Merge pull request #1162 from esphome/bump-1.18.0b2

1.18.0b2

Doxygen

@@ -38,7 +38,7 @@ PROJECT_NAME           = "ESPHome"
 # could be handy for archiving the generated documentation or if some version
 # control system is used.
 
-PROJECT_NUMBER         = 1.18.0b1
+PROJECT_NUMBER         = 1.18.0b2
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer a

Makefile

@@ -1,5 +1,5 @@
 ESPHOME_PATH = ../esphome
-ESPHOME_REF = v1.18.0b1
+ESPHOME_REF = v1.18.0b2
 
 .PHONY: html html-strict cleanhtml deploy help webserver Makefile netlify netlify-api api netlify-dependencies svg2png copy-svg2png
 

_static/version

@@ -1 +1 @@
-1.18.0b1
+1.18.0b2

changelog/v1.16.0.rst

@@ -387,3 +387,19 @@ All changes
 - docs: Update scd30 docs to show sensors are optional :docspr:`970` by :ghuser:`jesserockz` (cherry-picked)
 - esphome: fix esp8266 remote_transmitter using incorrect timings :esphomepr:`1465` by :ghuser:`hcoohb` (cherry-picked)
 - esphome: rc522 increased retry loop count :esphomepr:`1506` by :ghuser:`glmnet` (cherry-picked)
+
+Past Changelogs
+---------------
+
+.. toctree::
+    :maxdepth: 1
+
+    v1.15.0
+    v1.14.0
+    v1.13.0
+    v1.12.0
+    v1.11.0
+    v1.10.0
+    v1.9.0
+    v1.8.0
+    v1.7.0

changelog/v1.17.0.rst

@@ -221,3 +221,20 @@ All changes
 - docs: Update canbus.rst :docspr:`1115` by :ghuser:`meijerwynand`
 - docs: Update diy.rst :docspr:`1114` by :ghuser:`murilobaliego`
 - docs: Update email addresses :docspr:`1122` by :ghuser:`jesserockz`
+
+Past Changelogs
+---------------
+
+.. toctree::
+    :maxdepth: 1
+
+    v1.16.0
+    v1.15.0
+    v1.14.0
+    v1.13.0
+    v1.12.0
+    v1.11.0
+    v1.10.0
+    v1.9.0
+    v1.8.0
+    v1.7.0

changelog/v1.18.0.rst

@@ -41,6 +41,13 @@ Breaking Changes
 - esphome: Raise minimum python version to 3.7 :esphomepr:`1673` (breaking-change)
 - esphome: Change wifi signal strength unit to dBm :esphomepr:`1734` by :ghuser:`mbo18` (breaking-change)
 
+Beta Fixes
+----------
+
+- docs: Update allowed characters for node names :docspr:`1072` by :ghuser:`pkuehne`
+- docs: Replaced set_password with new_password :docspr:`1157` by :ghuser:`PaulAntonDeen`
+- esphome: Fix build issues for idf 4.2 (Support ESP32-S2) :esphomepr:`1433` by :ghuser:`misery`
+
 All changes
 -----------
 
@@ -103,3 +110,21 @@ All changes
 - docs: add External components docs :docspr:`1107` by :ghuser:`glmnet`
 - esphome: Implement external custom components installing from YAML :esphomepr:`1630` (new-integration)
 - esphome: Update copyright year :esphomepr:`1760` by :ghuser:`bonanitech`
+
+Past Changelogs
+---------------
+
+.. toctree::
+    :maxdepth: 1
+
+    v1.17.0
+    v1.16.0
+    v1.15.0
+    v1.14.0
+    v1.13.0
+    v1.12.0
+    v1.11.0
+    v1.10.0
+    v1.9.0
+    v1.8.0
+    v1.7.0

components/binary_sensor/rc522.rst

@@ -9,7 +9,7 @@ RC522 RFID
 .. _rc522-component:
 
 The ``rc522`` component allows you to use RC522 RFID controllers
-(`datasheet <hthttps://www.nxp.com/docs/en/data-sheet/MFRC522.pdff>`__, `Ali Express <https://es.aliexpress.com/item/1260729519.html>`__)
+(`datasheet <https://www.nxp.com/docs/en/data-sheet/MFRC522.pdf>`__, `Ali Express <https://es.aliexpress.com/item/1260729519.html>`__)
 with ESPHome. ESPHome can read the tag UID from it, every RFID tag comes with a unique
 UID value. Each known tag can be associated to a binary sensor, or you can use the tag information directly.
 See :ref:`rc522-setting_up_tags` for information on how to setup individual binary sensors for this component.

