** (*Optional*, string): What to default to when the AC unit's vertical direction is *not* set to swing. Defaults to ``middle``. 
+- **vertical_default** (*Optional*, string): What to default to when the AC unit's vertical direction is *not* set to swing. Defaults to ``middle``.
 
   - Options are: ``down``, ``middle-down``, ``middle``, ``middle-up``, ``up``, ``auto``
 
@@ -339,13 +337,13 @@ Arduino-HeatpumpIR
 
 The ``heatpumpir`` platform supports dozens of manufacturers and hundreds of AC units by utilising the `Arduino-HeatpumpIR library <https://github.com/ToniA/arduino-heatpumpir>`__.
 
-This platform compiles only under ``arduino`` framework or LibreTiny, and should only be used if your AC unit is not supported by any of the other (native) platforms from above. No support can be provided for Arduino-HeatpumpIR, because it is a third party library. 
+This platform compiles only under ``arduino`` framework or LibreTiny, and should only be used if your AC unit is not supported by any of the other (native) platforms from above. No support can be provided for Arduino-HeatpumpIR, because it is a third party library.
 
 This platform utilises the library's generic one-size-fits-all API, which might not line up perfectly with all of the supported AC units. For example, some AC units have more fan speed options than what the generic API supports.
 
 Additional configuration must be specified for this platform:
 
-- **protocol** (**Required**, string): Choose one of Arduino-HeatpumpIR's supported protcols: 
+- **protocol** (**Required**, string): Choose one of Arduino-HeatpumpIR's supported protcols:
     ``airway``, ``aux``, ``ballu``, ``bgh_aud``, ``carrier_mca``, ``carrier_nqv``, ``carrier_qlima_1``, ``carrier_qlima_1``, ``daikin``,
     ``daikin_arc417``, ``daikin_arc480``, ``electroluxyal``, ``fuego``, ``fujitsu_awyz``, ``gree``, ``greeyaa``, ``greeyac``, ``greeyan``,
     ``greeyap``, ``greeyt``, ``hisense_aud``, ``hitachi``, ``hyundai``, ``ivt``, ``midea``, ``mitsubishi_fa``, ``mitsubishi_fd``,

components/climate/haier.rst

@@ -111,10 +111,8 @@ This component requires a :ref:`uart` to be setup.
 Configuration variables:
 ------------------------
 
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - **uart_id** (*Optional*, :ref:`config-id`): ID of the UART port to communicate with AC.
 - **protocol** (*Optional*, string): Defines communication protocol with AC. Possible values: ``hon`` or ``smartair2``. The default value is ``smartair2``.
-- **name** (**Required**, string): The name of the climate device.
 - **wifi_signal** (*Optional*, boolean): If ``true`` - send wifi signal level to AC.
 - **answer_timeout** (*Optional*, :ref:`config-time`): Responce timeout. The default value is ``200ms``.
 - **alternative_swing_control** (*Optional*, boolean): (supported by smartAir2 only) If ``true`` - use alternative values to control swing mode. Use only if the original control method is not working for your AC.

components/climate/index.rst

@@ -46,7 +46,8 @@ All climate platforms in ESPHome inherit from the climate configuration schema.
 
 Configuration variables:
 
-- **name** (**Required**, string): The name of the climate device.
+- **id** (*Optional*, string): Manually specify the ID for code generation. At least one of **id** and **name** must be specified.
+- **name** (*Optional*, string): The name of the climate device. At least one of **id** and **name** must be specified.
 
   .. note::
 

components/climate/midea.rst

@@ -67,10 +67,8 @@ The ``midea`` component creates a Midea air conditioner climate device.
 Configuration variables:
 ------------------------
 
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - **uart_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the :doc:`../uart` if you want
   to use multiple UART buses.
-- **name** (**Required**, string): The name of the climate device.
 - **transmitter_id** (*Optional*, :ref:`config-id`): Defined and used automatically when using :doc:`../remote_transmitter` component for IR commands transmit.
 - **period** (*Optional*, :ref:`config-time`): Minimal period between requests to the appliance. Defaults to ``1s``.
 - **timeout** (*Optional*, :ref:`config-time`): Request response timeout until next request attempt. Defaults to ``2s``.
@@ -86,21 +84,15 @@ Configuration variables:
 - **outdoor_temperature** (*Optional*): The information for the outdoor temperature
   sensor.
 
-  - **name** (**Required**, string): The name of the sensor.
+  - All options from :ref:`Sensor <config-sensor>`.
-  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
-  - All other options from :ref:`Sensor <config-sensor>`.
 - **power_usage** (*Optional*): The information for the current power consumption
   sensor.
 
-  - **name** (**Required**, string): The name of the sensor.
+  - All options from :ref:`Sensor <config-sensor>`.
-  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
-  - All other options from :ref:`Sensor <config-sensor>`.
 - **humidity_setpoint** (*Optional*): The information for the humidity indoor
   sensor (experimental).
 
-  - **name** (**Required**, string): The name of the sensor.
+  - All options from :ref:`Sensor <config-sensor>`.
-  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
-  - All other options from :ref:`Sensor <config-sensor>`.
 - All other options from :ref:`Climate <config-climate>`.
 
 Automations

components/climate/pid.rst

@@ -409,7 +409,6 @@ the calculated PID parameters to help finding good PID values.
 
 Configuration variables:
 
-- **name** (**Required**, string): The name of the sensor
 - **type** (**Required**, string): The value to monitor. One of
 
   - ``RESULT`` - The resulting value (sum of P, I, and D terms).
@@ -423,6 +422,8 @@ Configuration variables:
   - ``KI`` - The current factor for the integral term of the PID controller.
   - ``KD`` - The current factor for the differential term of the PID controller.
 
+- All other options from :ref:`Sensor <config-sensor>`.
+
 Advanced options:
 
 - **climate_id** (*Optional*, :ref:`config-id`): The ID of the pid climate to get the values from.

components/climate/tuya.rst

@@ -60,14 +60,12 @@ Based on this, you can create the climate device as follows:
           eco:
             datapoint: 5
             temperature: 28
-        
+
 
 
 Configuration variables:
 ------------------------
 
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-- **name** (**Required**, string): The name of the climate device.
 - **supports_heat** (*Optional*, boolean): Specifies if the device has a heating mode. Defaults to ``true``.
 - **supports_cool** (*Optional*, boolean): Specifies if the device has a cooling mode. Defaults to ``false``.
 - **switch_datapoint** (**Required**, int): The datapoint id number of the climate switch (device on/off).

components/copy.rst

@@ -26,7 +26,6 @@ Configuration variables:
 ************************
 
 - **source_id** (**Required**, :ref:`config-id`): The binary sensor that should be mirrored.
-- **name** (**Required**, string): The name of the binary sensor.
 - All other options from :ref:`Binary Sensor <config-binary_sensor>`.
 
 Copy Button
@@ -44,7 +43,6 @@ Configuration variables:
 ************************
 
 - **source_id** (**Required**, :ref:`config-id`): The button that should be mirrored.
-- **name** (**Required**, string): The name of the button.
 - All other options from :ref:`Button <config-button>`.
 
 Copy Cover
@@ -62,7 +60,6 @@ Configuration variables:
 ************************
 
 - **source_id** (**Required**, :ref:`config-id`): The cover that should be mirrored.
-- **name** (**Required**, string): The name of the cover.
 - All other options from :ref:`Cover <config-cover>`.
 
 Copy Fan
@@ -80,7 +77,6 @@ Configuration variables:
 ************************
 
 - **source_id** (**Required**, :ref:`config-id`): The fan that should be mirrored.
-- **name** (**Required**, string): The name of the fan.
 - All other options from :ref:`Fan <config-fan>`.
 
 Copy Lock
@@ -98,7 +94,6 @@ Configuration variables:
 ************************
 
 - **source_id** (**Required**, :ref:`config-id`): The lock that should be mirrored.
-- **name** (**Required**, string): The name of the lock.
 - All other options from :ref:`Lock <config-lock>`.
 
