Merge pull request #2031 from esphome/bump-2022.4.0

2022.4.0
2024-12-26 17:27:47 +01:00 · 2022-04-21 07:43:45 +12:00 · 2022-04-21 07:43:45 +12:00 · f130f0cb67
commit f130f0cb67
parent b8cf9e7ea7 3f0d15819b
38 changed files with 1054 additions and 34 deletions
--- a/2
+++ b/2
@ -38,7 +38,7 @@ PROJECT_NAME           = "ESPHome"
 # could be handy for archiving the generated documentation or if some version
 # control system is used.

-PROJECT_NUMBER         = 2022.3.2
+PROJECT_NUMBER         = 2022.4.0

 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer a
--- a/2
+++ b/2
@ -1,5 +1,5 @@
 ESPHOME_PATH = ../esphome
-ESPHOME_REF = 2022.3.2
+ESPHOME_REF = 2022.4.0

 .PHONY: html html-strict cleanhtml deploy help live-html Makefile netlify netlify-api api netlify-dependencies svg2png copy-svg2png minify

--- a/_static/changelog-2022.4.0.png
+++ b/_static/changelog-2022.4.0.png
--- a/_static/version
+++ b/_static/version
@ -1 +1 @@
-2022.3.2
+2022.4.0
--- a/changelog/2022.4.0.rst
+++ b/changelog/2022.4.0.rst
@ -0,0 +1,240 @@
+ESPHome 2022.4.0 - 20th April 2022
+==================================
+
+.. seo::
+    :description: Changelog for ESPHome 2022.4.0.
+    :image: /_static/changelog-2022.4.0.png
+    :author: Jesse Hills
+    :author_twitter: @jesserockz
+
+.. imgtable::
+    :columns: 3
+
+    QMP6988, components/sensor/qmp6988, qmp6988_env3.png
+    Hydreon Rain Sensor, components/binary_sensor/hydreon_rgxx, hydreon_rg9.jpg
+    Mi Motion Sensor 2, components/sensor/xiaomi_ble, xiaomi_rtcgq02lm.jpg
+    Sonoff D1 Dimmer, components/light/sonoff_d1, sonoff_d1.jpg
+    MCP3208, components/sensor/mcp3204, mcp3204.jpg
+    Shelly Dimmer, components/light/shelly_dimmer, shellydimmer2.jpg
+
+
+Home Assistant Addon Repo
+-------------------------
+
+This is a repeat from the 2022.2 release notes.
+
+The `ESPHome Home Assistant addon repository <https://github.com/esphome/home-assistant-addon>`__
+is added by default to new Home Assistant installations. Because of this, we have decided that we would
+deprecate the ESPHome addon inside the `Community Addons <https://github.com/hassio-addons/repository>`__
+and everyone should move to the ESPHome repo. It is safe to delete the Community ESPHome addon as
+your configuration YAML files are stored in the Home Assistant configuration folder.
+
+You can add the repository here:
+
+.. raw:: html
+
+    <a href="https://my.home-assistant.io/redirect/supervisor_add_addon_repository/?repository_url=https%3A%2F%2Fgithub.com%2Fesphome%2Fhome-assistant-addon"
+       target="_blank">
+        <img src="https://my.home-assistant.io/badges/supervisor_add_addon_repository.svg"
+             alt="Open your Home Assistant instance and show the add add-on repository dialog with a specific repository URL pre-filled." />
+    </a>
+
+And then install the latest ESPHome addon here:
+
+.. raw:: html
+
+    <a href="https://my.home-assistant.io/redirect/supervisor_addon/?addon=5c53de3b_esphome" target="_blank">
+        <img src="https://my.home-assistant.io/badges/supervisor_addon.svg"
+             alt="Open your Home Assistant instance and show the dashboard of a Supervisor add-on." />
+    </a>
+
+Python 3.8 Minimum
+------------------
+
+A friendly reminder that 2022.3 set the minimum Python version to 3.8.
+Please upgrade your local python if you are unable to update ESPHome further.
+This is taken care of automatically if you are using the Home Assistant Add-on, or the
+ESPHome docker container.
+
+Shelly Dimmer 2
+---------------
+
+Support for the STM32 chip of the Shelly Dimmer has been added in this release. The component also supports flashing custom firmware to the
+stm32 via ESPHome which is required to use the component. See the :doc:`documentation </components/light/shelly_dimmer>` for more details.
+
+Google Fonts
+------------
+
+:ghuser:`OttoWinter` has given everyone a way to use Google Fonts in their yaml and displays without having to manually download
+ttf font files. The exqample below will automatically download and cache the Roboto ttf font file required so you can utilise it.
+See the :ref:`display-static_text` documentation for more details.
+
+.. code-block:: yaml
+
+    font:
+      - file: "gfonts://Roboto"
+        id: roboto
+        size: 20
+
+
+Deep sleep wakeup time
+----------------------
+
+Deep sleep for ESP32 has had a new feature added.
+
+.. code-block:: yaml
+
+    on_...:
+      - deep_sleep.enter:
+          until: "14:00:00"
+          time_id: ...
+
+This will automatically calculate the time required to deep sleep to ensure that the device will
+wake up at "14:00:00". The time format here is local time to match the timezone you have configured and
+this requires a time component to be configured.
+
+
+Sensors imported from Home Assistant
+------------------------------------
+
+In this release there is a breaking change on the sensors that are imported from homeassistant, ``platform: homeassistant``.
+They will now default to being internal to ESPHome and will not be re-exported back to Home Assistant, MQTT or the web server.
+This change makes sense as it was just extra sensors and netowkr traffic. You are able to add these back as non internal by
+adding ``internal: false`` to the yaml for each of the sensors.
+
+
+Full list of changes
+--------------------
+
+New Features
+^^^^^^^^^^^^
+
+- Allow to set user defined characters on LCD :esphomepr:`3322` by :ghuser:`numo68` (new-feature)
+- Font allow using google fonts directly :esphomepr:`3243` by :ghuser:`OttoWinter` (new-feature) (notable-change)
+- Add mqtt for idf :esphomepr:`2930` by :ghuser:`martgras` (new-feature)
+- Extend mcp3204 to support 8 channels (mcp3208 variant) :esphomepr:`3332` by :ghuser:`RadekHvizdos` (new-feature)
+- Add cover toggle support to endstop cover :esphomepr:`3358` by :ghuser:`rrooggiieerr` (new-feature)
+- Remote base pronto receive :esphomepr:`2826` by :ghuser:`cvwillegen` (new-feature)
+- Allow specifying deep sleep wakup clock time :esphomepr:`3312` by :ghuser:`jesserockz` (new-feature)
+
+New Components
+^^^^^^^^^^^^^^
+
+- Add support for QMP6988 Pressure sensor :esphomepr:`3192` by :ghuser:`andrewpc` (new-integration)
+- Add integration hydreon_rgxx for rain sensors by Hydreon :esphomepr:`2711` by :ghuser:`functionpointer` (new-integration)
+- Add Xiaomi RTCGQ02LM - Mi Motion Sensor 2 :esphomepr:`3186` by :ghuser:`jesserockz` (new-integration)
+- Add Sonoff D1 Dimmer support :esphomepr:`2775` by :ghuser:`anatoly-savchenkov` (new-integration)
+- Refactor Sensirion Sensors :esphomepr:`3374` by :ghuser:`martgras` (new-integration)
+- Add support for Shelly Dimmer 2 :esphomepr:`2954` by :ghuser:`rnauber` (new-integration)
+
+Breaking Changes
+^^^^^^^^^^^^^^^^
+
+- Make home_assistant imported sensors internal by default :esphomepr:`3372` by :ghuser:`jesserockz` (breaking-change)
+
+Beta Changes
+^^^^^^^^^^^^
+
+- Actually increase request memory for json parsing :esphomepr:`3331` by :ghuser:`jesserockz`
+- Actually increase request memory for json parsing :esphomepr:`3331` by :ghuser:`jesserockz`
+- Changes accuracy of single cell voltage :esphomepr:`3387` by :ghuser:`matthias882`
+- Add support for Shelly Dimmer 2 :esphomepr:`2954` by :ghuser:`rnauber` (new-integration)
+- Allocate smaller amount of buffer for JSON :esphomepr:`3384` by :ghuser:`dz0ny`
+- Fix power_delivered/produced_phase sensor deviceclass in DSMR :esphomepr:`3395` by :ghuser:`mvdwetering`
+- Shelly Dimmer: Delete obsolete LICENSE.txt :esphomepr:`3394` by :ghuser:`rnauber`
+- Dont require empty object for wifi ap with defaults :esphomepr:`3404` by :ghuser:`jesserockz`
+
+Notable Changes
+^^^^^^^^^^^^^^^
+
+- Font allow using google fonts directly :esphomepr:`3243` by :ghuser:`OttoWinter` (new-feature) (notable-change)
+
+All changes
+^^^^^^^^^^^
+
+- Bump pytest-asyncio from 0.18.1 to 0.18.2 :esphomepr:`3262` by :ghuser:`dependabot[bot]`
+- Bump zeroconf from 0.38.3 to 0.38.4 :esphomepr:`3257` by :ghuser:`dependabot[bot]`
+- Bump click from 8.0.3 to 8.0.4 :esphomepr:`3248` by :ghuser:`dependabot[bot]`
+- Bump docker dependencies :esphomepr:`3281` by :ghuser:`OttoWinter`
+- Fixed wrong comment :esphomepr:`3286` by :ghuser:`Rai-Rai`
+- Add support for QMP6988 Pressure sensor :esphomepr:`3192` by :ghuser:`andrewpc` (new-integration)
+- Adds support for b-parasite's v2 BLE protocol :esphomepr:`3290` by :ghuser:`rbaron`
+- increase delay for Ethernet module warm up Safe Mode :esphomepr:`3326` by :ghuser:`nagyrobi`
+- Bump esptool from 3.2 to 3.3 :esphomepr:`3327` by :ghuser:`dependabot[bot]`
+- Allow to set user defined characters on LCD :esphomepr:`3322` by :ghuser:`numo68` (new-feature)
+- Font allow using google fonts directly :esphomepr:`3243` by :ghuser:`OttoWinter` (new-feature) (notable-change)
+- Actually increase request memory for json parsing :esphomepr:`3331` by :ghuser:`jesserockz`
+- Actually increase request memory for json parsing :esphomepr:`3331` by :ghuser:`jesserockz`
+- Change beginning of file comments to avoid creating doxygen tag for `esphome` namespace :esphomepr:`3314` by :ghuser:`e28eta`
+- Publish custom data when modbus number lambda fills vector :esphomepr:`3295` by :ghuser:`jesserockz`
+- Define touchscreen support when in use. :esphomepr:`3296` by :ghuser:`geiseri`
+- New vscode schema gen :esphomepr:`3336` by :ghuser:`glmnet`
+- protobuf: fix incomplete 64 bits implementation :esphomepr:`3341` by :ghuser:`ianchi`
+- feat: support ble_client that use security w/o pin codes :esphomepr:`3320` by :ghuser:`ammmze`
+- Add mqtt for idf :esphomepr:`2930` by :ghuser:`martgras` (new-feature)
+- Added a function to load custom characters in LCD display :esphomepr:`3279` by :ghuser:`andrewjswan`
+- CAN bus: support remote transmission request flag for canbus.send :esphomepr:`3193` by :ghuser:`felixstorm`
+- Tm1637 binarysensor :esphomepr:`2792` by :ghuser:`mvturnho`
+- Bump click from 8.0.4 to 8.1.2 :esphomepr:`3351` by :ghuser:`dependabot[bot]`
+- Bump pylint from 2.12.2 to 2.13.4 :esphomepr:`3348` by :ghuser:`dependabot[bot]`
+- Bump pytest-asyncio from 0.18.2 to 0.18.3 :esphomepr:`3335` by :ghuser:`dependabot[bot]`
+- Bump pytest from 7.0.1 to 7.1.1 :esphomepr:`3313` by :ghuser:`dependabot[bot]`
+- Bump docker dependencies :esphomepr:`3354` by :ghuser:`OttoWinter`
+- Bump voluptuous from 0.12.2 to 0.13.0 :esphomepr:`3355` by :ghuser:`dependabot[bot]`
+- Bump tzlocal from 4.1 to 4.2 :esphomepr:`3356` by :ghuser:`dependabot[bot]`
+- Bump pyupgrade from 2.31.0 to 2.31.1 :esphomepr:`3292` by :ghuser:`dependabot[bot]`
+- Bump black from 22.1.0 to 22.3.0 :esphomepr:`3357` by :ghuser:`dependabot[bot]`
+- Allow on_value_range for sensor and number to be templated :esphomepr:`3359` by :ghuser:`jesserockz`
+- Add support for Electrolux heatpump and bump arduino-heatpumpir version :esphomepr:`3353` by :ghuser:`ikilledmypc`
+- Implement newer RTU protocol of Growatt inverters :esphomepr:`3315` by :ghuser:`djwlindenaar`
+- Add parameter to control i2c stop signal at endTransmission :esphomepr:`3370` by :ghuser:`kbickar`
+- Fix SHTC3 sensor detection :esphomepr:`3365` by :ghuser:`ssieb`
+- Extend mcp3204 to support 8 channels (mcp3208 variant) :esphomepr:`3332` by :ghuser:`RadekHvizdos` (new-feature)
+- Bump pyupgrade from 2.31.1 to 2.32.0 :esphomepr:`3366` by :ghuser:`dependabot[bot]`
+- Bump voluptuous from 0.13.0 to 0.13.1 :esphomepr:`3364` by :ghuser:`dependabot[bot]`
+- Bump pylint from 2.13.4 to 2.13.5 :esphomepr:`3363` by :ghuser:`dependabot[bot]`
+- Fix HM3301 AQI int8 overflow :esphomepr:`3361` by :ghuser:`calco88`
+- Add cover toggle support to endstop cover :esphomepr:`3358` by :ghuser:`rrooggiieerr` (new-feature)
+- Make home_assistant imported sensors internal by default :esphomepr:`3372` by :ghuser:`jesserockz` (breaking-change)
+- Add integration hydreon_rgxx for rain sensors by Hydreon :esphomepr:`2711` by :ghuser:`functionpointer` (new-integration)
+- Addition of Deep Sleep RTC pin definition for ESP32-S2 :esphomepr:`3303` by :ghuser:`andrewpc`
+- Add Xiaomi RTCGQ02LM - Mi Motion Sensor 2 :esphomepr:`3186` by :ghuser:`jesserockz` (new-integration)
+- Add Sonoff D1 Dimmer support :esphomepr:`2775` by :ghuser:`anatoly-savchenkov` (new-integration)
+- Remote base pronto receive :esphomepr:`2826` by :ghuser:`cvwillegen` (new-feature)
+- Use correct http defines :esphomepr:`3378` by :ghuser:`dz0ny`
+- Refactor Sensirion Sensors :esphomepr:`3374` by :ghuser:`martgras` (new-integration)
+- Fix silent config errors :esphomepr:`3380` by :ghuser:`jesserockz`
+- Move PN532OnTagTrigger to nfc::NfcOnTagTrigger :esphomepr:`3379` by :ghuser:`jesserockz`
+- Allow specifying deep sleep wakup clock time :esphomepr:`3312` by :ghuser:`jesserockz` (new-feature)
+- Changes accuracy of single cell voltage :esphomepr:`3387` by :ghuser:`matthias882`
+- Add support for Shelly Dimmer 2 :esphomepr:`2954` by :ghuser:`rnauber` (new-integration)
+- Allocate smaller amount of buffer for JSON :esphomepr:`3384` by :ghuser:`dz0ny`
+- Fix power_delivered/produced_phase sensor deviceclass in DSMR :esphomepr:`3395` by :ghuser:`mvdwetering`
+- Shelly Dimmer: Delete obsolete LICENSE.txt :esphomepr:`3394` by :ghuser:`rnauber`
+- Dont require empty object for wifi ap with defaults :esphomepr:`3404` by :ghuser:`jesserockz`
+
+Past Changelogs
+---------------
+
+- :doc:`2022.3.0`
+- :doc:`2022.2.0`
+- :doc:`2022.1.0`
+- :doc:`2021.12.0`
+- :doc:`2021.11.0`
+- :doc:`2021.10.0`
+- :doc:`2021.9.0`
+- :doc:`2021.8.0`
+- :doc:`v1.20.0`
+- :doc:`v1.19.0`
+- :doc:`v1.18.0`
+- :doc:`v1.17.0`
+- :doc:`v1.16.0`
+- :doc:`v1.15.0`
+- :doc:`v1.14.0`
+- :doc:`v1.13.0`
+- :doc:`v1.12.0`
+- :doc:`v1.11.0`
+- :doc:`v1.10.0`
+- :doc:`v1.9.0`
+- :doc:`v1.8.0`
+- :doc:`v1.7.0`
--- a/changelog/index.rst
+++ b/changelog/index.rst
@ -2,7 +2,7 @@ Changelog
 =========

