fix kuntze docs (#2698)

Co-authored-by: Samuel Sieb <samuel@sieb.net>
This commit is contained in:
Samuel Sieb 2023-03-08 12:45:56 -08:00 committed by Jesse Hills
parent 5e26f55331
commit f7420c857f
No known key found for this signature in database
GPG Key ID: BEAAE804EFD8E83A
3 changed files with 8 additions and 5 deletions

View File

@ -1,3 +1,5 @@
.. _logger:
Logger Component Logger Component
================ ================

View File

@ -11,7 +11,7 @@ instrument in ESPHome. It uses :ref:`UART <uart>` (ModBUS) for communication.
Once configured you can use sensors as described below for your projects. Once configured you can use sensors as described below for your projects.
.. figure:: ../images/kuntze.jpg .. figure:: ../../images/kuntze.jpg
:align: center :align: center
Kuntze Neon® Multi instrument Kuntze Neon® Multi instrument
@ -30,14 +30,14 @@ The device communicates at ``19200`` baud ``8E1``. To connect to ESPHome, an RS4
transceiver is needed. Choose a type which does not need a trigger to send and transceiver is needed. Choose a type which does not need a trigger to send and
receive data, for example: receive data, for example:
.. figure:: ../images/rs485.jpg .. figure:: ../../images/rs485.jpg
The controller connects to the UART of the MCU. For ESP32 GPIO `16` to `TXD` and `17` The controller connects to the UART of the MCU. For ESP32 GPIO `16` to `TXD` and `17`
to RXD are the default ones but any other pins can be used as well. 3.3V to VCC and GND to GND. to RXD are the default ones but any other pins can be used as well. 3.3V to VCC and GND to GND.
.. warning:: .. warning::
If you are using the :doc:`logger` make sure you are not using the same pins for it or otherwise disable the UART If you are using the :ref:`logger` make sure you are not using the same pins for it or otherwise disable the UART
logging with the ``baud_rate: 0`` option. logging with the ``baud_rate: 0`` option.
Component Component
@ -52,7 +52,7 @@ A configured modbus component is optional. It will be automatically created.
- id: uart_bus - id: uart_bus
tx_pin: GPIO16 tx_pin: GPIO16
rx_pin: GPIO17 rx_pin: GPIO17
baud_rate: 19600 baud_rate: 19200
parity: EVEN parity: EVEN
sensor: sensor:
@ -81,7 +81,7 @@ See Also
-------- --------
- :ref:`uart` - :ref:`uart`
- :doc:`logger` - :ref:`logger`
- :ref:`Sensor <config-sensor>` - :ref:`Sensor <config-sensor>`
- `Kuntze manuals <https://www.kuntze.com/en/downloads-2/>`__ - `Kuntze manuals <https://www.kuntze.com/en/downloads-2/>`__
- `Communication protocol <https://www.kuntze.com/wp-content/uploads/2021/05/2019_Manual_Modbus-RTU_ENG.pdf>`__ - `Communication protocol <https://www.kuntze.com/wp-content/uploads/2021/05/2019_Manual_Modbus-RTU_ENG.pdf>`__

View File

@ -365,6 +365,7 @@ Miscellaneous
uFire ISE sensor, components/sensor/ufire_ise, ufire_ise.png, pH & Temperature uFire ISE sensor, components/sensor/ufire_ise, ufire_ise.png, pH & Temperature
Resol VBus, components/vbus, resol_deltasol_bs_plus.jpg Resol VBus, components/vbus, resol_deltasol_bs_plus.jpg
Person Sensor (SEN21231), components/sensor/sen21231, sen21231.png Person Sensor (SEN21231), components/sensor/sen21231, sen21231.png
Kuntze pool sensor, components/sensor/kuntze, kuntze.jpg
Motion Motion