 Copy Number
@@ -116,7 +111,6 @@ Configuration variables:
 ************************
 
 - **source_id** (**Required**, :ref:`config-id`): The number that should be mirrored.
-- **name** (**Required**, string): The name of the number.
 - All other options from :ref:`Number <config-number>`.
 
 Copy Select
@@ -134,7 +128,6 @@ Configuration variables:
 ************************
 
 - **source_id** (**Required**, :ref:`config-id`): The select that should be mirrored.
-- **name** (**Required**, string): The name of the select.
 - All other options from :ref:`Select <config-select>`.
 
 .. _copy-sensor:
@@ -154,7 +147,6 @@ Configuration variables:
 ************************
 
 - **source_id** (**Required**, :ref:`config-id`): The sensor that should be mirrored.
-- **name** (**Required**, string): The name of the sensor.
 - All other options from :ref:`Sensor <config-sensor>`.
 
 Copy Switch
@@ -172,7 +164,6 @@ Configuration variables:
 ************************
 
 - **source_id** (**Required**, :ref:`config-id`): The switch that should be mirrored.
-- **name** (**Required**, string): The name of the switch.
 - All other options from :ref:`Switch <config-switch>`.
 
 Copy Text Sensor
@@ -190,7 +181,6 @@ Configuration variables:
 ************************
 
 - **source_id** (**Required**, :ref:`config-id`): The text sensor that should be mirrored.
-- **name** (**Required**, string): The name of the text sensor.
 - All other options from :ref:`Text Sensor <config-text_sensor>`.
 
 Copy Text
@@ -208,7 +198,6 @@ Configuration variables:
 ************************
 
 - **source_id** (**Required**, :ref:`config-id`): The text that should be mirrored.
-- **name** (**Required**, string): The name of the number.
 - All other options from :ref:`Text <config-text>`.
 
 See Also

components/cover/am43.rst

@@ -53,13 +53,11 @@ To make use of the battery and light level sensors, see the
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the cover.
 - **ble_client_id** (**Required**, :ref:`config-id`): The id of the ``ble_client`` entry associated with the device.
 - **pin** (*Optional*, int): The pin for the device, as
   set in the app. The default is usually printed on the
   device. Defaults to ``8888``.
 - **invert_position** (*Optional*, boolean): Inverts the position value to and from the device. Set if ESPHome is swapping around the open/close state of the cover.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Cover <config-cover>`.
 
 

components/cover/current_based.rst

@@ -62,7 +62,6 @@ operation circuit (typically caused by welded relays).
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the cover.
 - **open_sensor** (**Required**, :ref:`config-id`): The open current sensor.
 - **open_action** (**Required**, :ref:`Action <config-action>`): The action that should
   be performed when the remote requests the cover to be opened.
@@ -95,7 +94,6 @@ Configuration variables:
 - **malfunction_action** (*Optional*, :ref:`Action <config-action>`): The action that should
   be performed when relay malfunction is detected. Malfunction may require device servicing. You can use this action
   to notify other systems about this situation
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Cover <config-cover>`.
 
 Use with Shelly 2.5

components/cover/endstop.rst

@@ -47,7 +47,6 @@ current position of the cover.
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the cover.
 - **open_action** (**Required**, :ref:`Action <config-action>`): The action that should
   be performed when the remote requests the cover to be opened.
 - **open_duration** (**Required**, :ref:`config-time`): The amount of time it takes the cover
@@ -66,7 +65,6 @@ Configuration variables:
   be performed when the remote requests the cover to be closed or an endstop is reached.
 - **max_duration** (*Optional*, :ref:`config-time`): The maximum duration the cover should be opening
   or closing. Useful for protecting from dysfunctional endstops.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Cover <config-cover>`.
 
 See Also

components/cover/feedback.rst

@@ -4,8 +4,8 @@ Feedback Cover
 .. seo::
     :description: Instructions for setting up feedback covers in ESPHome.
 
-The ``feedback`` cover platform allows you to create covers with position control that 
+The ``feedback`` cover platform allows you to create covers with position control that
-can optionally have feedback from sensors to detect the fully-open and fully-closed states (endstops), 
+can optionally have feedback from sensors to detect the fully-open and fully-closed states (endstops),
 and from sensors to detect actual movement (opening/closing). In all the cases the current
 position is approximated with the time the cover has been moving in a direction.
 
@@ -54,11 +54,11 @@ Endstop Sensors
 ***************
 
 For cases where there are endstops at one or both ends of the cover to detect the fully-open and fully-closed states.
-When any of these endstops are reached, an actual state is read and updated and the cover optionally 
+When any of these endstops are reached, an actual state is read and updated and the cover optionally
 stopped (via ``stop_action``). The state is not assumed.
 
 The extension also handles the case where the cover has builtin endstops, which stops the movement, independently to
-the component's logic. In this case, when the cover is fully closed (either if timed based or sensor based) the 
+the component's logic. In this case, when the cover is fully closed (either if timed based or sensor based) the
 ``stop_action`` is not triggered.
 
 It is a drop-in replacement of :doc:`/components/cover/endstop`.
@@ -71,9 +71,9 @@ as soon as an action is triggered) and can also react to commands issued to cove
 keep states in sync (useful for "smartization" of an existing cover).
 
 When there are no specific endstop sensors, and if the cover has builtin endstops and no external control logic,
-these movement sensors can optionally be use to infer the endstop state. 
+these movement sensors can optionally be use to infer the endstop state.
 When the movement stops (with no stop action being requested) it is assumed that it was caused by
-the builtin endstops, and so the close/open state (according to current direction) was reached. 
+the builtin endstops, and so the close/open state (according to current direction) was reached.
 This function is activated setting ``infer_endstop`` to True.
 
 It can be used to replace a :doc:`/components/cover/current_based`, with some modifications in the yaml. See :ref:`migrating_current_based`
@@ -85,16 +85,13 @@ To protect the cover hardware from damage, some safety options are available:
 
 - *Max duration*, to protect from faulty endstops
 - *Direction change wait time*, like an interlock wait time, to protect motors from sudden direction changes
-- *Obstacle sensors* and *rollback*, possibility to stop and optionally rollback the cover when some external sensors detects an obstacle 
+- *Obstacle sensors* and *rollback*, possibility to stop and optionally rollback the cover when some external sensors detects an obstacle
   (it might be a sensor for high current consumption or an infrared light detecting an obstruction in the path).
 
 
 Configuration variables
 -----------------------
 
-- **name** (**Required**, string): The name of the cover.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-
 - **stop_action** (**Required**, :ref:`Action <config-action>`): The action that should
   be performed when the remote requests the cover to be closed or an endstop is reached.
 
@@ -132,23 +129,23 @@ Additional options:
   detectors. In this configuration the ``stop_action`` is not performed when the open or close
   time is completed and if the cover is commanded to open or close the corresponding actions
   will be performed without checking current state. Defaults to ``false``.
-- **infer_endstop_from_movement** (*Optional*, boolean): Whether to infer endstop state from the movement sensor. 
+- **infer_endstop_from_movement** (*Optional*, boolean): Whether to infer endstop state from the movement sensor.
   Requires movement sensors to be set, no endstop sensors and to have builtin endstops. Defaults to ``false``.
 - **assumed_state** (*Optional*, boolean): Whether the true state of the cover is not known.
   This will make the Home Assistant frontend show buttons for both OPEN and CLOSE actions, instead
   of hiding or disabling one of them. Defaults to ``true`` if no sensor is available to known
   the actual state of the cover.
 - **max_duration** (*Optional*, :ref:`config-time`): The maximum duration the cover should be opening
-  or closing. Useful for protecting from dysfunctional endstops. 
+  or closing. Useful for protecting from dysfunctional endstops.
   Requires internal, builtin or inferred endstops.
 - **direction_change_wait_time** (*Optional*, :ref:`config-time`): Stops cover and forces a wait time between changes in direction,
-  and takes it into account when computing cover position (useful to protect motors). 
+  and takes it into account when computing cover position (useful to protect motors).
   When this option is set (even at 0s) if an open/close action is invoked while the cover is moving in the opposite direction,
-  then and intermediate stop action will be invoked to generate the delay. 
+  then and intermediate stop action will be invoked to generate the delay.
-- **acceleration_wait_time** (*Optional*, :ref:`config-time`): Considers a wait time needed by the cover to actually 
+- **acceleration_wait_time** (*Optional*, :ref:`config-time`): Considers a wait time needed by the cover to actually
-  start moving after command is issued and takes it into account when computing cover position 
+  start moving after command is issued and takes it into account when computing cover position
-  (useful for heavy covers with large inertia). 
+  (useful for heavy covers with large inertia).
-  Intended to not accumulate error when doing multiple partial open/close actions). 
+  Intended to not accumulate error when doing multiple partial open/close actions).
   The open/close duration includes one instance of this delay, as it is the total amount of time from
   issuing a command to reaching endstop.
   Defaults to ``0s``.
@@ -175,13 +172,13 @@ Most options can be left untouched, but some modifications are needed:
 