 .. redirect::
-    :url: /changelog/2022.3.0.html
+    :url: /changelog/2022.4.0.html

 .. toctree::
    :glob:
--- a/components/binary_sensor/hydreon_rgxx.rst
+++ b/components/binary_sensor/hydreon_rgxx.rst
@ -0,0 +1,55 @@
+Hydreon Rain Sensor Binary Sensor
+=================================
+
+.. seo::
+    :description: Instructions for setting up Hydreon rain sensors
+    :image: hydreon_rg9.jpg
+    :keywords: hydreon
+
+The ``hydreon_rgxx`` binary sensor platform gives access to information provided by a Hydreon Rain Sensor.
+For this sensor to work, a :doc:`/components/sensor/hydreon_rgxx` must be set up.
+
+.. code-block:: yaml
+
+    # Example RG-9 entry
+    
+    uart:
+      rx_pin: GPIO16
+      tx_pin: GPIO17
+      baud_rate: 9600
+
+    sensor:
+      - platform: hydreon_rgxx
+        model: "RG_9"
+        id: "hydreon_1"
+        update_interval: 1s
+        moisture:
+          name: "rain"
+          expire_after: 30s  
+          
+    binary_sensor:
+      - platform: hydreon_rgxx
+        hydreon_rgxx_id: "hydreon_1"
+        too_cold:
+          name: "too cold"
+
+Configuration variables:
+------------------------
+
+- **hydreon_rgxx_id** (*Optional*, :ref:`config-id`): The ID of the Hydreon Rain Sensor display.
+
+- **too_cold** (*Optional*): `true` if the sensor reports being too cold. Hydreon only mentions this feature for the RG-9.
+
+  - **name** (**Required**, string): The name for the voltage sensor.
+  
+  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
+  
+  - All other options from :ref:`Binary Sensor <config-binary_sensor>`.
+
+
+See Also
+--------
+
+- :doc:`/components/sensor/hydreon_rgxx`
+- :doc:`index`
+- :ghedit:`Edit`
--- a/components/canbus.rst
+++ b/components/canbus.rst
@ -83,16 +83,17 @@ Configuration variables:
 Automations:
 ------------

- **on_frame** (*Optional*, :ref:`Automation <automation>`): An automation to perform when ability
-  CAN Frame is received. See :ref:`canbus-on-frame`.
+- **on_frame** (*Optional*, :ref:`Automation <automation>`): An automation to perform when a
+  CAN frame is received. See :ref:`canbus-on-frame`.

 .. _canbus-on-frame:

 ``on_frame``
 ************

-This automation will be triggered when a can frame is  received. A variable ``x`` of type
-``std::vector<uint8_t>`` is passed to the automation for use in lambdas.
+This automation will be triggered when a CAN frame is received. A variable ``x`` of type
+``std::vector<uint8_t>`` containing the frame data and a variable ``can_id`` of type ``uint32_t``
+containing the actual received CAN id are passed to the automation for use in lambdas.