components/climate/ir_climate.rst

@@ -23,7 +23,7 @@ request so it will be added (see FAQ).
 +---------------------------------------+---------------------+----------------------+
 | Daikin                                | ``daikin``          | yes                  |
 +---------------------------------------+---------------------+----------------------+
-| Fujitsu General                       | ``fujitsu_general`` |                      |
+| Fujitsu General                       | ``fujitsu_general`` | yes                  |
 +---------------------------------------+---------------------+----------------------+
 | Mitsubishi                            | ``mitsubishi``      |                      |
 +---------------------------------------+---------------------+----------------------+

components/climate/thermostat.rst

@@ -152,6 +152,9 @@ These temperatures are used when the device first starts up.
 **At least one of** ``default_target_temperature_low`` **and** ``default_target_temperature_high``
 **must be specified.**
 
+``min_temperature`` and ``max_temperature`` from the base climate component **are used to define the range**
+of allowed temperature values in the thermostat component. See :doc:`/components/climate/index`
+
 Heating and Cooling Actions
 ***************************
 
@@ -267,7 +270,9 @@ Advanced Options
 .. note::
 
     While this platform uses the term temperature everywhere, it can also be used to regulate other values.
-    For example, controlling humidity is also possible with this platform.
+    For example, controlling humidity is also possible with this platform. Note that ``min_temperature`` and
+    ``max_temperature`` from the base climate component are used the define the range of adjustability and the
+    defaults will probably not make sense for control of things like humidity. See :doc:`/components/climate/index`
 
 Bang-bang vs. Thermostat
 ------------------------

components/deep_sleep.rst

@@ -82,8 +82,9 @@ This action makes the given deep sleep component enter deep sleep immediately.
 
     on_...:
       then:
-        - deep_sleep.enter: deep_sleep_1
+        - deep_sleep.enter:
-          sleep_duration: 20min
+            id: deep_sleep_1
+            sleep_duration: 20min
 
 Configuration options:
 

components/display/st7735.rst

@@ -34,10 +34,10 @@ There are numerous board types out there. Some initialize differently as well. T
         cs_pin: D1
         dc_pin: D2
         rotation: 0
-        devicewidth: 128
+        device_width: 128
-        deviceheight: 160
+        device_height: 160
-        colstart: 0
+        col_start: 0
-        rowstart: 0
+        row_start: 0
         eightbitcolor: true
         update_interval: 5s
 

components/display/waveshare_epaper.rst

@@ -49,6 +49,11 @@ configuration.
 .. code-block:: yaml
 
     # Example configuration entry
+    font:
+      - file: 'fonts/Comic Sans MS.ttf'
+        id: font1
+        size: 8
+    
     spi:
       clk_pin: D0
       mosi_pin: D1
@@ -62,7 +67,7 @@ configuration.
         model: 2.90in
         full_update_every: 30
         lambda: |-
-          it.print(0, 0, id(font), "Hello World!");
+          it.print(0, 0, id(font1), "Hello World!");
 
 Configuration variables:
 ------------------------
@@ -73,7 +78,7 @@ Configuration variables:
 
   - ``1.54in``
   - ``2.13in`` (not tested)
-  - ``2.13in-ttgo`` (T5_V2.3 tested)
+  - ``2.13in-ttgo`` (T5_V2.3 tested. Also works for Wemos D1 Mini ePaper Shield 2.13 1.0.0 "LOLIN")
   - ``2.13in-ttgo-b73`` (T5_V2.3 with B73 display tested)
   - ``2.13in-ttgo-b1`` (T5_V2.3 with B1 display tested)
   - ``2.70in`` (currently not working with the HAT Rev 2.1 version)

components/esphome.rst

@@ -24,7 +24,7 @@ Configuration variables:
 