    If there where any open/close obstacle current threshold defined, a separate binary sensor with that threshold should be defined.
    The option ``start_sensing_delay`` should be directly replaced by a ``delayed_off`` filter in the movement sensors, or alternatively
-   hysteresis options could be used to reduce the noise.  
+   hysteresis options could be used to reduce the noise.
 2. To have the very same behavior implicit in current based cover, you must always set ``has_built_in_endstop`` and ``infer_endstop_from_movement``
    to True.
 
   .. code-block:: yaml
 
-      # Example original sensor configuration 
+      # Example original sensor configuration
       cover:
         - platform: current_based
           name: "Current Based Cover"
@@ -192,7 +189,7 @@ Most options can be left untouched, but some modifications are needed:
           start_sensing_delay: 0.8s
           # ...rest of options
 
-      # Example converted sensor configuration 
+      # Example converted sensor configuration
       binary_sensor:
         - platform: analog_threshold
           id: open_binary_sensor
@@ -216,43 +213,43 @@ Most options can be left untouched, but some modifications are needed:
           open_obstacle_sensor: open_obstacle_binary_sensor
           #... rest of options
 
-3. Malfunction detection is not directly supported by Feedback Cover, as the malfunction was very narrowly defined to a specific use case 
+3. Malfunction detection is not directly supported by Feedback Cover, as the malfunction was very narrowly defined to a specific use case
-   (while in other hardware configurations, the same situation is perfectly valid). 
+   (while in other hardware configurations, the same situation is perfectly valid).
 
    The malfunction alerted specifically when there was current in the opposite direction of the requested operation (possibly due to a relay welded).
    This detection can still be achieved by putting the logic directly in the switch, (or whatever needed according to your specific use case).
 
   .. code-block:: yaml
 
-      # Example original malfunction configuration 
+      # Example original malfunction configuration
       cover:
         - platform: current_based
-          close_sensor: close_current        
+          close_sensor: close_current
           close_action:
             - switch.turn_on: open_relay
-          open_sensor: open_current 
+          open_sensor: open_current
           open_action:
-            - switch.turn_on: open_relay 
+            - switch.turn_on: open_relay
-             
+
           malfunction_detection: true
           malfunction_action:
-            - logger.log: "Malfunction detected. Relay welded."   
+            - logger.log: "Malfunction detected. Relay welded."
-          #... rest of options 
+          #... rest of options
 
-      # Example converted malfunction configuration 
+      # Example converted malfunction configuration
       switch:
         - platform: gpio
           id: open_relay
-          #... rest of options 
+          #... rest of options
           on_turn_off:
             - delay: 200ms #allow for switching time and any discharge
             - if:
-                condition: 
+                condition:
                   binary_sensor.is_on: open_binary_sensor
-                  # alternative can check directly  
+                  # alternative can check directly
                   # on sensor.in_range open_current
                 then:
-                  - logger.log: "Malfunction detected. Relay welded."   
+                  - logger.log: "Malfunction detected. Relay welded."
 
 
 

components/cover/index.rst

@@ -28,7 +28,8 @@ All cover config schemas inherit from this schema - you can set these keys for c
 
 Configuration variables:
 
-- **name** (**Required**, string): The name for the cover.
+- **id** (*Optional*, string): Manually specify the ID for code generation. At least one of **id** and **name** must be specified.
+- **name** (*Optional*, string): The name for the cover. At least one of **id** and **name** must be specified.
 
   .. note::
 

components/cover/template.rst

@@ -43,7 +43,6 @@ Possible return values for the optional lambda:
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the cover.
 - **lambda** (*Optional*, :ref:`lambda <config-lambda>`):
   Lambda to be evaluated repeatedly to get the current state of the cover.
 - **open_action** (*Optional*, :ref:`Action <config-action>`): The action that should
@@ -71,7 +70,6 @@ Configuration variables:
   be performed when the remote (like Home Assistant's frontend) requests the cover be set to a specific
   position. The desired position is available in the lambda in the ``pos`` variable.
   Useless if `has_position` is not set to ``true``.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Cover <config-cover>`.
 
 .. _cover-template-publish_action:

components/cover/time_based.rst

@@ -37,7 +37,6 @@ of the cover can be restored at node reboot.
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the cover.
 - **open_action** (**Required**, :ref:`Action <config-action>`): The action that should
   be performed when the remote requests the cover to be opened.
 - **open_duration** (**Required**, :ref:`config-time`): The amount of time it takes the cover
@@ -53,17 +52,16 @@ Configuration variables:
   detectors. In this configuration the ``stop_action`` is not performed when the open or close
   time is completed and if the cover is commanded to open or close the corresponding actions
   will be performed without checking current state. Defaults to ``false``.
-- **manual_control** (*Optional*, boolean): For covers with manual external controls. With this 
+- **manual_control** (*Optional*, boolean): For covers with manual external controls. With this
-  configuration if the cover is commanded to open or close the corresponding actions will be 
+  configuration if the cover is commanded to open or close the corresponding actions will be
-  performed even if the current state fully open or fully closed matches desired state, then 
+  performed even if the current state fully open or fully closed matches desired state, then
-  ``stop_action`` will be called after the full duration of the action elapses. 
+  ``stop_action`` will be called after the full duration of the action elapses.
   The current state will then be relearned upon completion.
-  It's recommended to  set ``assumed_state`` to true so the cover control button aren't disabled 
+  It's recommended to  set ``assumed_state`` to true so the cover control button aren't disabled
-  in the interface. Defaults to ``false``. 
+  in the interface. Defaults to ``false``.
 - **assumed_state** (*Optional*, boolean): Whether the true state of the cover is not known.
   This will make the Home Assistant frontend show buttons for both OPEN and CLOSE actions, instead
   of hiding or disabling one of them. Defaults to ``true``.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Cover <config-cover>`.
 
 
@@ -79,7 +77,7 @@ This can be handled at the **stop_action** by using the following lambda functio
 
 .. code-block:: yaml
 
-    stop_action: 
+    stop_action:
       - lambda: !lambda |-
           if (id(cover).get_last_operation() == CoverOperation::COVER_OPERATION_OPENING) {
             // Cover is currently opening
@@ -89,7 +87,7 @@ This can be handled at the **stop_action** by using the following lambda functio
             id(cover_button_up).press();
           }
 
-Be aware that ``get_last_operation`` will only return the last opening or closing operation, but not the last idle operation. 
+Be aware that ``get_last_operation`` will only return the last opening or closing operation, but not the last idle operation.
 This issue is tracked `here <https://github.com/esphome/issues/issues/4252#issuecomment-2132727377>`_.
 
 See Also

components/cover/tuya.rst

@@ -31,8 +31,6 @@ Now you can create the cover.
 Configuration variables:
 ------------------------
 
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-- **name** (**Required**, string): The name of the cover.
 - **control_datapoint** (*Optional*, int): The datapoint id number for sending control commands.
 - **position_datapoint** (**Required**, int): The datapoint id number of the cover position value.
 - **position_report_datapoint** (*Optional*, int): The datapoint id number of the cover position report value, if separate from position_datapoint.

components/datetime/index.rst

@@ -29,7 +29,8 @@ All datetime in ESPHome have a name and an optional icon.
 
