Fix spelling/capitalizing mistakes in ESPHome (#1187)

This commit is contained in:
Oxan van Leeuwen 2021-05-20 16:00:53 +02:00 committed by GitHub
parent e258c2b8a7
commit c8aceb21e2
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
7 changed files with 12 additions and 12 deletions

View File

@ -47,7 +47,7 @@ VCC to 3.3V and GND to GND.
Backlight Backlight
********* *********
To use a backlight LIGHT pin needs to be connected to ground. If connected to GPIO pin it can be controlled from EPSHome. See :doc:`/components/light/monochromatic`. To use a backlight LIGHT pin needs to be connected to ground. If connected to GPIO pin it can be controlled from ESPHome. See :doc:`/components/light/monochromatic`.
Configuration variables: Configuration variables:

View File

@ -23,7 +23,7 @@ Configuration variables:
------------------------ ------------------------
- **name** (**Required**, string): This is the name of the node. It - **name** (**Required**, string): This is the name of the node. It
should always be unique in your ESPhome network. May only contain lowercase should always be unique in your ESPHome network. May only contain lowercase
characters, digits and hyphens. See :ref:`esphome-changing_node_name`. characters, digits and hyphens. See :ref:`esphome-changing_node_name`.
- **platform** (**Required**, string): The platform your board is on, - **platform** (**Required**, string): The platform your board is on,
either ``ESP32`` or ``ESP8266``. See :ref:`esphome-arduino_version`. either ``ESP32`` or ``ESP8266``. See :ref:`esphome-arduino_version`.
@ -162,7 +162,7 @@ is already set up. You can however change this using the ``priority`` parameter.
Configuration variables: Configuration variables:
- **priority** (*Optional*, float): The priority to execute your custom initialization code. A higher value - **priority** (*Optional*, float): The priority to execute your custom initialization code. A higher value
means a high priority and thus also your code being executed earlier. Please note this is an ESPhome-internal means a high priority and thus also your code being executed earlier. Please note this is an ESPHome-internal
value and any change will not be marked as a breaking change. Defaults to ``-10``. Priorities (you can use any value between them too): value and any change will not be marked as a breaking change. Defaults to ``-10``. Priorities (you can use any value between them too):
- ``800.0``: This is where all hardware initialization of vital components is executed. For example setting switches - ``800.0``: This is where all hardware initialization of vital components is executed. For example setting switches

View File

@ -19,7 +19,7 @@ Component/Hub
The AS3935 can be configured to use either the SPI **or** I²C protocol for data communication. The AS3935 can be configured to use either the SPI **or** I²C protocol for data communication.
First choose which communication method you want to use for the sensor, set the SI pin for the appropriate First choose which communication method you want to use for the sensor, set the SI pin for the appropriate
level and set up the ESPhome integration for the chosen communication method. level and set up the ESPHome integration for the chosen communication method.
Module Pins Module Pins
----------- -----------

View File

@ -38,7 +38,7 @@ Configuration variables:
A4988 Component A4988 Component
--------------- ---------------
Put this code into the configuration file on ESPhome for this device. Put this code into the configuration file on ESPHome for this device.
.. code-block:: yaml .. code-block:: yaml

View File

@ -2,7 +2,7 @@ Time & Temperature on OLED Display
================================== ==================================
.. seo:: .. seo::
:description: Instructions for setting up a display in ESPhome to show sensor values from Home Assistant :description: Instructions for setting up a display in ESPHome to show sensor values from Home Assistant
:image: display_time_temp_oled_1.jpg :image: display_time_temp_oled_1.jpg
:keywords: Display :keywords: Display

