mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-09-28 04:17:47 +02:00
Update ethernet.rst
- formatted notes to look consistent - moved problematic boards to the bottom
This commit is contained in:
parent
fdf9f14362
commit
b3e43deb01
@ -71,20 +71,6 @@ Configuration variables:
|
||||
probably to fail as the ethernet interface uses a high frequency clock signal. For more
|
||||
information and wiring details refer to the link in the *See also* section.
|
||||
|
||||
Configuration for wESP32 board
|
||||
------------------------------
|
||||
|
||||
**Release 7 and upwards of the wESP32 board does not have a LAN8720 chip. Until support for the replacement RTL8201 is included in esphome, the wESP board will not work with the below configuration.**
|
||||
|
||||
.. code-block:: yaml
|
||||
|
||||
ethernet:
|
||||
type: LAN8720
|
||||
mdc_pin: GPIO16
|
||||
mdio_pin: GPIO17
|
||||
clk_mode: GPIO0_IN
|
||||
phy_addr: 0
|
||||
|
||||
Configuration for Olimex ESP32-POE
|
||||
----------------------------------
|
||||
|
||||
@ -122,20 +108,6 @@ Configuration for LILYGO TTGO T-Internet-POE ESP32-WROOM LAN8270A Chip
|
||||
clk_mode: GPIO17_OUT
|
||||
phy_addr: 0
|
||||
|
||||
Configuration for OpenHacks LAN8720
|
||||
-----------------------------------
|
||||
|
||||
.. code-block:: yaml
|
||||
|
||||
ethernet:
|
||||
type: LAN8720
|
||||
mdc_pin: GPIO23
|
||||
mdio_pin: GPIO18
|
||||
phy_addr: 1
|
||||
|
||||
Note: This board has an issue that might cause the ESP32 to boot in program mode. When testing, make sure you are monitoring the
|
||||
serial output and reboot the device several times to see if it boots into the program properly.
|
||||
|
||||
Configuration for Wireless Tag WT32-ETH01
|
||||
-----------------------------------------
|
||||
|
||||
@ -149,6 +121,40 @@ Configuration for Wireless Tag WT32-ETH01
|
||||
phy_addr: 1
|
||||
power_pin: GPIO16
|
||||
|
||||
Configuration for OpenHacks LAN8720
|
||||
-----------------------------------
|
||||
|
||||
.. code-block:: yaml
|
||||
|
||||
ethernet:
|
||||
type: LAN8720
|
||||
mdc_pin: GPIO23
|
||||
mdio_pin: GPIO18
|
||||
phy_addr: 1
|
||||
|
||||
.. note::
|
||||
|
||||
This board has an issue that might cause the ESP32 to boot in program mode. When testing, make sure
|
||||
you are monitoring the serial output and reboot the device several times to see if it boots into the
|
||||
program properly.
|
||||
|
||||
Configuration for wESP32 board (up to revision 6)
|
||||
-------------------------------------------------
|
||||
|
||||
.. code-block:: yaml
|
||||
|
||||
ethernet:
|
||||
type: LAN8720
|
||||
mdc_pin: GPIO16
|
||||
mdio_pin: GPIO17
|
||||
clk_mode: GPIO0_IN
|
||||
phy_addr: 0
|
||||
|
||||
.. note::
|
||||
|
||||
Revision 7 and upwards of the wESP32 board does not have a LAN8720 chip. Until support for the
|
||||
replacement RTL8201 is included in ESPHome, the wESP board will not work with the above configuration.
|
||||
|
||||
See Also
|
||||
--------
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user