 .. note::

@ -110,6 +111,34 @@ This automation will be triggered when a can frame is  received. A variable ``x`
                  lambda: 'return (x.size() > 0) ? x[0] == 0x11 : false;'
                then:
                  light.toggle: light1
+        - can_id:      0b00000000000000000000001000000
+          can_id_mask: 0b11111000000000011111111000000
+          use_extended_id: true
+          then:
+            - lambda: |-
+                auto pdo_id = can_id >> 14;
+                switch (pdo_id)
+                {
+                  case 117:
+                    ESP_LOGD("canbus", "exhaust_fan_duty");
+                    break;
+                  case 118:
+                    ESP_LOGD("canbus", "supply_fan_duty");
+                    break;
+                  case 119:
+                    ESP_LOGD("canbus", "supply_fan_flow");
+                    break;
+                  // to be continued...
+                }
+
+
+Configuration variables:
+************************
+
+- **can_id** (**Required**, int): The received CAN id to trigger this automation on.
+- **can_id_mask** (*Optional*, int): The bit mask to apply to the received CAN id before trying to match it
+  with *can_id*, defaults to ``0x1fffffff`` (all bits of received CAN id are compared with *can_id*).
+- **use_extended_id** (*Optional*, boolean): Identifies the type of *can_id* to match on, defaults to *false*.

 ``canbus.send`` Action
 **********************
@ -144,6 +173,8 @@ Configuration variables:
  the can bus device.
 - **use_extended_id** (*Optional*, boolean): default *false* identifies the type of *can_id*:
  *false*: Standard 11 Bit IDs, *true*: Extended 29Bit ID
+- **remote_transmission_request** (*Optional*, boolean): Set to send CAN bus frame to request data from another node
+  (defaults to *false*). If a certain data length code needs to be sent, provide as many (dummy) bytes in *data*.

 ESP32 CAN Component
 -------------------
--- a/components/climate/climate_ir.rst
+++ b/components/climate/climate_ir.rst
@ -98,7 +98,7 @@ This platform utilises the library's generic one-size-fits-all API, which might

 Additional configuration must be specified for this platform:

- **protocol** (**Required**, string): Choose one of Arduino-HeatpumpIR's supported protcols: ``aux``, ``ballu``, ``carrier_mca``, ``carrier_nqv``, ``daikin_arc417``, ``daikin_arc480``, ``daikin``, ``fuego``, ``fujitsu_awyz``, ``gree``, ``greeya``, ``greeyac``, ``greeyan``, ``hisense_aud``, ``hitachi``, ``hyundai``, ``ivt``, ``midea``, ``mitsubishi_fa``, ``mitsubishi_fd``, ``mitsubishi_fe``, ``mitsubishi_heavy_fdtc``, ``mitsubishi_heavy_zj``, ``mitsubishi_heavy_zm``, ``mitsubishi_heavy_zmp``, ``mitsubishi_heavy_kj``, ``mitsubishi_msc``, ``mitsubishi_msy``, ``mitsubishi_sez``, ``panasonic_ckp``, ``panasonic_dke``, ``panasonic_jke``, ``panasonic_lke``, ``panasonic_nke``, ``samsung_aqv``, ``samsung_fjm``, ``sharp``, ``toshiba_daiseikai``, ``toshiba``
+- **protocol** (**Required**, string): Choose one of Arduino-HeatpumpIR's supported protcols: ``aux``, ``ballu``, ``carrier_mca``, ``carrier_nqv``, ``daikin_arc417``, ``daikin_arc480``, ``daikin``, ``electroluxyal``, ``fuego``, ``fujitsu_awyz``, ``gree``, ``greeya``, ``greeyac``, ``greeyan``, ``hisense_aud``, ``hitachi``, ``hyundai``, ``ivt``, ``midea``, ``mitsubishi_fa``, ``mitsubishi_fd``, ``mitsubishi_fe``, ``mitsubishi_heavy_fdtc``, ``mitsubishi_heavy_zj``, ``mitsubishi_heavy_zm``, ``mitsubishi_heavy_zmp``, ``mitsubishi_heavy_kj``, ``mitsubishi_msc``, ``mitsubishi_msy``, ``mitsubishi_sez``, ``panasonic_ckp``, ``panasonic_dke``, ``panasonic_jke``, ``panasonic_lke``, ``panasonic_nke``, ``samsung_aqv``, ``samsung_fjm``, ``sharp``, ``toshiba_daiseikai``, ``toshiba``
 - **horizontal_default** (**Required**, string): What to default to when the AC unit's horizontal direction is *not* set to swing. Options are: ``left``, ``mleft``, ``middle``, ``mright``, ``right``, ``auto``
 - **vertical_default** (**Required**, string): What to default to when the AC unit's vertical direction is *not* set to swing. Options are: ``down``, ``mdown``, ``middle``, ``mup``, ``up``, ``auto``
 - **max_temperature** (**Required**, float): The maximum temperature that the AC unit supports being set to.
--- a/components/deep_sleep.rst
+++ b/components/deep_sleep.rst
@ -97,9 +97,20 @@ This action makes the given deep sleep component enter deep sleep immediately.
            id: deep_sleep_1
            sleep_duration: 20min

+
+    # ESP32 can sleep until a specific time of day.
+    on_...:
+      then:
+        - deep_sleep.enter:
+            id: deep_sleep_1
+            until: "16:00:00"
+            time_id: sntp_id
+
 Configuration options:

 - **sleep_duration** (*Optional*, :ref:`templatable <config-templatable>`, :ref:`config-time`): The time duration to stay in deep sleep mode.
+- **until** (*Optional*, string): The time of day to wake up. Only on ESP32.
+- **time_id** (*Optional*, :ref:`config-id`): The ID of the time component to use for the ``until`` option. Only on ESP32.


 .. _deep_sleep-prevent_action:
--- a/components/display/images/tm1637_2devices.png
+++ b/components/display/images/tm1637_2devices.png
--- a/components/display/images/tm1637_3plus_devices.png
+++ b/components/display/images/tm1637_3plus_devices.png
--- a/components/display/images/tm1637_key_connections.png
+++ b/components/display/images/tm1637_key_connections.png
--- a/components/display/index.rst
+++ b/components/display/index.rst
@ -143,8 +143,8 @@ You can view the full API documentation for the rendering engine in the "API Ref

 .. _display-static_text:

-Drawing Static Text
-*******************
+Fonts
+*****

 The rendering engine also has a powerful font drawer which integrates seamlessly into ESPHome.
 Whereas in most Arduino display projects you have to use one of a few pre-defined fonts in very
@ -164,13 +164,44 @@ Next, create a ``font:`` section in your configuration:
        id: my_font
        size: 20

+      # gfonts://family[@weight]
+      - file: "gfonts://Roboto"
+        id: roboto
+        size: 20
+
    display:
      # ...

 Configuration variables:

- **file** (**Required**, string): The path (relative to where the .yaml file is) of the TrueType font
-  file.
+- **file** (**Required**): The path (relative to where the .yaml file is) of the TrueType font
+  file. You can use the ``gfonts://`` short form to use Google Fonts, or use the below structure:
+
+  - **type** (**Required**, string): Can be ``gfonts`` or ``local``.
+
+    **Google Fonts**:
+
+    Each Google Font will be downloaded once and cached for future use.
+
+  - **family** (**Required**, string): The name of the Google Font family.
+  - **weight** (*Optional*, enum): The weight of the font. Can be either the text name or the integer value:
+
+    - **thin**: 100
+    - **extra-light**: 200
+    - **light**: 300
+    - **regular**: 400 (**default**)
+    - **medium**: 500
+    - **semi-bold**: 600
+    - **bold**: 700
+    - **extra-bold**: 800
+    - **black**: 900
+
+  - **italic** (*Optional*, boolean): Whether the font should be italic.
+
+    **Local Fonts**:
+
+  - **path** (**Required**, string): The path (relative to where the .yaml file is) of the TrueType font file.
+
 - **id** (**Required**, :ref:`config-id`): The ID with which you will be able to reference the font later
  in your display code.
 - **size** (*Optional*, int): The size of the font in pt (not pixel!).
@ -190,8 +221,10 @@ Configuration variables:
    to install it using
    ``pip install pillow``.

+Drawing Static Text
+*******************

-Then, in your display code just reference the font like so:
+In your display code, you can render static text by referencing the font and just entering your string:

 .. code-block:: yaml

--- a/components/display/lcd_display.rst
+++ b/components/display/lcd_display.rst
@ -203,6 +203,45 @@ turns off 90 seconds after the last activation of the sensor.
            - lambda: |-
                id(mydisplay).no_backlight();

+User Defined Characters
+-----------------------
+
+The LCD display has the possibility to define up to eight user defined characters occupying the characters
+``0`` to ``7`` and mirrored at ``8`` to ``15`` (i.e. ``\x08`` can be used instead of the ``\0`` that can
+be problematic in strings). Each character has eight lines of five bits, with the first line on the top
+and the most significant bit on the left, meaning that ``0b10000`` followed by six zeros and a ``0b00001``
+defines a dot at the upper left and lower right of the character.
+
+.. code-block:: yaml
+
+    display:
+      - platform: lcd_pcf8574
+        id: mydisplay
+        # ...
+        user_characters:
+          - position: 0
+            data:
+              - 0b00000
+              - 0b01010
+              - 0b00000
+              - 0b00100
+              - 0b00100
+              - 0b10001
+              - 0b01110
+              - 0b00000
+          - position: 7
+            data:
+              - 0b00000
+              - 0b01010
+              - 0b00000
+              - 0b00100
+              - 0b00100
+              - 0b00000
+              - 0b01110
+              - 0b10001
+        lambda: |-
+          it.print("Hello, world \x08 \x07!");
+
 See Also
 --------

--- a/components/display/tm1637.rst
+++ b/components/display/tm1637.rst
@ -48,6 +48,37 @@ Configuration variables:

 .. _display-tm1637_lambda:

