Merge branch 'current' into next

Doxygen

@@ -38,7 +38,7 @@ PROJECT_NAME           = "ESPHome"
 # could be handy for archiving the generated documentation or if some version
 # control system is used.
 
-PROJECT_NUMBER         = 1.14.1
+PROJECT_NUMBER         = 1.14.2
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer a

Makefile

@@ -1,5 +1,5 @@
 ESPHOME_PATH = ../esphome
-ESPHOME_REF = v1.14.1
+ESPHOME_REF = v1.14.2
 
 .PHONY: html html-strict cleanhtml deploy help webserver Makefile netlify netlify-api api netlify-dependencies svg2png copy-svg2png
 

_static/version

@@ -1 +1 @@
-1.14.1
+1.14.2

changelog/v1.14.0.rst

@@ -141,6 +141,11 @@ Release 1.14.1 - November 2
 - esphome: Add servo missing restore option to codegen :esphomepr:`829`
 - docs: Document missing servo restore option :docspr:`398`
 
+Release 1.14.2 - November 3
+---------------------------
+
+- esphome: Fix weird ESP8266 wifi crashes :esphomepr:`831`
+
 Notable Changes & New Features
 ------------------------------
 

components/binary_sensor/ble_presence.rst

@@ -16,7 +16,6 @@ bluetooth low energy device.
 
     # Example configuration entry
     esp32_ble_tracker:
-      scan_interval: 300s
 
     binary_sensor:
       # Presence based on MAC address

components/display/lcd_display.rst

@@ -46,7 +46,7 @@ As the communication with the :ref:`I²C Bus <i2c>`, you need to have an ``i2c:`
 Configuration variables:
 ************************
 
-- **dimensions** (**Required**, string): The dimensions of the display with ``ROWSxCOLUMNS``. If you're not
+- **dimensions** (**Required**, string): The dimensions of the display with ``COLUMNSxROWS``. If you're not
   sure, power the display up and just count them.
 - **address** (*Optional*, int): The :ref:`I²C <i2c>` address of the PCF8574 chip, defaults to ``0x3F``.
 - **lambda** (*Optional*, :ref:`lambda <config-lambda>`): The lambda to use for rendering the content on the display.
@@ -90,7 +90,7 @@ commonly sold with a PCF8574 chip which only need two lines to the ESP, for that
 Configuration variables:
 ************************
 
-- **dimensions** (**Required**, string): The dimensions of the display with ``ROWSxCOLUMNS``. If you're not
+- **dimensions** (**Required**, string): The dimensions of the display with ``COLUMNSxROWS``. If you're not
   sure, power the display up and just count them.
 - **data_pins** (**Required**, list of :ref:`Pin Schemas <config-pin_schema>`): A list of the data pins you
   have hooked up to the LCD. The list can either be 8 items long (when you have connected all 8 data pins), or

components/sensor/as3935.rst

@@ -11,7 +11,7 @@ The ``as3935`` sensor platform allows you to use your as3935 sensor
 in order to get notified when a thunderstorm is getting close.
 
 The AS3935 can detect the presence of lightning activity and provide an estimation
-on the diestance to the head of the storm. The chip issues a notification through an interrupt
+on the distance to the head of the storm. The chip issues a notification through an interrupt
 pin.
 
 The AS3935 can be configured to use either the SPI **or** I2C protocol for data communication.

components/sensor/ble_rssi.rst

@@ -14,7 +14,6 @@ instructions for setting up this platform.
 
     # Example configuration entry
     esp32_ble_tracker:
-      scan_interval: 300s
 
     sensor:
       # RSSI based on MAC address

conf.py

@@ -72,7 +72,7 @@ author = 'Otto Winter'
 # The short X.Y version.
 version = '1.14'
 # The full version, including alpha/beta/rc tags.
-release = '1.14.1'
+release = '1.14.2'
 
 # The language for content autogenerated by Sphinx. Refer to documentation
 # for a list of supported languages.

cookbook/brilliant-mirabella-genio-smart-plugs.rst

@@ -211,10 +211,144 @@ which these adaptions created by `@cryptelli <https://community.home-assistant.i
         name: Status
 