 - **name** (**Required**, string): This is the name of the node. It
   should always be unique in your ESPhome network. May only contain lowercase
-  characters, digits, underscores and hyphens. See :ref:`esphome-changing_node_name`.
+  characters, digits and hyphens. See :ref:`esphome-changing_node_name`.
 - **platform** (**Required**, string): The platform your board is on,
   either ``ESP32`` or ``ESP8266``. See :ref:`esphome-arduino_version`.
 - **board** (**Required**, string): The board ESPHome should

components/fingerprint_grow.rst

@@ -106,7 +106,7 @@ Base Configuration:
 - **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 - **sensing_pin** (*Optional*, :ref:`Pin Schema <config-pin_schema>`): Pin connected to the reader's finger detection signal (WAKEUP) output.
 - **password** (*Optional*, int): Password to use for authentication. Defaults to ``0x00``.
-- **set_password** (*Optional*, int): Sets a new password to use for authentication. See :ref:`fingerprint_grow-set_new_password` for more information.
+- **new_password** (*Optional*, int): Sets a new password to use for authentication. See :ref:`fingerprint_grow-set_new_password` for more information.
 - **on_finger_scan_matched** (*Optional*, :ref:`Automation <automation>`): An action to be performed when an enrolled fingerprint is scanned. See :ref:`fingerprint_grow-on_finger_scan_matched`.
 - **on_finger_scan_unmatched** (*Optional*, :ref:`Automation <automation>`): An action to be performed when an unknown fingerprint is scanned. See :ref:`fingerprint_grow-on_finger_scan_unmatched`.
 - **on_enrollment_scan** (*Optional*, :ref:`Automation <automation>`): An action to be performed when a fingerprint is scanned during enrollment. See :ref:`fingerprint_grow-on_enrollment_scan`.
@@ -169,15 +169,15 @@ Setting a New Password
 
     Forgetting the password will render your fingerprint reader unusable!
 
-You can set a new password for your fingerprint reader using the ``set_password:`` configuration option. The password is defined as a 32-bit unsigned integer.
+You can set a new password for your fingerprint reader using the ``new_password:`` configuration option. The password is defined as a 32-bit unsigned integer.
 
 .. code-block:: yaml
 
     fingerprint_grow:
       password: 0x275FE3D2      # Existing password, can be omitted if it's the default of 0x00
-      set_password: 0x72AB96CD  # New password
+      new_password: 0x72AB96CD  # New password
 
-The ``set_password:`` configuration option is meant to be compiled, flashed to the ESP device and run once, after which it's removed and the new password is defined in the ``password:`` configuration option to be compiled and flashed again.
+The ``new_password:`` configuration option is meant to be compiled, flashed to the ESP device and run once, after which it's removed and the new password is defined in the ``password:`` configuration option to be compiled and flashed again.
 
 .. code-block:: yaml
 

components/light/index.rst

@@ -900,10 +900,7 @@ Configuration variables:
 
 - **method** (*Optional*): Listening method, one of ``multicast`` or ``unicast``. Defaults to ``multicast``.
 
-<<<<<<< HEAD
 The udp port esphome is listening on is 5568.
-=======
->>>>>>> current
 
 .. _E1.31: https://www.doityourselfchristmas.com/wiki/index.php?title=E1.31_(Streaming-ACN)_Protocol
 .. _JINX: http://www.live-leds.de/jinx-v1-3-with-resizable-mainwindow-real-dmx-and-sacne1-31/

components/sensor/cse7766.rst

@@ -4,11 +4,12 @@ CSE7766 Power Sensor
 .. seo::
     :description: Instructions for setting up CSE7766 power sensors for the Sonoff Pow R2
     :image: cse7766.png
-    :keywords: cse7766, Sonoff Pow R2
+    :keywords: cse7766, cse7759b, Sonoff Pow R2
 
 The ``cse7766`` sensor platform allows you to use your CSE7766 voltage/current and power sensors
 (`datasheet <http://dl.itead.cc/S31/CSE7766.pdf>`__) sensors with
-ESPHome. This sensor is commonly found in Sonoff POW R2.
+ESPHome. This sensor is commonly found in Sonoff POW R2. CSE7759B is similar to CSE7766
+and works with this integration.
 