+Binary Sensor
+-------------
+
+The TM1637 LED display controller also includes a special circuit with keyboard scan interface and enhanced identification circuit with anti-interference keys.
+This circuit uses the 8 segment lines that also drive the LED display. But combined with the K1 and K2 pins we can add 16 keys that can be used as binary sensors in esphome.
+
+.. figure:: images/tm1637_key_connections.png
+    :align: center
+    :width: 50.0%
+
+    TM1637 display keyboard connections
+
+.. code-block:: yaml
+
+    binary_sensor:
+      - platform: tm1637
+        id: key0
+        name: key1-00
+        tm1637_id: tm1637_display
+        key: 0
+
+Configuration variables:
+************************
+
+- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor.
+- **name** (*Optional*, string): The name for the binary sensor.
+- **tm1637_id** (*Optional*, ::ref:`config-id`): The id of the tm1637 that should be used to scan the keys in case you are using multiple devices.
+- **key** (**Required**, integer): The keycode for the connected key (Seg0 = 0, Seg1 = 1 etc,). Range is from
+  0 to 15.
+- All other options from :ref:`Binary Sensor <config-binary_sensor>`.
+
 Rendering Lambda
 ----------------

@ -125,6 +156,25 @@ The following example creates a typical digital clock with the ``:`` colon flash
          else
            it.strftime("%H%M", id(homeassistant_time).now());

+Connect multiple displays
+-------------------------
+
+To connect multiple TM1636 displays you need as many control lines as you have displays. This is achived by sharing control-lines for clk and dio between displays.
+
+.. figure:: images/tm1637_2devices.png
+    :align: center
+    :width: 50.0%
+
+    Two TM1637 displays on only 2 control lines
+
+When using more than 2 devices like 3 or more you add a control-line for the Dio pin and share this with the next display Clk pin.
+The last displays Dio pin shares the Clk pin of the first display. 
+
+.. figure:: images/tm1637_3plus_devices.png
+    :align: center
+    :width: 50.0%
+
+    Three TM1637 displays on 3 control lines

 See Also
 --------
--- a/components/light/images/sonoff_d1.jpg
+++ b/components/light/images/sonoff_d1.jpg
--- a/components/light/images/sonoff_d1_gpio0.jpg
+++ b/components/light/images/sonoff_d1_gpio0.jpg
--- a/components/light/images/sonoff_d1_serial.jpg
+++ b/components/light/images/sonoff_d1_serial.jpg
--- a/components/light/shelly_dimmer.rst
+++ b/components/light/shelly_dimmer.rst
@ -0,0 +1,99 @@
+Shelly Dimmer
+=============
+
+.. seo::
+    :description: Instructions for setting up a Shelly Dimmer 2.
+    :image: shellydimmer2.jpg
+    
+The ``shelly_dimmer`` component adds support for the dimming and power-metering functionality that can be found the `Shelly Dimmer 2 <https://shelly.cloud/knowledge-base/devices/shelly-dimmer-2/>`_. The interaction with mains is done via an STM32 microcontroller that is flashed with an `open source firmware <https://github.com/jamesturton/shelly-dimmer-stm32>`_.
+A detailed analysis of the Shelly Dimmer 2 hardware is given `here <https://github.com/arendst/Tasmota/issues/6914>`_.
+
+.. figure:: ../../images/shellydimmer2.jpg
+    :align: center
+    :width: 40.0%
+
+
+An example of a configuration of this component:
+
+.. code-block:: yaml
+
+    logger:
+        baud_rate: 0
+
+    uart:
+        tx_pin: 1
+        rx_pin: 3
+        baud_rate: 115200
+    sensor:
+
+    light:
+        - platform: shelly_dimmer
+          name: Shelly Dimmer 2 Light
+          id: thislight
+          power:
+            name: Shelly Dimmer 2 Light Power
+          voltage:
+            name: Shelly Dimmer 2 Light Voltage
+          current:
+            name: Shelly Dimmer 2 Light Current
+          max_brightness: 500
+          firmware:
+            version: "51.6"
+            update: true
+
+
+Configuration variables:
+------------------------
+
+- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
+- **uart_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the UART hub. 
+
+.. note::
+
+    Currently, only the first hardware UART of the ESP is supported, which has to be configured like this:  
+
+    .. code-block:: yaml
+
+        uart:
+            tx_pin: 1
+            rx_pin: 3
+            baud_rate: 115200
+
+
+- **name** (**Required**, string): The name of the light.
+- **leading_edge** (**Optional**, boolean): `Dimming mode <https://en.wikipedia.org/wiki/Dimmer#Solid-state_dimmer>`_: "true" means leading edge, "false" (default) is trailing edge.
+- **min_brightness** (**Optional**, int): Minimum brightness value on a scale from 0..1000, the default is 0.
+- **max_brightness** (**Optional**, int): Maximum brightness value on a scale from 0..1000, the default is 1000.
+- **warmup_brightness** (**Optional**, int): Brightness threshold below which the dimmer switches on later in mains current cycle. `This might help with dimming LEDs <https://github.com/jamesturton/shelly-dimmer-stm32/pull/23>`_. The value is from 0..1000 with an default of 0.
+- **nrst_pin** (**Optional**, :ref:`config-pin`): Pin connected with "NRST" of STM32. The  default is "GPIO5".
+- **boot0_pin** (**Optional**, :ref:`config-pin`): Pin connected with "BOOT0" of STM32. The  default is "GPIO4".
+- **current** (**Optional**): Sensor of the current in Amperes. All options from
+  :ref:`Sensor <config-sensor>`.
+- **voltage** (**Optional**): Sensor of the voltage in Volts. Only accurate if neutral is connected. All options from :ref:`Sensor <config-sensor>`.
+- **power** (**Optional**): Sensor of the active power in Watts. Only accurate if neutral is connected. All options from :ref:`Sensor <config-sensor>`.
+- **firmware**  (**Optional**):
+    - **version**  (**Optional**): Version string of the `firmware <https://github.com/jamesturton/shelly-dimmer-stm32>`_ that will be expected on the microcontroller. The default is "51.6", another known-good firmware is "51.5".
+    - **url** (**Optional**): An URL to download the firmware from. Defaults to github for known firmware versions.
+    - **sha256** (**Optional**):  A hash to compare the downloaded firmware against. Defaults a proper hash of known firmware versions.
+    - **update** (**Optional**):  Should the firmware of the STM be updated if necessary? The default is false.
+
+.. note::
+
+    When flashing Shelly Dimmer with esphome for the first time, flashing the STM firmware is necessary too for the dimmer to work:
+
+    .. code-block:: yaml
+
+        firmware:
+          version: "51.6" #<-- set version here
+          update: true
+
+
+- All other options from :ref:`Light <config-light>`.
+
+
+See Also
+--------
+
+- :doc:`/components/light/index`
+- :apiref:`shelly_dimmer/light/shelly_dimmer.h`
+- :ghedit:`Edit`
--- a/components/light/sonoff_d1.rst
+++ b/components/light/sonoff_d1.rst
@ -0,0 +1,124 @@
+Sonoff D1 Dimmer
+================
+
+.. seo::
+    :description: Instructions for setting up a Sonoff D1 dimmer switch.
+    :image: brightness-medium.svg
+
+The ``sonoff_d1`` light platform creates a simple brightness-only light for the
+hardware found in `Sonoff D1 dimmer <https://itead.cc/product/sonoff-d1-smart-dimmer-switch/>`__. Installations with Sonoff RM433 433MHz radio
+remotes are also supported. Use this component to integrate Sonoff D1 dimmer into
+ESPHome / Home Assistant ecosystem. 
+
+.. figure:: images/sonoff_d1.jpg
+    :align: center
+    :width: 100.0%
+
+    Sonoff D1 dimmer front and back view. Image by `ITEAD <https://itead.cc/product/sonoff-d1-smart-dimmer-switch/>`__.
+
+Sonoff D1 uses another MCU for light dimming and handling of radio commands. 
+It's hooked up to ESP8266 via UART bus with default RX / TX pins being used on
+ESP8266 side. Bi-directional symmetric request / response protocol is implemented
+between ESP8266 and MCU. ``sonoff_d1`` component implements this protocol and
+translates between HA light commands and serial messages. 
+
+For detailed instructions on how to replace the stock firmware with ESPHome see :doc:`/devices/sonoff_s20`.
+You will need to locate GPIO0 pin and serial port. Photos below should help.
+
+.. figure:: images/sonoff_d1_gpio0.jpg
+    :align: center
+    :width: 100.0%
+
+    Photo of GPIO 0, images by `klotzma <https://github.com/arendst/Tasmota/issues/7598#issuecomment-578433417>`__.
+.. figure:: images/sonoff_d1_serial.jpg
+    :align: center
+    :width: 100.0%
+
+    Photo of serial port pins, images by  `klotzma <https://github.com/arendst/Tasmota/issues/7598#issuecomment-578433417>`__.
+
+Before using this components make sure:
+
+- board is configured to ``esp8285``
+- :ref:`UART bus <uart>` is configured with default RX / TX pins and 9600 baud rate
+- :doc:`logger </components/logger>` to the serial port is disabled by setting ``baud_rate`` to ``0``
+- in case you need light state restoration on power up, make sure ``restore_from_flash`` is set to ``true`` in the :doc:`ESP8266 platform </components/esp8266>`
+
+
+This component is useless for devices other than Sonoff D1 dimmer.
+
+.. code-block:: yaml
+
+
+    # Example configuration entry
+    esphome:
+      name: my-d1-dimmer
+  
+    # Restore from flash if you want to keep the last state at power up
+    esp8266:
+      board: esp8285
+      restore_from_flash: true
+
+    # Make sure your WiFi will connect
+    wifi:
+      ssid: "ssid"
+      password: "password"
+
+    # Make sure logging is not using the serial port
+    logger:
+      baud_rate: 0
+
+    # Enable Home Assistant API
+    api:
+
+    # Make sure you can upload new firmware OTA
+    ota:
+
+    # D1 dimmer uses hardware serial port on the default pins @ 9600 bps
+    uart:
+      rx_pin: RX
+      tx_pin: TX
+      baud_rate: 9600
+
+    # And finally the light component
+    # gamma correction equal to zero gives linear scale,
+    # exactly what's needed for this device
+    light:
+      - platform: sonoff_d1
+        use_rm433_remote: False
+        name: Sonoff D1 Dimmer
+        restore_mode: RESTORE_DEFAULT_OFF
+        gamma_correct: 0.0
+        default_transition_length: 1s
+
+
+Configuration variables
+-----------------------
+
+- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
+- **name** (**Required**, string): The name of the light.
+- **use_rm433_remote** (*Optional*, boolean): Set to ``True`` if your setup uses Sonoff RM433
+  or any other radio remote control. Properly setting this parameter allows the platform to
+  identify what to do with incoming UART commands. RF chip is known to catch random commands
+  if not paired with a real remote (so called ghost commands). This problem is observed even 
+  with the stock firmware and most probably is a bug in the MCU firmware or in the RF chip
+  firmware. Setting this to ``False`` instructs the platform to properly ignore such commands
+  and thus prevent unexpected switches or light intensity changes.
+- **min_value** (*Optional*, int): The lowest dimmer value allowed. Acceptable value for your
+  setup will depend on actual light bulbs installed and number of them. Start with the default
+  value and check what will be the minimal brightness bulbs can render. Pay attention that for
+  some dimmable LED lamps minimal turn-on brightness will be higher that the minimal achievable
+  brightness if you just decrease it when lamp is already turned on. Defaults to 0.
+- **max_value** (*Optional*, int): The highest dimmer value allowed. Use this to hard-limit light
+  intensity for your setup. For some bulbs this parameter might be also useful to prevent
+  flickering at high brightness values. Defaults to 100.
+- All other options from :ref:`Light <config-light>`.
+
+
+See Also
+--------
+
+- :doc:`/components/light/index`
+- :doc:`/components/uart`
+- :doc:`/components/logger`
+- :doc:`/components/esp8266`
+- :ghedit:`Edit`
--- a/components/mqtt.rst
+++ b/components/mqtt.rst
@ -24,6 +24,12 @@ in which case this is not needed.
      username: livingroom
      password: !secret mqtt_password