 Configuration variables:
 
-- **name** (**Required**, string): The name for the datetime.
+- **id** (*Optional*, string): Manually specify the ID for code generation. At least one of **id** and **name** must be specified.
+- **name** (*Optional*, string): The name for the datetime. At least one of **id** and **name** must be specified.
 
   .. note::
 

components/event/index.rst

@@ -48,8 +48,8 @@ Configuration variables:
 
 One of ``id`` or ``name`` is required.
 
-- **id** (**Required**, :ref:`config-id`): Manually specify the ID used for code generation, allowing for further customization or interaction with this event within ESPHome scripts or lambda functions.
+- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation. At least one of **id** and **name** must be specified.
-- **name** (**Required**, string): The name for the event.
+- **name** (*Optional*, string): The name for the event. At least one of **id** and **name** must be specified.
 
   .. note::
 

components/fan/binary.rst

@@ -27,13 +27,10 @@ Configuration variables:
 
 - **output** (**Required**, :ref:`config-id`): The id of the
   binary output component to use for this fan.
-- **name** (**Required**, string): The name for this fan.
 - **oscillation_output** (*Optional*, :ref:`config-id`): The id of the
   :ref:`output <output>` to use for the oscillation state of this fan. Default is empty.
 - **direction_output** (*Optional*, :ref:`config-id`): The id of the
   :ref:`output <output>` to use for the direction state of the fan. Default is empty.
-- **id** (*Optional*, :ref:`config-id`): Manually specify
-  the ID used for code generation.
 - All other options from :ref:`Fan Component <config-fan>`.
 
 See Also

components/fan/hbridge.rst

@@ -46,8 +46,6 @@ Configuration variables:
 - **speed_count** (*Optional*, int): Set the number of supported discrete speed levels. The value is used
   to calculate the percentages for each speed. E.g. ``2`` means that you have 50% and 100% while ``100``
   will allow 1% increments in the output. Defaults to ``100``.
-- **name** (**Required**, string): The name for this fan.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - **preset_modes** (*Optional*): A list of preset modes for this fan. Preset modes can be used in automations (i.e. `on_preset_set`).
 - All other options from :ref:`Fan Component <config-fan>`.
 

components/fan/index.rst

@@ -26,7 +26,8 @@ Base Fan Configuration
 
 Configuration variables:
 
-- **name** (**Required**, string): The name of the fan.
+- **id** (*Optional*, string): Manually specify the ID for code generation. At least one of **id** and **name** must be specified.
+- **name** (*Optional*, string): The name of the fan. At least one of **id** and **name** must be specified.
 
   .. note::
 

components/fan/speed.rst

@@ -23,7 +23,6 @@ supports speed settings.
 Configuration variables:
 ------------------------
 
-- **name** (*Optional*, string): The name for this fan.
 - **output** (**Required**, :ref:`config-id`): The id of the :ref:`float output <output>` to use for this fan.
 - **oscillation_output** (*Optional*, :ref:`config-id`): The id of the
   :ref:`output <output>` to use for the oscillation state of this fan. Default is empty.
@@ -32,7 +31,6 @@ Configuration variables:
 - **speed_count** (*Optional*, int): Set the number of supported discrete speed levels. The value is used
   to calculate the percentages for each speed. E.g. ``2`` means that you have 50% and 100% while ``100``
   will allow 1% increments in the output. Defaults to ``100``.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - **preset_modes** (*Optional*): A list of preset modes for this fan. Preset modes can be used in automations (i.e. `on_preset_set`).
 - All other options from :ref:`Fan Component <config-fan>`.
 

components/fan/template.rst

@@ -25,8 +25,6 @@ The ``template`` fan platform lets you create a fan interface using only trigger
 Configuration variables:
 ------------------------
 
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-- **name** (*Optional*, string): The name for this fan.
 - **has_direction** (*Optional*, boolean): Indicates if there should be a control for direction.  Default is ``false``.
 - **has_oscillating** (*Optional*, boolean): Indicates if there should be a control for oscillating.  Default is ``false``.
 - **speed_count** (*Optional*, int): Set the number of supported discrete speed levels.  Default is only on/off.

components/fan/tuya.rst

@@ -49,8 +49,6 @@ Based on this, you can create the fan as follows:
 Configuration variables:
 ------------------------
 
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-- **name** (**Required**, string): The name of the fan.
 - **speed_datapoint** (**Required**, int): The datapoint id number of the fan speed.
 - **switch_datapoint** (**Required**, int): The datapoint id number of the fan switch.
 - **oscillation_datapoint** (*Optional*, int): The datapoint id number of the oscillation

components/fingerprint_grow.rst

@@ -83,9 +83,7 @@ Binary Sensor
 
 Configuration variables:
 
-- **name** (**Required**, string): The name for the enrolling binary sensor.
+- All options from :ref:`Binary Sensor <config-binary_sensor>`.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-- All other options from :ref:`Binary Sensor <config-binary_sensor>`.
 
 
 Sensor

components/gps.rst

@@ -49,39 +49,27 @@ Configuration variables:
 ------------------------
 - **latitude** (*Optional*): Include the Latitude as a sensor
 
-  - **name** (**Required**, string): The name to give the latitude sensor
+  - All options from :ref:`Sensor <config-sensor>`.
-  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
-  - All other options from :ref:`Sensor <config-sensor>`.
 
 - **longitude** (*Optional*): Include the Longitude as a sensor
 
-  - **name** (**Required**, string): The name to give the longitude sensor
+  - All options from :ref:`Sensor <config-sensor>`.
-  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
-  - All other options from :ref:`Sensor <config-sensor>`.
 
 - **speed** (*Optional*): Include the measured speed as a sensor
 
-  - **name** (**Required**, string): The name to give the speed sensor
+  - All options from :ref:`Sensor <config-sensor>`.
-  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
-  - All other options from :ref:`Sensor <config-sensor>`.
 
 - **course** (*Optional*): Include the measured course as a sensor
 
-  - **name** (**Required**, string): The name to give the course sensor
+  - All options from :ref:`Sensor <config-sensor>`.
-  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
-  - All other options from :ref:`Sensor <config-sensor>`.
 
 - **altitude** (*Optional*): Include the measured altitude as a sensor
 
-  - **name** (**Required**, string): The name to give the altitude sensor
+  - All options from :ref:`Sensor <config-sensor>`.
-  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
-  - All other options from :ref:`Sensor <config-sensor>`.
 
 - **satellites** (*Optional*): Include the number of tracking satellites being used as a sensor
 
-  - **name** (**Required**, string): The name to give the tracking satellites sensor
+  - All options from :ref:`Sensor <config-sensor>`.
-  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
-  - All other options from :ref:`Sensor <config-sensor>`.
 
 See Also
 --------

components/light/binary.rst

@@ -24,12 +24,7 @@ The ``binary`` light platform creates a simple ON/OFF-only light from a
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the light.
+- **output** (**Required**, :ref:`config-id`): The id of the binary :ref:`output` to use for this light.
-- **output** (**Required**, :ref:`config-id`): The id of the
-  binary :ref:`output` to use for this light.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-- **effects** (*Optional*, list): A list of :ref:`light effects <light-effects>` to use for this light, though binary lights
-  only support very few of them.
 - All other options from :ref:`Light <config-light>`.
 
 See Also

components/light/color_temperature.rst

@@ -23,7 +23,6 @@ and the other channel controls the brightness.
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the light.
 - **color_temperature** (**Required**, :ref:`config-id`): The id of the float :ref:`output` to use for the color temperature.
 - **brightness** (**Required**, :ref:`config-id`): The id of the float :ref:`output` to use for the brightness.
 - **cold_white_color_temperature** (**Required**, float): The coldest color temperature supported by this light. This
@@ -32,8 +31,6 @@ Configuration variables:
 - **warm_white_color_temperature** (**Required**, float): The warmest color temperature supported by this light. This
   is the highest value when expressed in `mireds <https://en.wikipedia.org/wiki/Mired>`__, or the lowest value when
   expressed in Kelvin.
-- **effects** (*Optional*, list): A list of :ref:`light effects <light-effects>` to use for this light.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Light <config-light>`.
 
