Add MCP3208 to MCP3204 integration (#2006)
This commit is contained in:
parent
f342bc9ffb
commit
bbcb7a10ec
|
@ -1,14 +1,15 @@
|
|||
MCP3204 4-Channel 12-Bit A/D Converter
|
||||
======================================
|
||||
MCP3204 & MCP3208 12-Bit A/D Converters
|
||||
=======================================
|
||||
|
||||
.. seo::
|
||||
:description: Instructions for setting up MCP3204 12-Bit Analog to Digital Converter in ESPHome.
|
||||
:keywords: MCP3204
|
||||
:description: Instructions for setting up MCP3204 & MCP3208 12-Bit Analog to Digital Converter in ESPHome.
|
||||
:keywords: MCP3204 MCP3208
|
||||
:image: mcp3204.jpg
|
||||
|
||||
The Microchip Technology Inc. MCP3204
|
||||
The Microchip Technology Inc. MCP3204 & MCP3208
|
||||
devices are successive approximation 12-bit Analog-to-Digital (A/D) converters with on-board sample and
|
||||
hold circuitry.
|
||||
hold circuitry. This integration is common for both device types.
|
||||
configure both devices as MCP3204 and observe the maximum number of channels as per variant used.
|
||||
|
||||
.. figure:: images/mcp3204.jpg
|
||||
:align: center
|
||||
|
@ -19,17 +20,18 @@ hold circuitry.
|
|||
Component/Hub
|
||||
-------------
|
||||
|
||||
The MCP3204 component allows you to use MCP3204 4-Channel 12-Bit A/D Converter
|
||||
The MCP3204 component allows you to use MCP3204 or MCP3208 12-Bit A/D Converter
|
||||
(`datasheet <https://ww1.microchip.com/downloads/en/DeviceDoc/21298e.pdf>`__) in ESPHome.
|
||||
The MCP3204 is a 4-channel and MCP3208 is an 8-channel device.
|
||||
It uses the :ref:`SPI Bus <spi>` for communication.
|
||||
|
||||
Once configured, you can use any of the 4 pins as
|
||||
Once configured, you can use any of the 4 or 8 pins (depending on device variant) as
|
||||
sensors for your projects.
|
||||
|
||||
Each pin will respond with a voltage calculated off of the ``reference_voltage`` (default is 3.3V).
|
||||
It calculates the voltage by multiplying the ``reference_voltage * value`` on the pin (basically the percentage of VREF)
|
||||
|
||||
Most configurations will set the ``reference_voltage`` = VREF (pin 13 on the chip)
|
||||
Most configurations will set the ``reference_voltage`` = VREF pin
|
||||
|
||||
.. code-block:: yaml
|
||||
|
||||
|
@ -47,6 +49,12 @@ Most configurations will set the ``reference_voltage`` = VREF (pin 13 on the chi
|
|||
id: solar_voltage
|
||||
number: 0 # MCP3204 pin number
|
||||
|
||||
# In case MCP3208 is used. you can specify pin number > 4
|
||||
- platform: mcp3204 # Attached to pin 7 of the MCP3208.
|
||||
update_interval: 1s
|
||||
id: supply_voltage
|
||||
number: 7 # MCP3208 pin number
|
||||
|
||||
|
||||
Configuration variables:
|
||||
************************
|
||||
|
@ -59,8 +67,8 @@ Configuration variables:
|
|||
Sensor
|
||||
------
|
||||
|
||||
The ``mcp3204`` sensor allows you to use your MCP3204 12-Bit A/D Converter sensors with ESPHome.
|
||||
First, setup a :ref:`MCP3204 Hub <mcp3204-component>` for your MCP3204 sensor and then use this
|
||||
The ``mcp3204`` sensor allows you to use your MCP3204 or MCP3208 12-Bit A/D Converter sensors with ESPHome.
|
||||
First, setup a :ref:`MCP3204 Hub <mcp3204-component>` for your MCP3204/8 sensor and then use this
|
||||
sensor platform to create individual sensors that will report the voltage to Home Assistant.
|
||||
|
||||
Configuration variables:
|
||||
|
|
Loading…
Reference in New Issue