View File

@ -3,11 +3,11 @@ ESP32 Water Leak Detector (with notification)
============================================= =============================================
.. seo:: .. seo::
:description: Water leak detector with ESPhome on an M5StickC ESP32 :description: Water leak detector with ESPHome on an M5StickC ESP32
:image: images/leak-detector-m5stickC_dry.jpg :image: images/leak-detector-m5stickC_dry.jpg
:keywords: Leak Detector M5StickC M5Stack M5Atom :keywords: Leak Detector M5StickC M5Stack M5Atom
Using the ESP32's capacitive touch GPIOs, it's relatively easy to build a water leak detector using ESPhome. M5StickC was chosen as a platform due to the integrated Grove connector for clean connections and the fact it's well housed. The built-in display is a bonus, but not strictly necessary. Notifications are performed via HomeAssistant's 'alert' and 'notify' facilities, which send via Pushover to iOS & Android. Using the ESP32's capacitive touch GPIOs, it's relatively easy to build a water leak detector using ESPHome. M5StickC was chosen as a platform due to the integrated Grove connector for clean connections and the fact it's well housed. The built-in display is a bonus, but not strictly necessary. Notifications are performed via HomeAssistant's 'alert' and 'notify' facilities, which send via Pushover to iOS & Android.
.. figure:: images/leak-detector-m5stickC_LeakDetected.gif .. figure:: images/leak-detector-m5stickC_LeakDetected.gif
:align: center :align: center
@ -67,14 +67,14 @@ Assembled Components
Display Font Display Font
============ ============
You'll need to place the `OpenSans-Regular <https://fonts.google.com/specimen/Open+Sans>`__ font (or another of your choosing) alongside your ESPhome yaml file. See - :doc:`/components/display/index`. You'll need to place the `OpenSans-Regular <https://fonts.google.com/specimen/Open+Sans>`__ font (or another of your choosing) alongside your ESPHome yaml file. See - :doc:`/components/display/index`.
Flashing Flashing
======== ========
I initially had trouble flashing the M5StickC; this is the procedure that I've found to work well with these devices. I initially had trouble flashing the M5StickC; this is the procedure that I've found to work well with these devices.
You must provide the ESP32 bootloader during the initial flash over USB. Compile your ESPhome binary, and flash it along with the required bootloader (bootloader_dio_80m.bin), `available here <https://github.com/espressif/arduino-esp32/tree/master/tools/sdk/bin>`__, from the commandline (example under macos): You must provide the ESP32 bootloader during the initial flash over USB. Compile your ESPHome binary, and flash it along with the required bootloader (bootloader_dio_80m.bin), `available here <https://github.com/espressif/arduino-esp32/tree/master/tools/sdk/bin>`__, from the commandline (example under macos):
``cd /Applications/ESPHome-Flasher-1.2.0-macOS.app/Contents/MacOS`` ``cd /Applications/ESPHome-Flasher-1.2.0-macOS.app/Contents/MacOS``
@ -115,7 +115,7 @@ Not shown: Probe is placed on the floor in the corner, out of the way, in the lo
------------ ------------
ESPhome configuration ESPHome configuration
===================== =====================
.. code-block:: yaml .. code-block:: yaml

View File

@ -44,7 +44,7 @@ Blog Posts & Videos
- `Washing machine phases detector (Sonoff Pow R2) <https://github.com/Gio-dot/Washing-Machine-Sonoff-Pow-R2-Esphome>`__ by `Gio-dot <https://github.com/Gio-dot>`__ - `Washing machine phases detector (Sonoff Pow R2) <https://github.com/Gio-dot/Washing-Machine-Sonoff-Pow-R2-Esphome>`__ by `Gio-dot <https://github.com/Gio-dot>`__
- `Sonoff L1 LED Strip <https://emorydunn.com/blog/2020/08/10/sonoff-l1-home-assistant/>`__ by :ghuser:`emorydunn` - `Sonoff L1 LED Strip <https://emorydunn.com/blog/2020/08/10/sonoff-l1-home-assistant/>`__ by :ghuser:`emorydunn`
- `ESPHome for SP501E LED Controller <https://margau.net/posts/2020-11-21-2h-led-hack/>`__ by `margau <https://margau.net>`__ - `ESPHome for SP501E LED Controller <https://margau.net/posts/2020-11-21-2h-led-hack/>`__ by `margau <https://margau.net>`__
- `4$ Xiaomi mijia thermometer LYWSD03MMC + ESP32 + ESPhome <https://omarghader.github.io/how-to-monitor-your-home-temperature-with-esp32-and-xiaomi-mijia-using-esphome/>`__ by `Omar GHADER <https://omarghader.github.io/post>`__ - `4$ Xiaomi mijia thermometer LYWSD03MMC + ESP32 + ESPHome <https://omarghader.github.io/how-to-monitor-your-home-temperature-with-esp32-and-xiaomi-mijia-using-esphome/>`__ by `Omar GHADER <https://omarghader.github.io/post>`__
- `Baseboard (Line Voltage) Thermostat from Smart Switch <https://github.com/rjmurph2241/baseboard-heating-thermostat>`__ by :ghuser:`rjmurph2241` - `Baseboard (Line Voltage) Thermostat from Smart Switch <https://github.com/rjmurph2241/baseboard-heating-thermostat>`__ by :ghuser:`rjmurph2241`
- `Office Doorbell <https://github.com/shish/esphome-projects/blob/master/office-doorbell.md>`__ by :ghuser:`shish` - `Office Doorbell <https://github.com/shish/esphome-projects/blob/master/office-doorbell.md>`__ by :ghuser:`shish`
- `Display TM1637 with ESPHome and MQTT showing Youtube subscribers count and other info <https://youtu.be/27JZEky0h1Q>`__ by :ghuser:`electrofun-smart` - `Display TM1637 with ESPHome and MQTT showing Youtube subscribers count and other info <https://youtu.be/27JZEky0h1Q>`__ by :ghuser:`electrofun-smart`