 See Also

components/light/cwww.rst

@@ -36,7 +36,6 @@ calculation assumes that both lights have the same illuminance, which might not
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the light.
 - **cold_white** (**Required**, :ref:`config-id`): The id of the float :ref:`output` to use for the cold white channel.
 - **warm_white** (**Required**, :ref:`config-id`): The id of the float :ref:`output` to use for the warm white channel.
 - **cold_white_color_temperature** (*Optional*, float): The color temperature (in `mireds <https://en.wikipedia.org/wiki/Mired>`__ or Kelvin)
@@ -44,8 +43,6 @@ Configuration variables:
 - **warm_white_color_temperature** (*Optional*, float): The color temperature (in `mireds <https://en.wikipedia.org/wiki/Mired>`__ or Kelvin)
   of the warm white channel. Note that this option is required to control the mixing from Home Assistant.
 - **constant_brightness** (*Optional*, boolean): When enabled, this will keep the overall brightness of the cold and warm white channels constant by limiting the combined output to 100% of a single channel. This reduces the possible overall brightness but is necessary for some power supplies that are not able to run both channels at full brightness at once. Defaults to ``false``.
-- **effects** (*Optional*, list): A list of :ref:`light effects <light-effects>` to use for this light.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Light <config-light>`.
 
 See Also

components/light/fastled.rst

@@ -55,7 +55,6 @@ Clockless FastLED lights differ from the
 Configuration variables:
 ************************
 
-- **name** (**Required**, string): The name of the light.
 - **chipset** (**Required**, string): Set a chipset to use.
   See :ref:`fastled_clockless-chipsets` for options.
 - **pin** (**Required**, :ref:`config-pin`): The pin for the data line of the FastLED light.
@@ -67,8 +66,6 @@ Configuration variables:
 - **max_refresh_rate** (*Optional*, :ref:`config-time`):
   A time interval used to limit the number of commands a light can handle per second. For example
   16ms will limit the light to a refresh rate of about 60Hz. Defaults to the default value for the used chipset.
-- **effects** (*Optional*, list): A list of :ref:`light effects <light-effects>` to use for this light.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Light <config-light>`.
 
 .. _fastled_clockless-chipsets:
@@ -135,7 +132,6 @@ whereas the clockless lights only need a single pin.
 Configuration variables:
 ************************
 
-- **name** (**Required**, string): The name of the light.
 - **chipset** (**Required**, string): Set a chipset to use. See :ref:`fastled_spi-chipsets` for options.
 - **data_pin** (**Required**, :ref:`config-pin`): The pin for the data line of the FastLED light.
 - **clock_pin** (**Required**, :ref:`config-pin`): The pin for the clock line of the FastLED light.
@@ -150,7 +146,6 @@ Configuration variables:
 - **data_rate** (*Optional*, frequency): The data rate to use for shifting data to the light. Can help if you
   have long cables or slow level-shifters.
 - **effects** (*Optional*, list): A list of :ref:`light effects <light-effects>` to use for this light.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Light <config-light>`.
 
 .. _fastled_spi-chipsets:

components/light/hbridge.rst

@@ -34,8 +34,6 @@ control the colors in the :ref:`light control actions <light-turn_on_action>`, y
 Configuration variables:
 ------------------------
 
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-- **name** (**Required**, string): The name of the light.
 - **pin_a** (**Required**, :ref:`config-id`): The id of the first float :ref:`output` to use for this light.
 - **pin_b** (**Required**, :ref:`config-id`): The id of the second float :ref:`output` to use for this light.
 - All other options from :ref:`Light <config-light>`.

components/light/index.rst

@@ -26,7 +26,8 @@ All light configuration schemas inherit these options.
 
 Configuration variables:
 
-- **name** (**Required**, string): The name of the light.
+- **id** (*Optional*, string): Manually specify the ID for code generation. At least one of **id** and **name** must be specified.
+- **name** (*Optional*, string): The name of the light. At least one of **id** and **name** must be specified.
 
   .. note::
 

components/light/monochromatic.rst

@@ -30,10 +30,7 @@ The ``monochromatic`` light platform creates a simple brightness-only light from
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the light.
 - **output** (**Required**, :ref:`config-id`): The id of the float :ref:`output` to use for this light.
-- **effects** (*Optional*, list): A list of :ref:`light effects <light-effects>` to use for this light.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Light <config-light>`.
 
 See Also

components/light/neopixelbus.rst

@@ -37,10 +37,7 @@ Configuration variables:
 
 **Base Options:**
 
-- **name** (**Required**, string): The name of the light.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - **num_leds** (**Required**, int): The number of LEDs attached.
-- **effects** (*Optional*, list): A list of :ref:`light effects <light-effects>` to use for this light.
 
 **Type Options:**
 
@@ -87,8 +84,6 @@ If you have one line, only specify ``pin``, otherwise specify both ``clock_pin``
 - **clock_pin** (**Required**, :ref:`config-pin`): The pin for the clock line of the light, for two-wire lights.
 - **data_pin** (**Required**, :ref:`config-pin`): The pin for the data line of the light, for two-wire lights.
 
-**Advanced Options:**
-
 - All other options from :ref:`Light <config-light>`.
 
 .. warning::

components/light/partition.rst

@@ -90,9 +90,8 @@ Joining multiple LED lights into one
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the light.
 - **segments** (**Required**, list): A list of segments included in this partition.
-  
+
   *For addressable segments:*
 
   - **id** (**Required**, :ref:`config-id`): The ID of the addressable light to be controlled by this segment.
@@ -106,9 +105,6 @@ Configuration variables:
   - **single_light_id** (**Required**, :ref:`config-id`): The ID of a single addressable or non-addressable light.
     If an addressable light is specified, it will be treated as a single light in the partition.
 
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-- **effects** (*Optional*, list): A list of :ref:`light effects <light-effects>` to use for this light.
-
 - All other options from :ref:`Light <config-light>`.
 
 .. note::

components/light/rgb.rst

@@ -60,12 +60,9 @@ perceived intensity of different colors will generally vary. This can be done by
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the light.
 - **red** (**Required**, :ref:`config-id`): The id of the float :ref:`output` to use for the red channel.
 - **green** (**Required**, :ref:`config-id`): The id of the float :ref:`output` to use for the green channel.
 - **blue** (**Required**, :ref:`config-id`): The id of the float :ref:`output` to use for the blue channel.
-- **effects** (*Optional*, list): A list of :ref:`light effects <light-effects>` to use for this light.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Light <config-light>`.
 
 See Also

components/light/rgbct.rst

@@ -25,7 +25,6 @@ light from 5 :ref:`float output components <output>` (one for each channel).
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the light.
 - **red** (**Required**, :ref:`config-id`): The id of the float :ref:`output` to use for the red channel.
 - **green** (**Required**, :ref:`config-id`): The id of the float :ref:`output` to use for the green channel.
 - **blue** (**Required**, :ref:`config-id`): The id of the float :ref:`output` to use for the blue channel.
@@ -41,8 +40,6 @@ Configuration variables:
   expressed in Kelvin.
 - **color_interlock** (*Optional*, boolean): When enabled, this will prevent white leds being on at the same
   time as RGB leds. See :ref:`rgbw_color_interlock` for more information. Defaults to ``false``.
-- **effects** (*Optional*, list): A list of :ref:`light effects <light-effects>` to use for this light.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Light <config-light>`.
 