     switch:
+      - platform: gpio
+        id: red_led
+        pin:
+          number: GPIO4
+          inverted: true
+          
       - platform: gpio
         name: "Mirabella Genio Smart Plug"
         pin: GPIO12
         id: relay
+        
+        # Turn on red LED
+        on_turn_on:
+          - switch.turn_on: red_led
+
+        # Turns off red LED
+        on_turn_off:
+          - switch.turn_off: red_led
+
+3.3 Gosund SP1
+**************
+
+.. code-block:: yaml
+
+    esphome:
+      name: gosund_sp1_smart_plug
+      platform: ESP8266
+      board: esp8285
+
+    wifi:
+      ssid: 'WIFI'
+      password: 'WIFIPASS'
+
+    logger:
+
+    api:
+
+    ota:
+
+    binary_sensor:
+      - platform: gpio
+        pin:
+          number: GPIO3
+          inverted: True
+        name: "Power Button"
+        on_press:
+          - switch.toggle: relay
+
+    switch:
+      - platform: gpio
+        id: led
+        pin: GPIO1
+
+      - platform: gpio
+        name: "Gosund SP1 Smart Plug"
+        pin: GPIO14
+        id: relay
+        on_turn_on:
+          - switch.turn_on: led
+        on_turn_off:
+          - switch.turn_off: led
+
+    sensor:
+      - platform: hlw8012
+        sel_pin:
+          number: GPIO12
+          inverted: True
+        cf_pin: GPIO04
+        cf1_pin: GPIO05
+        current_resistor: 0.00221
+        voltage_divider: 871
+        current:
+          name: "Gosund SP1 Smart Plug current"
+          unit_of_measurement: A
+        voltage:
+          name: "Gosund SP1 Smart Plug Voltage"
+          unit_of_measurement: V
+        power:
+          name: "Gosund SP1 Smart Plug Wattage"
+          unit_of_measurement: W
+          id: "energy_temp_Wattage"
+        change_mode_every: 8
+        update_interval: 10s
+
+Check the following page for calibrating the measurements: :ref:`sensor-filter-calibrate_linear`.
+
+3.4 Topersun WL-SC01 Smart Plug
+*******************************
+
+.. code-block:: yaml
+
+    esphome:
+      name: topersun_smart_plug
+      platform: ESP8266
+      board: esp01_1m
+
+    wifi:
+      ssid: 'WIFI'
+      password: 'WIFIPASS'
+
+    logger:
+
+    api:
+
+    ota:
+
+    binary_sensor:
+      - platform: gpio
+        pin:
+          number: 14
+          mode: INPUT_PULLUP
+          inverted: true
+        name: "Power Button"
+        on_press:
+          - switch.toggle: relay
+
+      - platform: status
+        name: "Status"
+
+    switch:
+      - platform: gpio
+        id: green_led
+        pin:
+          number: GPIO4
+          inverted: true
+
+      - platform: gpio
+        name: "Brilliant Smart Plug"
+        pin: GPIO12
+        id: relay
+
+        # Turn off green LED to show red when turned on.
+        on_turn_on:
+          - switch.turn_off: green_led
+
+        # Turns on the green LED once the plug is turned off.
+        on_turn_off:
+          - switch.turn_on: green_led
 
 4. Adding to Home Assistant
 ---------------------------

guides/diy.rst

@@ -56,6 +56,7 @@ Custom Components & Code
 - `Custom ESPHome Keypad sensor <https://github.com/Syralist/esphomekeypad>`__ by :ghuser:`Syralist`
 - `LINP-Doorbell-g03 Custom Component <https://github.com/pauln/esphome-linp-doorbell-g03>`__ by :ghuser:`pauln`
 - `ESPHome <-> Homebridge <https://www.npmjs.com/package/homebridge-esphome>`__ by `basdelfos <https://www.npmjs.com/~basdelfos>`__
+- `Custom ESPHome for Wofea V10 Alarm <https://github.com/nbergont/wofea_v10_hack>`__ by :ghuser:`nbergont`
 
 Sample Configurations
 ---------------------
@@ -74,3 +75,4 @@ Sample Configurations
 - `LOHAS RGBW/CWWW Smart bulbs <https://www.youtube.com/watch?v=fTb6n6flJIw>`__ by `digiblurDIY <https://www.youtube.com/channel/UC5ZdPKE2ckcBhljTc2R_qNA>`__
 - `ESPHome with MakerLife Weather Station Kit <https://github.com/mkuoppa/esphomeweatherstation>`__ by :ghuser:`mkuoppa`
 - `ESPHome DIY Multisensor Cat Feeder <https://github.com/335iguy/diy-multisensor-cat-feeder>`__ by :ghuser:`335iguy`
+- `ESPHome config for Universal IR Remote ZJ-A1 (russian) <https://kvvhost.ru/2019/10/30/review-firmware-zj-a1-ir-remote/>`__ by `kvvhost <https://kvvhost.ru/>`__