Update bme680_bsec.rst

components/sensor/bme680_bsec.rst

@@ -65,7 +65,8 @@ Configuration variables:
 - **address** (*Optional*, int): Manually specify the I^2C address of the sensor. Defaults to ``0x76``. Another address can be ``0x77``.
 
 - **temperature_offset** (*Optional*, float): Temperature offset if device is in enclosure and reads too high.
-  This value is subtracted from the reading. If the sensor reads 5°C too high, set this to ``5``.
+  This value is subtracted from the reading. If the sensor reads 5°C too high, set this to ``5``.  
+  This also corrects the relative humidity readings.  
   Defaults to ``0``.
 
 - **iaq_mode** (*Optional*, string): IAQ calculation mode. Default is ``static`` for static applications (e.g. fixed indoor devices).
@@ -176,6 +177,7 @@ For each sensor all other options from :ref:`Sensor <config-sensor>` and :ref:`T
         # ------------------
         # Useful if device is in enclosure and reads too high
         # For example if it reads 5C too high, set this to 5
+        # This also corrects the relative humidity readings
         # Default: 0
         temperature_offset: 0