+
+.. note::
+
+    Support for esp-idf is still experminental. Please report issues you have with mqtt using the esp-idf framework.
+
+
 Configuration variables:
 ------------------------

@ -71,8 +77,13 @@ Configuration variables:
 - **shutdown_message** (*Optional*, :ref:`mqtt-message`): The message to send when
  the node shuts down and the connection is closed cleanly. See :ref:`mqtt-last_will_birth` for more information.
 - **ssl_fingerprints** (*Optional*, list): Only on ESP8266. A list of SHA1 hashes used
-  for verifying SSL connections. See :ref:`mqtt-ssl_fingerprints`
+  for verifying SSL connections. See :ref:`mqtt-ssl_fingerprints`.
  for more information.
+- **certificate_authority** *(Optional*, string): Only with `esp-idf`. CA certificate in PEM format. See :ref:`mqtt-tls-idf` for more information
+- **skip_cert_cn_check** (*Optional*, bool): Only with `esp-idf`. Don't verify if the common name in the server certificate matches the value of ``broker``.
+- **idf_send_async** (*Optional*, bool): Only with `esp-idf`. Default is false. If true publishing the message happens from the internal mqtt task. The client only enqueues the message. 
+  The advantage of asyncronous publishing is that it doesn't block the esphome main thread. The disadvantage is a delay (up to 1-2 seconds) until the messages are actually sent out.
+  Set this to true if ypi send large amounts of of data over mqtt. 
 - **reboot_timeout** (*Optional*, :ref:`config-time`): The amount of time to wait before rebooting when no
  MQTT connection exists. Can be disabled by setting this to ``0s``. Defaults to ``15min``.
 - **keepalive** (*Optional*, :ref:`config-time`): The time
@ -262,6 +273,56 @@ then run the ``mqtt-fingerprint`` script of ESPHome to get the certificate:

 .. _config-mqtt-component:

+
+.. _mqtt-tls-idf:
+
+TLS with esp-idf (esp32)
+------------------------
+
+If used with the esp-idf framework a TLS connection to a mqtt broker can be established. 
+The servers CA certificate is required to validate the connection. 
+
+You have to download the server CA certficiate in PEM format and add it to ``certificate_authority``.
+Usually these are .crt files and you can open them with any text editor. 
+Also make sure to change the ``port`` of the mqtt broker. Most brokers use port 8883 for TLS connections.
+
+.. code-block:: yaml
+
+    mqtt:
+      broker: test.mymqtt.local
+      port: 8883
+      discovery: true
+      discovery_prefix: ${mqtt_prefix}/homeassistant
+      log_topic: ${mqtt_prefix}/logs 
+      skip_cert_cn_check: true
+      idf_send_async: false
+      certificate_authority: |
+        -----BEGIN CERTIFICATE-----
+        MIIEAzCCAuugAwIBAgIUBY1hlCGvdj4NhBXkZ/uLUZNILAwwDQYJKoZIhvcNAQEL
+        BQAwgZAxCzAJBgNVBAYTAkdCMRcwFQYDVQQIDA5Vbml0ZWQgS2luZ2RvbTEOMAwG
+        A1UEBwwFRGVyYnkxEjAQBgNVBAoMCU1vc3F1aXR0bzELMAkGA1UECwwCQ0ExFjAU
+        BgNVBAMMDW1vc3F1aXR0by5vcmcxHzAdBgkqhkiG9w0BCQEWEHJvZ2VyQGF0Y2hv
+        by5vcmcwHhcNMjAwNjA5MTEwNjM5WhcNMzAwNjA3MTEwNjM5WjCBkDELMAkGA1UE
+        BhMCR0IxFzAVBgNVBAgMDlVuaXRlZCBLaW5nZG9tMQ4wDAYDVQQHDAVEZXJieTES
+        MBAGA1UECgwJTW9zcXVpdHRvMQswCQYDVQQLDAJDQTEWMBQGA1UEAwwNbW9zcXVp
+        dHRvLm9yZzEfMB0GCSqGSIb3DQEJARYQcm9nZXJAYXRjaG9vLm9yZzCCASIwDQYJ
+        KoZIhvcNAQEBBQADggEPADCCAQoCggEBAME0HKmIzfTOwkKLT3THHe+ObdizamPg
+        UZmD64Tf3zJdNeYGYn4CEXbyP6fy3tWc8S2boW6dzrH8SdFf9uo320GJA9B7U1FW
+        Te3xda/Lm3JFfaHjkWw7jBwcauQZjpGINHapHRlpiCZsquAthOgxW9SgDgYlGzEA
+        s06pkEFiMw+qDfLo/sxFKB6vQlFekMeCymjLCbNwPJyqyhFmPWwio/PDMruBTzPH
+        3cioBnrJWKXc3OjXdLGFJOfj7pP0j/dr2LH72eSvv3PQQFl90CZPFhrCUcRHSSxo
+        E6yjGOdnz7f6PveLIB574kQORwt8ePn0yidrTC1ictikED3nHYhMUOUCAwEAAaNT
+        MFEwHQYDVR0OBBYEFPVV6xBUFPiGKDyo5V3+Hbh4N9YSMB8GA1UdIwQYMBaAFPVV
+        6xBUFPiGKDyo5V3+Hbh4N9YSMA8GA1UdEwEB/wQFMAMBAf8wDQYJKoZIhvcNAQEL
+        BQADggEBAGa9kS21N70ThM6/Hj9D7mbVxKLBjVWe2TPsGfbl3rEDfZ+OKRZ2j6AC
+        6r7jb4TZO3dzF2p6dgbrlU71Y/4K0TdzIjRj3cQ3KSm41JvUQ0hZ/c04iGDg/xWf
+        +pp58nfPAYwuerruPNWmlStWAXf0UTqRtg4hQDWBuUFDJTuWuuBvEXudz74eh/wK
+        sMwfu1HFvjy5Z0iMDU8PUDepjVolOCue9ashlS4EB5IECdSR2TItnAIiIwimx839
+        LdUdRudafMu5T5Xma182OC0/u/xRlEm+tvKGGmfFcN0piqVl8OrSPBgIlb+1IKJE
+        m/XriWr/Cq4h/JfB7NTsezVslgkBaoU=
+        -----END CERTIFICATE-----
+
+
 MQTT Component Base Configuration
 ---------------------------------

--- a/components/remote_receiver.rst
+++ b/components/remote_receiver.rst
@ -40,7 +40,8 @@ Configuration variables:
  - **nexa**: Decode and dump Nexa (RF) codes.
  - **panasonic**: Decode and dump Panasonic infrared codes.
  - **pioneer**: Decode and dump Pioneer infrared codes.
-  - **raw**: Print all remote codes in their raw form. Useful for using arbitrary protocols.
+  - **pronto**: Print remote code in Pronto form. Useful for using arbitrary protocols.
+  - **raw**: Print all remote codes in their raw form. Also useful for using arbitrary protocols.
  - **rc5**: Decode and dump RC5 IR codes.
  - **rc_switch**: Decode and dump RCSwitch RF codes.
  - **samsung**: Decode and dump Samsung infrared codes.
@ -101,6 +102,9 @@ Automations:
 - **on_pioneer** (*Optional*, :ref:`Automation <automation>`): An automation to perform when a
  pioneer remote code has been decoded. A variable ``x`` of type :apistruct:`remote_base::PioneerData`
  is passed to the automation for use in lambdas.
+- **on_pronto** (*Optional*, :ref:`Automation <automation>`): An automation to perform when a
+  Pronto remote code has been decoded. A variable ``x`` of type ``std::string``
+  is passed to the automation for use in lambdas.
 - **on_raw** (*Optional*, :ref:`Automation <automation>`): An automation to perform when a
  raw remote code has been decoded. A variable ``x`` of type ``std::vector<int>``
  is passed to the automation for use in lambdas.
@ -213,6 +217,11 @@ Remote code selection (exactly one of these has to be included):

  - **rc_code_1** (**Required**, int): The remote control code to trigger on, see dumper output for more details.