 As the communication with the CSE7766 done using UART, you need
 to have an :ref:`UART bus <uart>` in your configuration with the ``rx_pin`` connected to the CSE7766.

components/sensor/hlw8012.rst

@@ -4,11 +4,13 @@ HLW8012 Power Sensor
 .. seo::
     :description: Instructions for setting up HLW8012 power sensors for the Sonoff Pow R1
     :image: hlw8012.png
-    :keywords: HLW8012, Sonoff Pow R1
+    :keywords: HLW8012, CSE7759, BL0937, Sonoff Pow R1
 
 The ``hlw8012`` sensor platform allows you to use your HLW8012 voltage/current and power sensors
 (`datasheet <https://github.com/xoseperez/hlw8012/blob/master/docs/HLW8012.pdf>`__) sensors with
-ESPHome. This sensor is commonly found in Sonoff POWs.
+ESPHome. This sensor is commonly found in Sonoff POWs. CSE7759 and BL0937 are similar to HLW8012
+and work with this integration. Beware that CSE7759B is different and should be used
+with the :doc:`CSE7766 <cse7766>` integration.
 
 This sensor has two data outputs which both encode values using the frequency of a modulated signal: CF and CF1.
 CF's frequency is proportional to the (active) power measured and CF1 is proportional to the current/voltage. Using

components/sensor/pulse_counter.rst

@@ -48,8 +48,9 @@ Configuration variables:
 
 - **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
 
-- **total** (*Optional*): Report the total number of pulses
+- **total** (*Optional*): Report the total number of pulses.
-  All options from :ref:`Sensor <config-sensor>`.
+
+  - All options from :ref:`Sensor <config-sensor>`.
 
 - All other options from :ref:`Sensor <config-sensor>`.
 
@@ -75,7 +76,7 @@ count the light pulses on a power meter, you can do the following:
         unit_of_measurement: 'kW'
         name: 'Power Meter House'
         filters:
-          - multiply: 0.06
+          - multiply: 0.06  # (60s/1000 pulses per kWh)
 
 
 Counting total pulses
@@ -94,13 +95,13 @@ measure the total consumed energy in kWh.
         unit_of_measurement: 'kW'
         name: 'Power Meter House'
         filters:
-          - multiply: 0.06
+          - multiply: 0.06  # (60s/1000 pulses per kWh)
 
         total:
           unit_of_measurement: 'kWh'
           name: 'Energy Meter House'
           filters:
-            - multiply: 0.001
+            - multiply: 0.001  # (1/1000 pulses per kWh)
 
 See Also
 --------

components/wifi.rst

@@ -179,8 +179,8 @@ Configuration variables:
 - **eap** (*Optional*): See :ref:`eap`.
 - **channel** (*Optional*, int): The channel of the network (1-14). If given, only connects to networks
   that are on this channel.
-- **bssid** (*Optional*, string): Optionally define a BSSID (MAC-Address) of the network to connect to.
+- **bssid** (*Optional*, string): The connection's BSSID (MAC address). BSSIDs must consist of six
-  This can be used to further restrict which networks to connect to.
+  two-digit hexadecimal values separated by colon characters ("``:``"). All letters must be in upper case.
 - **hidden** (*Optional*, boolean): Whether this network is hidden. Defaults to false.
   If you add this option you also have to specify ssid.
 - **priority** (*Optional*, float): The priority of this network. After each time, the network with

conf.py

@@ -69,7 +69,7 @@ author = "Otto Winter"
 # The short X.Y version.
 version = "1.18"
 # The full version, including alpha/beta/rc tags.
-release = "1.18.0b1"
+release = "1.18.0b2"
 
 # The language for content autogenerated by Sphinx. Refer to documentation
 # for a list of supported languages.

cookbook/power_meter.rst

@@ -24,6 +24,18 @@ And... that should already be it :)
     :align: center
     :width: 80.0%
 
+.. note::
+
+    Some energy meters have an exposed S0 port (which essentially just is a switch that closes), if
+    that is the case the photodiode can be replaced with the following connection.
+
+    .. code-block::
+
+        S0 ------------ VCC
+        S0 --+-- 10k -- GND
+        .    |
+        .    +--------- GPIO12
+
 For ESPHome, you can then use the
 :doc:`pulse counter sensor </components/sensor/pulse_counter>` using below configuration:
 
@@ -35,7 +47,7 @@ For ESPHome, you can then use the
         unit_of_measurement: 'kW'
         name: 'Power Meter'
         filters:
-          - multiply: 0.06
+          - multiply: 0.06  # (60s/1000 pulses per kWh)
 