 See Also

components/light/rgbw.rst

@@ -64,15 +64,12 @@ the ``color_mode`` option of the :ref:`light control actions <light-turn_on_acti
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the light.
 - **red** (**Required**, :ref:`config-id`): The id of the float :ref:`output` to use for the red channel.
 - **green** (**Required**, :ref:`config-id`): The id of the float :ref:`output` to use for the green channel.
 - **blue** (**Required**, :ref:`config-id`): The id of the float :ref:`output` to use for the blue channel.
 - **white** (**Required**, :ref:`config-id`): The id of the float :ref:`output` to use for the white channel.
-- **effects** (*Optional*, list): A list of :ref:`light effects <light-effects>` to use for this light.
 - **color_interlock** (*Optional*, boolean): When enabled, this will prevent white leds being on at the same
   time as RGB leds. See :ref:`rgbw_color_interlock` for more information. Defaults to ``false``.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Light <config-light>`.
 
 See Also

components/light/rgbww.rst

@@ -69,7 +69,6 @@ the ``color_mode`` option of the :ref:`light control actions <light-turn_on_acti
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the light.
 - **red** (**Required**, :ref:`config-id`): The id of the float :ref:`output` to use for the red channel.
 - **green** (**Required**, :ref:`config-id`): The id of the float :ref:`output` to use for the green channel.
 - **blue** (**Required**, :ref:`config-id`): The id of the float :ref:`output` to use for the blue channel.
@@ -89,8 +88,6 @@ Configuration variables:
   both channels at full brightness at once. Defaults to ``false``.
 - **color_interlock** (*Optional*, boolean): When enabled, this will prevent white leds being on at the same
   time as RGB leds. See :ref:`rgbw_color_interlock` for more information. Defaults to ``false``.
-- **effects** (*Optional*, list): A list of :ref:`light effects <light-effects>` to use for this light.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Light <config-light>`.
 
 See Also

components/light/shelly_dimmer.rst

@@ -10,7 +10,6 @@ A detailed analysis of the Shelly Dimmer 2 hardware is given `here <https://gith
 
 Warning!!! At the time of writing there seems to be no way to revert back to the "stock firmware", because there seems to be no way to revert to firmware of the STM32 co-processor.
 
-The 
 
 .. figure:: ../../images/shellydimmer2.jpg
     :align: center
@@ -49,7 +48,6 @@ An example of a configuration of this component:
 Configuration variables:
 ------------------------
 
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - **uart_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the UART hub.
 
 .. note::
@@ -64,7 +62,6 @@ Configuration variables:
             baud_rate: 115200
 
 
-- **name** (**Required**, string): The name of the light.
 - **leading_edge** (*Optional*, boolean): `Dimming mode <https://en.wikipedia.org/wiki/Dimmer#Solid-state_dimmer>`_: ``true`` means leading edge, ``false`` is trailing edge. Defaults to ``false``.
 - **min_brightness** (*Optional*, int): Minimum brightness value on a scale from 0..1000, the default is 0.
 - **max_brightness** (*Optional*, int): Maximum brightness value on a scale from 0..1000, the default is 1000.
@@ -91,7 +88,7 @@ Configuration variables:
         firmware:
           version: "51.6" #<-- set version here
           update: true
-    
+
     There is no action required by the user to flash the STM32. There is no way to revert to stock firmware on the STM32 at the time of writing.
 
 - All other options from :ref:`Light <config-light>`.

components/light/sonoff_d1.rst

@@ -94,8 +94,6 @@ This component is useless for devices other than Sonoff D1 dimmer.
 Configuration variables:
 ------------------------
 
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-- **name** (**Required**, string): The name of the light.
 - **use_rm433_remote** (*Optional*, boolean): Set to ``True`` if your setup uses Sonoff RM433
   or any other radio remote control. Properly setting this parameter allows the platform to
   identify what to do with incoming UART commands. RF chip is known to catch random commands

components/light/spi_led_strip.rst

@@ -35,10 +35,7 @@ perceived intensity of different colors will generally vary. This can be done by
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the light.
 - **num_leds** (*Optional*, int): The number of LEDs attached. The default is 1.
-- **effects** (*Optional*, list): A list of :ref:`light effects <light-effects>` to use for this light.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - **data_rate** (*Optional*): Set the data rate of the SPI interface to the display. One of ``80MHz``, ``40MHz``, ``20MHz``, ``10MHz``, ``5MHz``, ``2MHz``, ``1MHz`` (default), ``200kHz``, ``75kHz`` or ``1kHz``.
 - All other options from :ref:`Light <config-light>`.
 

components/light/status_led.rst

@@ -34,12 +34,8 @@ When the device is in OK state, the LED will be restored to the state of the ``b
 Configuration variables:
 ------------------------
 
-- **name** (*Optional*, string): The name of the light.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - **pin** (*Optional*, :ref:`Pin Schema <config-pin_schema>`): The GPIO pin to operate the LED on.
 - **output** (*Optional*, :ref:`config-id`): The id of the binary :ref:`output` to use for this light.
-- **effects** (*Optional*, list): A list of :ref:`light effects <light-effects>` to use for this light, though binary lights
-  only support very few of them.
 - All other options from :ref:`Light <config-light>`.
 
 .. note::

components/light/tuya.rst

@@ -42,8 +42,6 @@ Now you can create the light.
 Configuration variables:
 ------------------------
 
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-- **name** (**Required**, string): The name of the light.
 - **dimmer_datapoint** (*Optional*, int): The datapoint id number of the dimmer value.
 - **min_value_datapoint** (*Optional*, int): The datapoint id number of the MCU minimum value
   setting.  If this is set then ESPHome will sync the **min_value** to the MCU on startup.

components/lock/index.rst

@@ -21,7 +21,8 @@ Base Lock Configuration
 
 Configuration variables:
 
-- **name** (**Required**, string): The name of the lock.
+- **id** (*Optional*, string): Manually specify the ID for code generation. At least one of **id** and **name** must be specified.
+- **name** (*Optional*, string): The name of the lock. At least one of **id** and **name** must be specified.
 
   .. note::
 

components/lock/output.rst

@@ -27,8 +27,6 @@ Configuration variables:
 ------------------------
 
 - **output** (**Required**, :ref:`config-id`): The ID of the output component to use.
-- **name** (**Required**, string): The name for the lock.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Lock <config-lock>`.
 
 See Also

components/lock/template.rst

@@ -45,7 +45,6 @@ Possible return values for the optional lambda:
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the lock.
 - **lambda** (*Optional*, :ref:`lambda <config-lambda>`):
   Lambda to be evaluated repeatedly to get the current state of the lock.
 - **lock_action** (*Optional*, :ref:`Action <config-action>`): The action that should
@@ -58,7 +57,6 @@ Configuration variables:
 - **assumed_state** (*Optional*, boolean): Whether the true state of the lock is not known.
   This will make the Home Assistant frontend show buttons for both LOCK and UNLOCK actions, instead
   of hiding one of them when the lock is LOCKED/UNLOCKED. Defaults to ``false``.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Lock <config-lock>`.
 
 .. _lock-template-publish_action:

components/media_player/index.rst

@@ -25,7 +25,8 @@ Base Media Player Configuration
 
 Configuration variables:
 
-- **name** (**Required**, string): The name of the media player.
+- **id** (*Optional*, string): Manually specify the ID for code generation. At least one of **id** and **name** must be specified.
+- **name** (*Optional*, string): The name of the media player. At least one of **id** and **name** must be specified.
 
   .. note::
 

components/microphone/i2s_audio.rst

@@ -44,7 +44,7 @@ Configuration variables:
 - **sample_rate** (*Optional*, positive integer): I2S sample rate. Defaults to ``16000``.
 - **bits_per_sample** (*Optional*, enum): The bit depth of the audio samples. Note that while set to ``32bit``, the samples
   will be scaled down to 16bit before being forwarded.
-  One of ``16bit`` or ``32bit``. Defaults to ``16bit``.
+  One of ``16bit`` or ``32bit``. Defaults to ``32bit``.
 - **use_apll** (*Optional*, boolean): I2S using APLL as main I2S clock, enable it to get accurate clock. Defaults to ``false``.
 - **i2s_mode** (*Optional*, enum): The I²S mode to use. One of ``primary`` or ``secondary``. Defaults to ``primary``.
 - **i2s_audio_id** (*Optional*, :ref:`config-id`): The ID of the :ref:`I²S Audio <i2s_audio>` you wish to use for this microphone.

components/number/index.rst

@@ -30,7 +30,8 @@ All numbers in ESPHome have a name and an optional icon.
 