+- **pronto**: Trigger on a Pronto remote code with the given code.
+
+  - **data** (**Required**, string): The code to listen for, see :ref:`remote_transmitter-transmit_raw`
+    for more info. Usually you only need to copy this directly from the dumper output.
+
 - **raw**: Trigger on a raw remote code with the given code.

  - **code** (**Required**, list): The code to listen for, see :ref:`remote_transmitter-transmit_raw`
--- a/components/sensor/growatt_solar.rst
+++ b/components/sensor/growatt_solar.rst
@ -34,6 +34,7 @@ to some pins on your board and the baud rate set to 9600.
    sensor:
      - platform: growatt_solar
        update_interval: 10s
+        protocol_version: RTU
        
        inverter_status:
          name: "Growatt Status Code"
@ -102,6 +103,9 @@ Configuration variables:

 - **inverter_status** (*Optional*): Status code of the inverter (0: waiting, 1: normal, 3:fault)

+- **protocol_version** (*Optional*): Version of the protocol used by your inverter. 
+  Old inverters use RTU (default). Newer ones use RTU2 (e.g. MIC, MIN, MAX series)
+
 - **phase_a** (*Optional*): The group of exposed sensors for Phase A/1.

  - **current** (*Optional*): Use the current value of the sensor in amperes. All options from
--- a/components/sensor/hydreon_rgxx.rst
+++ b/components/sensor/hydreon_rgxx.rst
@ -0,0 +1,114 @@
+Hydreon Rain Sensor
+===================
+
+.. seo::
+    :description: Instructions for setting up Hydreon rain sensors
+    :image: hydreon_rg9.jpg
+    :keywords: hydreon
+
+The ``hydreon_rgxx`` sensor platform allows you to use rain sensors by Hydreon. Currently supported are the RG-9 and RG-15 (`rainsensors <https://rainsensors.com/products/model-comparison/>`_) sensors.
+These optical rain sensors use a UART connection at 3.3V. The :ref:`UART <uart>` is
+required to be set up in your configuration for this sensor to work.
+
+
+.. figure:: images/hydreon_rg9_full.jpg
+    :align: center
+    :width: 50.0%
+
+    Hydreon RG-9 Rain Sensor. Image by `Hydreon <https://rainsensors.com/products/rg-9/>`_.
+
+.. code-block:: yaml
+
+    # Example RG-9 entry
+    
+    uart:
+      rx_pin: GPIO16
+      tx_pin: GPIO17
+      baud_rate: 9600
+
+    sensor:
+      - platform: hydreon_rgxx
+        model: "RG_9"
+        update_interval: 60s
+        moisture:
+          name: "rain"
+          expire_after: 120s  
+          
+    binary_sensor:
+      - platform: hydreon_rgxx
+        too_cold:
+          name: "too cold"
+
+.. code-block:: yaml
+
+    # Example RG-15 entry
+
+    uart:
+      rx_pin: GPIO16
+      tx_pin: GPIO17
+      baud_rate: 9600
+
+    sensor:
+      - platform: hydreon_rgxx
+        model: "RG_15"
+        update_interval: 60s
+        acc:
+          name: "rain"
+        event_acc:
+          name: "rain event"
+        total_acc:
+          name: "rain total"
+        r_int:
+          name: "rain intensity"
+
+Configuration variables:
+------------------------
+
+- **model**: (**Required**, int): Specify which rain sensor you have connected. Must be either ``RG_9`` or ``RG_15``.
+
+- **uart_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the :ref:`UART Component <uart>` if you want
+  to use multiple UART buses.
+
+- **moisture** (*Optional*): Rain intensity level from 0-7. Only on RG-9.
+
+  - **name** (**Required**, string): The name for the voltage sensor.
+  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
+  - All other options from :ref:`Sensor <config-sensor>`.
+
+- **acc** (*Optional*): Amount of rain since last message (see `update_interval`), in `mm`. Only on RG-15.
+
+  - **name** (**Required**, string): The name for the voltage sensor.
+  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
+  - All other options from :ref:`Sensor <config-sensor>`.
+
+- **event_acc** (*Optional*): Amount of rain for this event (i.e. since it last stopped raining), in `mm`. Only on RG-15.
+
+  - **name** (**Required**, string): The name for the voltage sensor.
+  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
+  - All other options from :ref:`Sensor <config-sensor>`.
+
+- **total_acc** (*Optional*): Total amount of rain this sensor has ever measured, in `mm`. Only on RG-15.
+
+  - **name** (**Required**, string): The name for the voltage sensor.
+  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
+  - All other options from :ref:`Sensor <config-sensor>`.
+
+- **r_int** (*Optional*): Current rain intensity in `mm/h`. Only on RG-15.
+
+  - **name** (**Required**, string): The name for the voltage sensor.
+  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
+  - All other options from :ref:`Sensor <config-sensor>`.
+
+- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the sensor. Defaults to ``60s``.
+
+
+See Also
+--------
+
+- :ref:`sensor-filters`
+- :doc:`../binary_sensor/hydreon_rgxx`
+- `Hydreon RG-9 <https://rainsensors.com/products/rg-9/>`__
+- `Hydreon RG-15 <https://rainsensors.com/products/rg-15/>`__
+- `RG-15 V1.000 manual <https://rainsensors.com/wp-content/uploads/sites/3/2020/07/rg-15_instructions_sw_1.000.pdf>`__
+- `RG-9 V1.000 manual <https://rainsensors.com/wp-content/uploads/sites/3/2021/03/2020.08.25-rg-9_instructions.pdf>`__
+- :ghedit:`Edit`
--- a/components/sensor/images/hydreon_rg9_full.jpg
+++ b/components/sensor/images/hydreon_rg9_full.jpg
--- a/components/sensor/images/xiaomi_rtcgq02lm.jpg
+++ b/components/sensor/images/xiaomi_rtcgq02lm.jpg
--- a/components/sensor/mcp3204.rst
+++ b/components/sensor/mcp3204.rst
@ -1,14 +1,15 @@
-MCP3204 4-Channel 12-Bit A/D Converter
-======================================
+MCP3204 & MCP3208 12-Bit A/D Converters
+=======================================

 .. seo::
-    :description: Instructions for setting up MCP3204 12-Bit Analog to Digital Converter in ESPHome.
-    :keywords: MCP3204
+    :description: Instructions for setting up MCP3204 & MCP3208 12-Bit Analog to Digital Converter in ESPHome.
+    :keywords: MCP3204 MCP3208
    :image: mcp3204.jpg

-The Microchip Technology Inc. MCP3204
+The Microchip Technology Inc. MCP3204 & MCP3208
 devices are successive approximation 12-bit Analog-to-Digital (A/D) converters with on-board sample and
-hold circuitry.
+hold circuitry. This integration is common for both device types.
+configure both devices as MCP3204 and observe the maximum number of channels as per variant used.

 .. figure:: images/mcp3204.jpg
    :align: center
@ -19,17 +20,18 @@ hold circuitry.
 Component/Hub
 -------------

-The MCP3204 component allows you to use MCP3204 4-Channel 12-Bit A/D Converter
+The MCP3204 component allows you to use MCP3204 or MCP3208 12-Bit A/D Converter
 (`datasheet <https://ww1.microchip.com/downloads/en/DeviceDoc/21298e.pdf>`__) in ESPHome.
+The MCP3204 is a 4-channel and MCP3208 is an 8-channel device.
 It uses the :ref:`SPI Bus <spi>` for communication.

-Once configured, you can use any of the 4 pins as
+Once configured, you can use any of the 4 or 8 pins (depending on device variant) as
 sensors for your projects.

 Each pin will respond with a voltage calculated off of the ``reference_voltage`` (default is 3.3V).
 It calculates the voltage by multiplying the ``reference_voltage * value`` on the pin (basically the percentage of VREF)

-Most configurations will set the ``reference_voltage`` = VREF (pin 13 on the chip)
+Most configurations will set the ``reference_voltage`` = VREF pin

 .. code-block:: yaml

@ -47,6 +49,12 @@ Most configurations will set the ``reference_voltage`` = VREF (pin 13 on the chi
        id: solar_voltage
        number: 0                     # MCP3204 pin number

+    # In case MCP3208 is used. you can specify pin number > 4
+      - platform: mcp3204             # Attached to pin 7 of the MCP3208.
+        update_interval: 1s
+        id: supply_voltage
+        number: 7                     # MCP3208 pin number
+

 Configuration variables:
 ************************
@ -59,8 +67,8 @@ Configuration variables:
 Sensor
 ------

-The ``mcp3204`` sensor allows you to use your MCP3204 12-Bit A/D Converter sensors with ESPHome.
-First, setup a :ref:`MCP3204 Hub <mcp3204-component>` for your MCP3204 sensor and then use this
+The ``mcp3204`` sensor allows you to use your MCP3204 or MCP3208 12-Bit A/D Converter sensors with ESPHome.
+First, setup a :ref:`MCP3204 Hub <mcp3204-component>` for your MCP3204/8 sensor and then use this
 sensor platform to create individual sensors that will report the voltage to Home Assistant.

