Honeywellabp (#1880)

Co-authored-by: RubyBailey <ruby_bailey11@hotmail.com>

components/sensor/honeywellabp.rst

@@ -0,0 +1,69 @@
+Honeywell ABP Pressure Sensors
+==============================
+
+.. seo::
+    :description: Instructions for setting up Honeywell ABP Pressure sensors
+    :image: honeywellabp.jpg
+    :keywords: Honeywell ABP
+
+The ``honeywellabp`` sensor platform allows you to use your Honeywell ABP 
+(`website <https://sps.honeywell.com/us/en/products/sensing-and-iot/sensors/pressure-sensors/board-mount-pressure-sensors/basic-abp-series>`__,
+`datasheet <https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/basic-abp-series/documents/sps-siot-basic-board-mount-pressure-abp-series-datasheet-32305128-ciid-155789.pdf?download=false>`__,
+`Mouser <https://www.mouser.ca/new/honeywell/honeywell-abp-pressure-sensors/>`_) pressure and temperature sensors with ESPHome. The :ref:`SPI <spi>` is
+required to be set up in your configuration for this sensor to work
+
+.. figure:: images/honeywellabp.jpg
+    :align: center
+    :width: 50.0%
+
+    Honeywell ABP Pressure and Temperature Sensor.
+
+.. code-block:: yaml
+
+    # Example configuration entry
+    sensor:
+    - platform: honeywellabp
+        pressure:
+          name: "Honeywell pressure"
+          unit_of_measurement: "psi"
+          min_pressure: 0
+          max_pressure: 15
+        temperature:
+          name: "Honeywell temperature"
+        cs_pin: GPIO5 #D5
+
+Configuration variables:
+------------------------
+
+The values for ``min_pressure`` and ``max_pressure`` can be found in the device datasheet for the specific device. These are used to calculate 
+the pressure reading published by the sensor. Some sensors measure pressure in ``bar`` or ``kPa``; set ``min_pressure`` and ``max_pressure`` to 
+the measurement range and ``unit_of_measurement`` to the appropriate unit for your device.
+
+- **pressure** (*Optional*): The information for the pressure sensor.
+
+  - **name** (**Required**, string): The name for the pressure sensor.
+  - **min_pressure** (**Required**, int or float): Minumim pressure for the pressure sensor, default unit ``psi``.
+  - **max_pressure** (**Required**, int or float): Maximum pressure for the pressure sensor, default unit ``psi``.
+  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
+  - All other options from :ref:`Sensor <config-sensor>`.
+
+Some sensors do not have temperature sensing ability, see datasheet. In some cases the sensor may return a valid temperature even though the 
+datasheet indicates that the sensor does not measure temperature.
+
+- **temperature** (*Optional*): The information for the temperature sensor.
+
+  - **name** (**Required**, string): The name for the temperature sensor.
+  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
+  - All other options from :ref:`Sensor <config-sensor>`.
+
+
+- **cs_pin** (**Required**, :ref:`SPI <spi>`): Chip select pin.
+- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the
+  sensor. Defaults to ``60s``.
+
+See Also
+--------
+
+- :ref:`sensor-filters`
+- :apiref:`honeywellabp/honeywellabp.h`
+- :ghedit:`Edit`

index.rst

@@ -292,6 +292,7 @@ Environmental
     DHT, components/sensor/dht, dht.jpg, Temperature & Humidity
     DHT12, components/sensor/dht12, dht12.jpg, Temperature & Humidity
     HDC1080, components/sensor/hdc1080, hdc1080.jpg, Temperature & Humidity
+    Honeywell ABP, components/sensor/honeywellabp, honeywellabp.jpg, Pressure & Temperature
     HTU21D, components/sensor/htu21d, htu21d.jpg, Temperature & Humidity
     Inkbird IBS-TH1 Mini, components/sensor/inkbird_ibsth1_mini, inkbird_isbth1_mini.jpg, Temperature & Humidity
     MCP9808, components/sensor/mcp9808, mcp9808.jpg, Temperature