 Configuration variables:
 
-- **name** (**Required**, string): The name for the number.
+- **id** (*Optional*, string): Manually specify the ID for code generation. At least one of **id** and **name** must be specified.
+- **name** (*Optional*, string): The name for the number. At least one of **id** and **name** must be specified.
 
   .. note::
 

components/number/modbus_controller.rst

@@ -10,8 +10,6 @@ When the Number is updated a modbus write command is created sent to the device.
 Configuration variables:
 ------------------------
 
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-- **name** (**Required**, string): The name of the sensor.
 - **address** (**Required**, int): start address of the first register in a range (can be decimal or hexadecimal).
 - **value_type** (**Required**): datatype of the modbus register data. The default data type for modbus is a 16 bit integer in big endian format (MSB first):
 

components/number/template.rst

@@ -22,7 +22,6 @@ using :ref:`lambdas <config-lambda>`.
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the number.
 - **min_value** (**Required**, float): The minimum value this number can be.
 - **max_value** (**Required**, float): The maximum value this number can be.
 - **step** (**Required**, float): The granularity with which the number can be set.
@@ -41,7 +40,6 @@ Configuration variables:
 - **initial_value** (*Optional*, float): The value to set the state to on setup if not
   restored with ``restore_value``.
   Cannot be used with ``lambda``. Defaults to ``min_value``.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Number <config-number>`.
 
 ``number.set`` Action

components/number/tuya.rst

@@ -64,8 +64,6 @@ For instance, assume we have a pH sensor that reads from 0.00 to 15.00 with a sc
 Configuration variables:
 ------------------------
 
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-- **name** (**Required**, string): The name of the switch.
 - **number_datapoint** (**Required**, int): The datapoint id number of the number.
 - **min_value** (**Required**, float): The minimum value this number can be.
 - **max_value** (**Required**, float): The maximum value this number can be.

components/remote_receiver.rst

@@ -234,8 +234,6 @@ then immediately OFF.
 Configuration variables:
 ************************
 
-- **name** (**Required**, string): The name for the binary sensor.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - **receiver_id** (*Optional*, :ref:`config-id`): The remote receiver to receive the
   remote code with. Required if multiple receivers configured.
 - All other options from :ref:`Binary Sensor <config-binary_sensor>`.

components/select/index.rst

@@ -30,7 +30,8 @@ All selects in ESPHome have a name and an optional icon.
 
 Configuration variables:
 
-- **name** (**Required**, string): The name for the select.
+- **id** (*Optional*, string): Manually specify the ID for code generation. At least one of **id** and **name** must be specified.
+- **name** (*Optional*, string): The name for the select. At least one of **id** and **name** must be specified.
 
   .. note::
 

components/select/modbus_controller.rst

@@ -10,7 +10,6 @@ registers.
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the Select.
 - **address** (**Required**, int): The start address of the first or only register
   of the Select  (can be decimal or hexadecimal).
 - **optionsmap** (**Required**, Map[str, int]): Provide a mapping from options (str) of
@@ -38,7 +37,6 @@ Configuration variables:
 - **force_new_range** (*Optional*, boolean): If possible sensors with sequential addresses are
   grouped together and requested in one range. Setting this to ``true`` enforces the start of a new
   range at that address.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - **lambda** (*Optional*, :ref:`lambda <config-lambda>`): Lambda to be evaluated every update interval
   to get the current option of the select.
 
@@ -57,7 +55,7 @@ Configuration variables:
 
 - **write_lambda** (*Optional*, :ref:`lambda <config-lambda>`): Lambda to be evaluated on every update
   of the Sensor, before the new value is written to the modbus registers.
-- **use_write_multiple** (*Optional*, boolean): By default the modbus command *Function Code 6 (Preset Single Registers)* 
+- **use_write_multiple** (*Optional*, boolean): By default the modbus command *Function Code 6 (Preset Single Registers)*
   is used for setting the holding register if only one register is set. If your device only supports *Function Code 16 (Preset Multiple Registers)* set this option to ``true``.
 - **optimistic** (*Optional*, boolean): Whether to operate in optimistic mode - when in this mode,
   any command sent to the Modbus Select will immediately update the reported state. Defaults

components/select/template.rst

@@ -25,7 +25,6 @@ using :ref:`lambdas <config-lambda>`.
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the Select.
 - **options** (**Required**, list): The list of options this Select has.
 - **lambda** (*Optional*, :ref:`lambda <config-lambda>`):
   Lambda to be evaluated every update interval to get the current option of the select.
@@ -42,7 +41,6 @@ Configuration variables:
 - **initial_option** (*Optional*, string): The option to set the option to on setup if not
   restored with ``restore_value``.
   Cannot be used with ``lambda``. Defaults to the first option in the ``options`` list.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Select <config-select>`.
 
 .. note::

components/select/tuya.rst

@@ -49,8 +49,6 @@ Based on this, you can create the select as follows:
 Configuration variables:
 ------------------------
 
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
-- **name** (**Required**, string): The name of the switch.
 - **enum_datapoint** (**Required**, int): The enum datapoint id number for the select.
 - **options** (**Required**, Map[int, str]): Provide a mapping from values (int) of
   this Select to options (str) of the *enum_datapoint* and vice versa. All options and

components/sensor/a01nyub.rst

@@ -6,7 +6,7 @@ A01NYUB Waterproof Ultrasonic Sensor
     :image: a01nyub.jpg
     :keywords: ultrasonic, DFRobot, A01NYUB
 
-This sensor allows you to use A01NYUB waterproof ultrasonic sensor by DFRobot 
+This sensor allows you to use A01NYUB waterproof ultrasonic sensor by DFRobot
 (`datasheet <https://wiki.dfrobot.com/A01NYUB%20Waterproof%20Ultrasonic%20Sensor%20SKU:%20SEN0313>`__)
 with ESPHome to measure distances. This sensor can measure
 ranges between 28 centimeters and 750 centimeters with a resolution of 1 milimeter.
@@ -27,12 +27,11 @@ To use the sensor, first set up an :ref:`uart` with a baud rate of 9600 and conn
     sensor:
       - platform: "a01nyub"
         name: "Distance"
- 
+
 
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the sensor.
 - **uart_id** (*Optional*, :ref:`config-id`): The ID of the :ref:`UART bus <uart>` you wish to use for this sensor.
   Use this if you want to use multiple UART buses at once.
 - All other options from :ref:`Sensor <config-sensor>`.

components/sensor/a02yyuw.rst

@@ -6,7 +6,7 @@ A02YYUW Waterproof Ultrasonic Sensor
     :image: a02yyuw.jpg
     :keywords: ultrasonic, DFRobot, A02YYUW
 
-This sensor allows you to use A02YYUW waterproof ultrasonic sensor by DFRobot 
+This sensor allows you to use A02YYUW waterproof ultrasonic sensor by DFRobot
 (`datasheet <https://wiki.dfrobot.com/_A02YYUW_Waterproof_Ultrasonic_Sensor_SKU_SEN0311>`__)
 with ESPHome to measure distances. This sensor can measure
 ranges between 3 centimeters and 450 centimeters with a resolution of 1 milimeter.
@@ -27,12 +27,11 @@ To use the sensor, first set up an :ref:`uart` with a baud rate of 9600 and conn
     sensor:
       - platform: "a02yyuw"
         name: "Distance"
- 
+
 
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the sensor.
 - **uart_id** (*Optional*, :ref:`config-id`): The ID of the :ref:`UART bus <uart>` you wish to use for this sensor.
   Use this if you want to use multiple UART buses at once.
 - All other options from :ref:`Sensor <config-sensor>`.