 Configuration variables:
--- a/components/sensor/qmp6988.rst
+++ b/components/sensor/qmp6988.rst
@ -0,0 +1,86 @@
+QMP6988 Temperature+Pressure Sensor
+===================================
+
+.. seo::
+    :description: Instructions for setting up QMP6988 temperature and pressure sensors with ESPHome
+    :keywords: QMP6988
+
+The ``qmp6988`` sensor platform allows you to use your QMP6988
+(`datasheet <https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/unit/enviii/QMP6988%20Datasheet.pdf>`__,
+`M5Stack`_) temperature and pressure sensors with ESPHome. The :ref:`I²C <i2c>` is
+required to be set up in your configuration for this sensor to work.
+
+.. figure:: ../../images/qmp6988_env3.png
+    :align: center
+    :width: 40.0%
+
+    QMP6988 Temperature and Pressure Sensor.
+
+.. _M5Stack: https://docs.m5stack.com/en/unit/envIII
+
+.. code-block:: yaml
+
+    # Example configuration entry
+    sensor:
+      - platform: qmp6988
+        temperature:
+          name: "Living Room Temperature"
+          oversampling: 16x
+        pressure:
+          name: "Living Room Pressure"
+          oversampling: 16x
+        address: 0x70
+        update_interval: 60s
+        iir_filter: 2x
+
+Configuration variables:
+------------------------
+
+- **temperature** (*Optional*): The information for the temperature sensor
+
+  - **name** (**Required**, string): The name for the temperature
+    sensor.
+  - **oversampling** (*Optional*): The oversampling parameter for the temperature sensor.
+    See :ref:`Oversampling Options <qmp6988-oversampling>`.
+  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
+  - All other options from :ref:`Sensor <config-sensor>`.
+
+- **pressure** (*Optional*): The information for the pressure sensor.
+
+  - **name** (**Required**, string): The name for the pressure sensor.
+  - **oversampling** (*Optional*): The oversampling parameter for the temperature sensor.
+    See :ref:`Oversampling Options <qmp6988-oversampling>`.
+  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
+  - All other options from :ref:`Sensor <config-sensor>`.
+
+- **address** (*Optional*, int): Manually specify the I²C address of
+  the sensor. Defaults to ``0x70``. ``0x56`` is also configurable - see datasheet.
+- **iir_filter** (*Optional*): Set up an Infinite Impulse Response filter to increase accuracy. One of
+  ``OFF``, ``2x``, ``4x``, ``8x``, ``16x``, ``32x``. Defaults to ``OFF``.
+- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the
+  sensor. Defaults to ``60s``.
+
+.. _qmp6988-oversampling:
+
+Oversampling Options
+--------------------
+
+By default, the QMP6988 sensor has been configured to measure each value 8 times when requesting a new value. You can, however,
+configure this amount. Possible oversampling values:
+
+-  ``NONE`` (value is skipped)
+-  ``1x``
+-  ``2x``
+-  ``4x``
+-  ``8x`` (default)
+-  ``16x`` 
+-  ``32x`` 
+-  ``64x`` 
+
+See Also
+--------
+
+- :ref:`sensor-filters`
+- :apiref:`qmp6988/qmp6988.h`
+- `QMP6988 Library <https://github.com/m5stack/UNIT_ENV>`__ by `M5Stack <https://m5stack.com>`__
+- :ghedit:`Edit`
--- a/components/sensor/xiaomi_ble.rst
+++ b/components/sensor/xiaomi_ble.rst
@ -485,6 +485,43 @@ Configuration example:
        illuminance:
          name: "CGPR1 Illuminance"

+RTCGQ02LM - Mi Motion Sensor 2
+******************************
+
+Motion & ambient light sensor. Broadcasts motion detection, light/dark and battery status. Also has a button that broadcasts when pressed.
+Requires a bindkey in order to decrypt the received data (see :ref:`obtaining_the_bindkey`).
+
+.. figure:: images/xiaomi_rtcgq02lm.jpg
+    :align: center
+    :width: 30.0%
+
+Configuration example:
+
+.. code-block:: yaml
+
+    xiaomi_rtcgq02lm:
+      - id: motion_one
+        mac_address: 01:23:45:67:89:AB
+        bindkey: fe39106baeedb7c801e3d63c4396f97e
+
+    binary_sensor:
+      - platform: xiaomi_rtcgq02lm
+        id: motion_one
+        motion:
+          name: "Mi Motion"
+        light:
+          name: "Mi Motion Sensor Light"
+        button:
+          name: "Mi Motion Sensor Button"
+
+    sensor:
+      - platform: xiaomi_rtcgq02lm
+        id: motion_one
+        battery_level:
+          name: "Mi Motion Sensor Battery Level"
+
+
+
 Setting Up Devices
 ------------------

--- a/conf.py
+++ b/conf.py
@ -66,9 +66,9 @@ author = "ESPHome"
 # built documents.
 #
 # The short X.Y version.
-version = "2022.3"
+version = "2022.4"
 # The full version, including alpha/beta/rc tags.
-release = "2022.3.2"
+release = "2022.4.0"

 # The language for content autogenerated by Sphinx. Refer to documentation
 # for a list of supported languages.
--- a/guides/supporters.rst
+++ b/guides/supporters.rst
@ -55,10 +55,12 @@ Contributors
 - `alva (@alva-seal) <https://github.com/alva-seal>`__
 - `Amish Vishwakarma (@amishv) <https://github.com/amishv>`__
 - `Jason Nader (@ammgws) <https://github.com/ammgws>`__
+- `Branden Cash (@ammmze) <https://github.com/ammmze>`__
 - `anatoly-savchenkov (@anatoly-savchenkov) <https://github.com/anatoly-savchenkov>`__
 - `andig (@andig) <https://github.com/andig>`__
 - `András Bíró (@andrasbiro) <https://github.com/andrasbiro>`__
 - `Andreas Hergert (@andreashergert1984) <https://github.com/andreashergert1984>`__
+- `Andrew J.Swan (@andrewjswan) <https://github.com/andrewjswan>`__
 - `andrewpc (@andrewpc) <https://github.com/andrewpc>`__
 - `Andrzej (@andriej) <https://github.com/andriej>`__
 - `Andreas (@anduchs) <https://github.com/anduchs>`__
@ -115,6 +117,7 @@ Contributors
 - `buddydvd (@buddydvd) <https://github.com/buddydvd>`__
 - `buxtronix (@buxtronix) <https://github.com/buxtronix>`__
 - `bvansambeek (@bvansambeek) <https://github.com/bvansambeek>`__
+- `calco88 (@calco88) <https://github.com/calco88>`__
 - `Carlos Gustavo Sarmiento (@carlos-sarmiento) <https://github.com/carlos-sarmiento>`__
 - `Carlos Garcia Saura (@CarlosGS) <https://github.com/CarlosGS>`__
 - `Carlos Ruiz (@CarlosRDomin) <https://github.com/CarlosRDomin>`__
@ -190,6 +193,7 @@ Contributors
 - `Mark  (@Diramu) <https://github.com/Diramu>`__
 - `Dirk Heinke (@DirkHeinke) <https://github.com/DirkHeinke>`__
 - `Dirk Jahnke (@dirkj) <https://github.com/dirkj>`__
+- `djwlindenaar (@djwlindenaar) <https://github.com/djwlindenaar>`__
 - `Marcos Pérez Ferro (@djwmarcx) <https://github.com/djwmarcx>`__
 - `Dan Mannock (@dmannock) <https://github.com/dmannock>`__
 - `Dmitriy Lopatko (@dmitriy5181) <https://github.com/dmitriy5181>`__
@ -210,6 +214,7 @@ Contributors
 - `Sergey V. DUDANOV (@dudanov) <https://github.com/dudanov>`__
 - `Duncan Findlay (@duncf) <https://github.com/duncf>`__
 - `dyarkovoy (@dyarkovoy) <https://github.com/dyarkovoy>`__
+- `Janez Troha (@dz0ny) <https://github.com/dz0ny>`__
 - `Dimitris Zervas (@dzervas) <https://github.com/dzervas>`__
 - `Dan Jackson (@e28eta) <https://github.com/e28eta>`__
 - `Ermanno Baschiera (@ebaschiera) <https://github.com/ebaschiera>`__
@ -272,6 +277,7 @@ Contributors
 - `Gabe Cook (@gabe565) <https://github.com/gabe565>`__
 - `Gareth Cooper (@gaco79) <https://github.com/gaco79>`__
 - `GeekVisit (@GeekVisit) <https://github.com/GeekVisit>`__
+- `Ian Reinhart Geiser (@geiseri) <https://github.com/geiseri>`__
 - `R Huish (@genestealer) <https://github.com/genestealer>`__
 - `Geoff Davis (@geoffdavis) <https://github.com/geoffdavis>`__
 - `Geoffrey Van Landeghem (@geoffrey-vl) <https://github.com/geoffrey-vl>`__
@ -325,6 +331,7 @@ Contributors
 - `igg (@igg) <https://github.com/igg>`__
 - `Petko Bordjukov (@ignisf) <https://github.com/ignisf>`__
 - `ikatkov (@ikatkov) <https://github.com/ikatkov>`__
+- `Tim Smeets (@ikilledmypc) <https://github.com/ikilledmypc>`__
 - `imgbot[bot] (@imgbot[bot]) <https://github.com/imgbot[bot]>`__
 - `ImSorryButWho (@ImSorryButWho) <https://github.com/ImSorryButWho>`__
 - `Lorenzo Ortiz (@Infinitte) <https://github.com/Infinitte>`__
@ -336,6 +343,7 @@ Contributors
 - `Jan Harkes (@jaharkes) <https://github.com/jaharkes>`__
 - `Jakob Reiter (@jakommo) <https://github.com/jakommo>`__
 - `James Braid (@jamesbraid) <https://github.com/jamesbraid>`__
+- `James Duke (@jamesduke) <https://github.com/jamesduke>`__
 - `James Gao (@jamesgao) <https://github.com/jamesgao>`__
 - `János Rusiczki (@janosrusiczki) <https://github.com/janosrusiczki>`__
 - `Jan Pieper (@janpieper) <https://github.com/janpieper>`__
@ -345,6 +353,7 @@ Contributors
 - `Jas Strong (@jasstrong) <https://github.com/jasstrong>`__
 - `Jonas Bergler (@jbergler) <https://github.com/jbergler>`__
 - `JbLb (@jblb) <https://github.com/jblb>`__
+- `Jonathan Burns (@jburns20) <https://github.com/jburns20>`__
 - `James Callaghan (@jcallaghan) <https://github.com/jcallaghan>`__
 - `Josh Willox (@jcwillox) <https://github.com/jcwillox>`__
 - `jddonovan (@jddonovan) <https://github.com/jddonovan>`__
@ -357,6 +366,7 @@ Contributors
 - `Jérôme Laban (@jeromelaban) <https://github.com/jeromelaban>`__
 - `Jesse Hills (@jesserockz) <https://github.com/jesserockz>`__
 - `Yuval Brik (@jhamhader) <https://github.com/jhamhader>`__
+- `Joe (@jhansche) <https://github.com/jhansche>`__
 - `Jim Bauwens (@jimbauwens) <https://github.com/jimbauwens>`__
 - `Jérémy JOURDIN (@JJK801) <https://github.com/JJK801>`__
 - `Jonathan Jefferies (@jjok) <https://github.com/jjok>`__
@ -471,6 +481,7 @@ Contributors
 - `matt123p (@matt123p) <https://github.com/matt123p>`__
 - `Matteo Franceschini (@matteofranceschini) <https://github.com/matteofranceschini>`__
 - `Matthew Mazzanti (@matthewmazzanti) <https://github.com/matthewmazzanti>`__
+- `matthias882 (@matthias882) <https://github.com/matthias882>`__
 - `Maurice Schleußinger (@maurice-schleussinger) <https://github.com/maurice-schleussinger>`__
 - `mbo18 (@mbo18) <https://github.com/mbo18>`__
 - `mckaymatthew (@mckaymatthew) <https://github.com/mckaymatthew>`__
@ -514,6 +525,7 @@ Contributors
 - `MrZetor (@MrZetor) <https://github.com/MrZetor>`__
 - `mtl010957 (@mtl010957) <https://github.com/mtl010957>`__
 - `Murilo (@murilobaliego) <https://github.com/murilobaliego>`__
+- `Michel van de Wetering (@mvdwetering) <https://github.com/mvdwetering>`__
 - `Michiel van Turnhout (@mvturnho) <https://github.com/mvturnho>`__
 - `Martin Weinelt (@mweinelt) <https://github.com/mweinelt>`__
 - `myhomeiot (@myhomeiot) <https://github.com/myhomeiot>`__
@ -573,6 +585,7 @@ Contributors
 - `Pablo Clemente Maseda (@paclema) <https://github.com/paclema>`__
 - `Derrick Lyndon Pallas (@pallas) <https://github.com/pallas>`__
 - `Panuruj Khambanonda (PK) (@panuruj) <https://github.com/panuruj>`__
+- `parats15 (@parats15) <https://github.com/parats15>`__
 - `Pasi Suominen (@pasiz) <https://github.com/pasiz>`__
 - `Patrick Felstead (@patfelst) <https://github.com/patfelst>`__
 - `Paul Deen (@PaulAntonDeen) <https://github.com/PaulAntonDeen>`__
@ -613,6 +626,7 @@ Contributors
 - `Richard Miles (@r89m) <https://github.com/r89m>`__
 - `Pär Stålberg (@rabbadab) <https://github.com/rabbadab>`__
 - `Aaron Zhang (@rabbit-aaron) <https://github.com/rabbit-aaron>`__
+- `RadekHvizdos (@RadekHvizdos) <https://github.com/RadekHvizdos>`__
 - `Radim Karniš (@radimkarnis) <https://github.com/radimkarnis>`__
 - `Florian Ragwitz (@rafl) <https://github.com/rafl>`__
 - `Rai-Rai (@Rai-Rai) <https://github.com/Rai-Rai>`__
@ -648,6 +662,7 @@ Contributors
 - `Robbie Page (@rorpage) <https://github.com/rorpage>`__
 - `rotarykite (@rotarykite) <https://github.com/rotarykite>`__
 - `rradar (@rradar) <https://github.com/rradar>`__
+- `rrooggiieerr (@rrooggiieerr) <https://github.com/rrooggiieerr>`__
 - `rspaargaren (@rspaargaren) <https://github.com/rspaargaren>`__
 - `rsumner (@rsumner) <https://github.com/rsumner>`__
 - `Rubén G. (@rubengargar) <https://github.com/rubengargar>`__
@ -715,10 +730,8 @@ Contributors
 - `TBobsin (@TBobsin) <https://github.com/TBobsin>`__
 - `Team Super Panda (@teamsuperpanda) <https://github.com/teamsuperpanda>`__
 - `Ryan Hoffman (@tekmaven) <https://github.com/tekmaven>`__
- `Tempura San (@tempura-san) <https://github.com/tempura-san>`__
 - `testbughub (@testbughub) <https://github.com/testbughub>`__
 - `Greg Lincoln (@tetious) <https://github.com/tetious>`__
- `Thane Gill (@thanegill) <https://github.com/thanegill>`__
 - `Nejc (@thedexboy) <https://github.com/thedexboy>`__
 - `Thomas Eckerstorfer (@TheEggi) <https://github.com/TheEggi>`__
 - `TheGroundZero (@TheGroundZero) <https://github.com/TheGroundZero>`__
@ -749,8 +762,8 @@ Contributors
 - `Tom Price (@tomtom5152) <https://github.com/tomtom5152>`__
 - `tony (@tony-fav) <https://github.com/tony-fav>`__
 - `David Kiliani (@torfbolt) <https://github.com/torfbolt>`__
- `Teemu Simola (@tpssim) <https://github.com/tpssim>`__
 - `Felix Eckhofer (@tribut) <https://github.com/tribut>`__
+- `Trick van Staveren (@trickv) <https://github.com/trickv>`__
 - `Tobias (@tripplet) <https://github.com/tripplet>`__
 - `Troon (@Troon) <https://github.com/Troon>`__
 - `Tyler Bules (@Troublebrewing) <https://github.com/Troublebrewing>`__
@ -770,6 +783,7 @@ Contributors
 - `Nad (@valordk) <https://github.com/valordk>`__
 - `André Lademann (@vergissberlin) <https://github.com/vergissberlin>`__
 - `Víctor Ferrer García (@vicfergar) <https://github.com/vicfergar>`__
+- `Vincèn (@vincegre) <https://github.com/vincegre>`__
 - `VitaliyKurokhtin (@VitaliyKurokhtin) <https://github.com/VitaliyKurokhtin>`__
 - `voibit (@voibit) <https://github.com/voibit>`__
 - `Xuming Feng (@voicevon) <https://github.com/voicevon>`__
@ -808,4 +822,4 @@ Contributors
 - `Michael Labuschke (@zigman79) <https://github.com/zigman79>`__
 - `Christian Zufferey (@zuzu59) <https://github.com/zuzu59>`__