 Adjust ``GPIO12`` to match your set up of course. The output from the pulse counter sensor is in
 ``pulses/min`` and we also know that 1000 pulses from the LED should equal 1kWh of power usage.

guides/configuration-types.rst

@@ -248,7 +248,6 @@ added ``board``, and overridden ``name`` substitutions):
       platform: ESP8266
       board: esp01_1m
       includes: []
-      board_flash_mode: dout
       libraries: []
       esp8266_restore_from_flash: false
       build_path: device01

guides/faq.rst

@@ -96,12 +96,12 @@ That's no good. Here are some steps that resolve some problems:
 How to submit an issue report
 -----------------------------
 
-First of all, thank you very much to everybody submitting issue reports! While I try to test ESPHome/yaml as much as
+First of all, thank you very much to everybody submitting issue reports! While we try to test ESPHome/YAML as much as
-I can using my own hardware, I don't own every single device type and mostly only do tests with my own home automation
+we can using our available hardware, we don't own every single device type and rely on testing done by the community 
-system. When doing some changes in the core, it can quickly happen that something somewhere breaks. Issue reports are a
+and the contributors. When doing some changes in the core, it can quickly happen that something somewhere breaks. 
-great way for me to track and (hopefully) fix issues, so thank you!
+Issue reports are a great way for us to track and (hopefully) fix issues, so thank you!
 
-For me to fix the issue quickly, there are some things that would be really helpful:
+For us to fix the issue quickly, there are some things that would be really helpful:
 
 1.  **Just writing "X doesn't work" or "X gives bug" is not helpful!!!** Seriously, how do you expect
     help given just that information?
@@ -121,7 +121,7 @@ It's simple. Run:
 
 .. code-block:: bash
 
-    pip install -U esphome
+    pip3 install -U esphome
     # From docker:
     docker pull esphome/esphome:latest
 
@@ -139,7 +139,7 @@ by installing the tested beta:
 .. code-block:: bash
 
     # For pip-based installs
-    pip install --pre -U esphome
+    pip3 install --pre -U esphome
 
     # For docker-based installs
     docker run [...] -it esphome/esphome:beta livingroom.yaml run
@@ -155,13 +155,13 @@ How do I use the latest bleeding edge version?
 ----------------------------------------------
 
 First, a fair warning that the latest bleeding edge version is not always stable and might have issues.
-If you find some, please do however report them if you have time :)
+If you find some, please do however report them.
 
 To install the dev version of ESPHome:
 
 - In Hass.io: Add the ESPHome repository `https://github.com/esphome/hassio <https://github.com/esphome/hassio>`
   in Add-on store -> Repositories. Then install the add-on  ``ESPHome Dev``
-- From ``pip``: Run ``pip install https://github.com/esphome/esphome/archive/dev.zip``
+- From ``pip``: Run ``pip3 install https://github.com/esphome/esphome/archive/dev.zip``
 - From docker, use the `esphome/esphome:dev <https://hub.docker.com/r/esphome/esphome/tags?page=1&name=dev>`__ image
 
   .. code-block:: bash
@@ -192,7 +192,7 @@ request in the `ESPHome feature request tracker <https://github.com/esphome/feat
 I have a question... How can I contact you?
 -------------------------------------------
 
-Sure! I'd be happy to help :) You can contact me here:
+Sure! We are be happy to help :) You can contact us here:
 
 -  `Discord <https://discord.gg/KhAMKrd>`__
 -  `Home Assistant Community Forums <https://community.home-assistant.io/c/third-party/esphome>`__
@@ -206,8 +206,8 @@ Sure! I'd be happy to help :) You can contact me here:
 My node keeps reconnecting randomly
 -----------------------------------
 
-Jep, that's a known issue. However, it seems to be very low-level and I don't really know
+Jep, that's a known issue. However, it seems to be very low-level and we don't really know
-how to solve it. I'm working on possible workarounds for the issue but currently I do
+how to solve it. We are working on possible workarounds for the issue but currently we do
 not have a real solution.
 