components/sensor/absolute_humidity.rst

@@ -30,7 +30,6 @@ See the links at the bottom of the page for details on absolute humidity and the
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name for the absolute humidity sensor.
 - **temperature** (**Required**, :ref:`config-id`): The sensor that is used to measure the current temperature, in °C.
 - **humidity** (**Required**, :ref:`config-id`): The sensor that is used to measure the current relative humidity, in %.
 - **equation** (*Optional*): The saturated vapor pressure equation to use (see below).

components/sensor/adc.rst

@@ -31,14 +31,12 @@ Configuration variables:
 
 - **pin** (**Required**, :ref:`config-pin`): The pin to measure the voltage on.
   Or on the ESP8266 or Raspberry Pi Pico it could alternatively be set to ``VCC``, see :ref:`adc-vcc`.
-- **name** (**Required**, string): The name of the voltage sensor.
 - **attenuation** (*Optional*): Only on ESP32. Specify the ADC
   attenuation to use. See :ref:`adc-esp32_attenuation`. Defaults to ``0db``.
 - **raw** (*Optional*): Allows to read the raw ADC output without any conversion or calibration. See :ref:`adc-raw`. Defaults to ``false``.
 - **samples** (*Optional*): The amount of ADC readings to take per sensor update. On the ESP32 this value is ignored if ``attenuation`` is set to ``auto``. Defaults to ``1``.
 - **update_interval** (*Optional*, :ref:`config-time`): The interval
   to check the sensor. Defaults to ``60s``.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Sensor <config-sensor>`.
 
 .. note::

components/sensor/ads1115.rst

@@ -88,17 +88,16 @@ Configuration variables:
 -  **multiplexer** (**Required**): The multiplexer channel of this sensor. Effectively means between which pins you
    want to measure voltage.
 -  **gain** (**Required**, float): The gain of this sensor.
--  **name** (**Required**, string): The name for this sensor.
 -  **ads1115_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the
    :ref:`ADS1115 Hub <ads1115-component>` you want to use this sensor.
 -  **update_interval** (*Optional*, :ref:`config-time`): The interval
    to check the sensor. Defaults to ``60s``.
--  **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 -  **resolution** (*Optional*, string): the resolution of this sensor. Defaults to ``16 bits``.
 
   - ``16 bits``
   - ``12 bits``
 
+- All other options from :ref:`Sensor <config-sensor>`.
 
 Multiplexer and Gain
 --------------------

components/sensor/aht10.rst

@@ -47,15 +47,11 @@ Configuration variables:
 
 - **temperature** (**Required**): The information for the temperature sensor.
 
-  - **name** (**Required**, string): The name for the temperature sensor.
+  - All options from :ref:`Sensor <config-sensor>`.
-  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
-  - All other options from :ref:`Sensor <config-sensor>`.
 
 - **humidity** (**Required**): The information for the humidity sensor
 
-  - **name** (**Required**, string): The name for the humidity sensor.
+  - All options from :ref:`Sensor <config-sensor>`.
-  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
-  - All other options from :ref:`Sensor <config-sensor>`.
 
 - **update_interval** (*Optional*, :ref:`config-time`): The interval to check the sensor. Defaults to ``60s``.
 

components/sensor/am2320.rst

@@ -40,15 +40,11 @@ Configuration variables:
 
 - **temperature** (**Required**): The information for the temperature sensor.
 
-  - **name** (**Required**, string): The name for the temperature sensor.
+  - All options from :ref:`Sensor <config-sensor>`.
-  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
-  - All other options from :ref:`Sensor <config-sensor>`.
 
 - **humidity** (**Required**): The information for the humidity sensor
 
-  - **name** (**Required**, string): The name for the humidity sensor.
+  - All options from :ref:`Sensor <config-sensor>`.
-  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
-  - All other options from :ref:`Sensor <config-sensor>`.
 
 - **update_interval** (*Optional*, :ref:`config-time`): The interval to check the sensor. Defaults to ``60s``.
 

components/sensor/am43.rst

@@ -45,14 +45,11 @@ Configuration variables:
 - **ble_client_id** (**Required**, :ref:`config-id`): The id of the ``ble_client`` entry associated with the device.
 - **battery_level** (*Optional*): The information for the battery level sensor.
 
-  - **name** (**Required**, string): The name for the battery level sensor.
+  - All options from :ref:`Sensor <config-sensor>`.
-  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
+
-  - All other options from :ref:`Sensor <config-sensor>`.
 - **illuminance** (*Optional*): The information for the light level sensor.
 
-  - **name** (**Required**, string): The name for the light level sensor.
+  - All options from :ref:`Sensor <config-sensor>`.
-  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
-  - All other options from :ref:`Sensor <config-sensor>`.
 
 - **update_interval** (*Optional*, :ref:`config-time`): The interval to check the
   sensor. Defaults to ``60s``.

components/sensor/apds9960.rst

@@ -69,7 +69,6 @@ measurements.
 
 Configuration variables:
 
-- **name** (**Required**, string): The name for the sensor.
 - **type** (**Required**, string): The type of sensor measurement. One of
 
   - ``CLEAR``
@@ -78,7 +77,6 @@ Configuration variables:
   - ``BLUE``
   - ``PROXIMITY``
 
-- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
 - All other options from :ref:`Sensor <config-sensor>`.
 
 Binary Sensor
@@ -89,7 +87,6 @@ measurements.
 
 Configuration variables:
 
-- **name** (**Required**, string): The name for the binary sensor.
 - **direction** (**Required**, string): The direction to measure. One of:
 
   - ``UP``
@@ -97,7 +94,6 @@ Configuration variables:
   - ``LEFT``
   - ``RIGHT``
 
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - All other options from :ref:`Binary Sensor <config-binary_sensor>`.
 
 Troubleshooting:

components/sensor/b_parasite.rst

@@ -42,24 +42,23 @@ Configuration variables
 - **mac_address** (**Required**): The MAC address of the device.
 - **temperature** (*Optional*): Air temperature in Celsius.
 
-  - **name** (**Required**): Sensor name.
+  - All options from :ref:`Sensor <config-sensor>`.
-  - All other options from :ref:`Sensor <config-sensor>`.
+
 - **humidity** (*Optional*): Relative air humidity in %.
 
-  - **name** (**Required**): Sensor name.
+  - All options from :ref:`Sensor <config-sensor>`.
-  - All other options from :ref:`Sensor <config-sensor>`.
+
 - **moisture** (*Optional*): Soil moisture in %.
 
-  - **name** (**Required**): Sensor name.
+  - All options from :ref:`Sensor <config-sensor>`.
-  - All other options from :ref:`Sensor <config-sensor>`.
+
 - **battery_voltage** (*Optional*): Battery voltage in volts.
 
-  - **name** (**Required**): Sensor name.
+  - All options from :ref:`Sensor <config-sensor>`.
-  - All other options from :ref:`Sensor <config-sensor>`.
+
 - **illuminance** (*Optional*): Illuminance in lux.
 
-  - **name** (**Required**): Sensor name.
+  - All options from :ref:`Sensor <config-sensor>`.
-  - All other options from :ref:`Sensor <config-sensor>`.
 
 See Also
 --------

components/sensor/bh1750.rst

@@ -35,14 +35,11 @@ your configuration for this sensor to work.
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name for the sensor.
 - **address** (*Optional*, int): Manually specify the I²C address of the sensor.
   Defaults to ``0x23`` (address if address pin is pulled low). If the address pin is pulled high,
   the address is ``0x5C``.
 - **update_interval** (*Optional*, :ref:`config-time`): The interval to check the
   sensor. Defaults to ``60s``.
-- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code
-  generation.
 - All other options from :ref:`Sensor <config-sensor>`.
 
 See Also

components/sensor/binary_sensor_map.rst

@@ -121,7 +121,6 @@ The maximum amount of observations/channels supported is 64.
 Configuration variables:
 ------------------------
 
-- **name** (**Required**, string): The name of the sensor.
 - **type** (**Required**, string): The sensor type. Should be one of: ``BAYESIAN``, ``GROUP``, or ``SUM``.
 - **channels** (**Required for GROUP or SUM types**): A list of channels that are mapped to certain values.