-*This page was last updated March 30, 2022.*
+*This page was last updated April 20, 2022.*
--- a/images/hydreon_rg9.jpg
+++ b/images/hydreon_rg9.jpg
--- a/images/qmp6988_env3.png
+++ b/images/qmp6988_env3.png
--- a/images/shellydimmer2.jpg
+++ b/images/shellydimmer2.jpg
--- a/images/sonoff_d1.jpg
+++ b/images/sonoff_d1.jpg
--- a/images/xiaomi_rtcgq02lm.jpg
+++ b/images/xiaomi_rtcgq02lm.jpg
--- a/index.rst
+++ b/index.rst
@ -209,7 +209,7 @@ Analogue
    ADS1115, components/sensor/ads1115, ads1115.jpg, 4-channel ADC
    CD74HC4067, components/sensor/cd74hc4067, cd74hc4067.jpg, 16-channel analog multiplexer
    MCP3008, components/sensor/mcp3008, mcp3008.jpg, 8-channel ADC
-    MCP3204, components/sensor/mcp3204, mcp3204.jpg, 4-channel ADC
+    MCP3204/MCP3208, components/sensor/mcp3204, mcp3204.jpg, 4-channel ADC
    Resistance, components/sensor/resistance, omega.svg


@ -295,11 +295,13 @@ Environmental
    HDC1080, components/sensor/hdc1080, hdc1080.jpg, Temperature & Humidity
    Honeywell ABP, components/sensor/honeywellabp, honeywellabp.jpg, Pressure & Temperature
    HTU21D / Si7021 / SHT21, components/sensor/htu21d, htu21d.jpg, Temperature & Humidity
+    Hydreon Rain Sensor, components/sensor/hydreon_rgxx, hydreon_rg9.jpg, Rain
    Inkbird IBS-TH1 Mini, components/sensor/inkbird_ibsth1_mini, inkbird_isbth1_mini.jpg, Temperature & Humidity
    MCP9808, components/sensor/mcp9808, mcp9808.jpg, Temperature
    MH-Z19, components/sensor/mhz19, mhz19.jpg, CO2 & Temperature
    MS5611, components/sensor/ms5611, ms5611.jpg, Pressure
    NTC Thermistor, components/sensor/ntc, ntc.jpg, Temperature
+    QMP6988, components/sensor/qmp6988, qmp6988_env3.png, Temperature & Pressure
    RadonEye BLE, components/sensor/radon_eye_ble, radon_eye_logo.png, Radon
    RuuviTag, components/sensor/ruuvitag, ruuvitag.jpg, Temperature & Humidity & Accelerometer
    SCD30, components/sensor/scd30, scd30.jpg, CO2 & Temperature & Humidity
@ -400,6 +402,7 @@ Binary Sensor Components
    Analog Threshold, components/binary_sensor/analog_threshold, analog_threshold.svg
    ESP32 BLE Presence, components/binary_sensor/ble_presence, bluetooth.svg
    ESP32 Touch Pad, components/binary_sensor/esp32_touch, touch.svg
+    Hydreon Rain Sensor Binary Sensor, components/binary_sensor/hydreon_rgxx, hydreon_rg9.jpg
    MPR121  Capacitive Touch Sensor, components/binary_sensor/mpr121, mpr121.jpg
    Nextion Binary Sensor, components/binary_sensor/nextion, nextion.jpg
    Template Binary Sensor, components/binary_sensor/template, description.svg
@ -462,9 +465,11 @@ Light Components
    Light Partition, components/light/partition, color_lens.svg

    Tuya Dimmer, components/light/tuya, tuya.png
+    Shelly Dimmer, components/light/shelly_dimmer, shellydimmer2.jpg    
    Custom Light, components/light/custom, language-cpp.svg

    H-bridge Light, components/light/hbridge, brightness-medium.svg
+    Sonoff D1 Dimmer, components/light/sonoff_d1, sonoff_d1.jpg

 Looking for WS2811 and similar individually addressable lights? Have a look at the
 :doc:`FastLED Light </components/light/fastled>`.
 @ -1 +1 @@
 .3.2
 .4.0