 Some steps that can help with the issue:

guides/supporters.rst

@@ -45,6 +45,7 @@ Contributors
 - `Alex Mekkering (@AlexMekkering) <https://github.com/AlexMekkering>`__
 - `Alex (@alexyao2015) <https://github.com/alexyao2015>`__
 - `Amish Vishwakarma (@amishv) <https://github.com/amishv>`__
+- `andig (@andig) <https://github.com/andig>`__
 - `András Bíró (@andrasbiro) <https://github.com/andrasbiro>`__
 - `Andreas Hergert (@andreashergert1984) <https://github.com/andreashergert1984>`__
 - `Andrzej (@andriej) <https://github.com/andriej>`__
@@ -57,9 +58,11 @@ Contributors
 - `Darius Ratkevičius (@aphex008) <https://github.com/aphex008>`__
 - `Ash McKenzie (@ashmckenzie) <https://github.com/ashmckenzie>`__
 - `Pavel Pletenev (@ASMfreaK) <https://github.com/ASMfreaK>`__
+- `Mike Dunston (@atanisoft) <https://github.com/atanisoft>`__
 - `Achilleas Pipinellis (@axilleas) <https://github.com/axilleas>`__
 - `Kamil Trzciński (@ayufan) <https://github.com/ayufan>`__
 - `Nicholas Peters (@Azimath) <https://github.com/Azimath>`__
+- `Daniel (@azrael783) <https://github.com/azrael783>`__
 - `Florian Mösch (@badbadc0ffee) <https://github.com/badbadc0ffee>`__
 - `balk77 (@balk77) <https://github.com/balk77>`__
 - `Paulus Schoutsen (@balloob) <https://github.com/balloob>`__
@@ -69,6 +72,7 @@ Contributors
 - `Ben Suffolk (@bensuffolk) <https://github.com/bensuffolk>`__
 - `Bierchermuesli (@Bierchermuesli) <https://github.com/Bierchermuesli>`__
 - `Jim Ekman (@blejdfist) <https://github.com/blejdfist>`__
+- `Bob (@Bmooij) <https://github.com/Bmooij>`__
 - `Mauricio Bonani (@bonanitech) <https://github.com/bonanitech>`__
 - `boradwell (@boradwell) <https://github.com/boradwell>`__
 - `Patrik Hermansson (@bphermansson) <https://github.com/bphermansson>`__
@@ -82,13 +86,16 @@ Contributors
 - `Carlos Gustavo Sarmiento (@carlos-sarmiento) <https://github.com/carlos-sarmiento>`__
 - `Carlos Garcia Saura (@CarlosGS) <https://github.com/CarlosGS>`__
 - `cbialobos (@cbialobos) <https://github.com/cbialobos>`__
+- `Ciprian Constantinescu (@cciprian5) <https://github.com/cciprian5>`__
 - `Marco (@cdrfun) <https://github.com/cdrfun>`__
 - `chris-jennings (@chris-jennings) <https://github.com/chris-jennings>`__
+- `Pavel Skuratovich (@Chupaka) <https://github.com/Chupaka>`__
 - `John (@CircuitSetup) <https://github.com/CircuitSetup>`__
 - `Chris Debenham (@cjd) <https://github.com/cjd>`__
 - `Cody James (@codyjamestechnical) <https://github.com/codyjamestechnical>`__
 - `John Coggeshall (@coogle) <https://github.com/coogle>`__
 - `James Crook (@cooljimy84) <https://github.com/cooljimy84>`__
+- `copercini (@copercini) <https://github.com/copercini>`__
 - `Corban Mailloux (@corbanmailloux) <https://github.com/corbanmailloux>`__
 - `Dmitry Berezovsky (@corvis) <https://github.com/corvis>`__
 - `Connor Prussin (@cprussin) <https://github.com/cprussin>`__
@@ -122,6 +129,7 @@ Contributors
 - `Mickaël Le Baillif (@demikl) <https://github.com/demikl>`__
 - `dependabot[bot] (@dependabot[bot]) <https://github.com/dependabot[bot]>`__
 - `Destix (@Destix) <https://github.com/Destix>`__
+- `Dezorian (@Dezorian) <https://github.com/Dezorian>`__
 - `Alain Turbide (@Dilbert66) <https://github.com/Dilbert66>`__
 - `Mark  (@Diramu) <https://github.com/Diramu>`__
 - `Dirk Heinke (@DirkHeinke) <https://github.com/DirkHeinke>`__
@@ -181,6 +189,7 @@ Contributors
 - `Fredrik Erlandsson (@fredrike) <https://github.com/fredrike>`__
 - `Evgeny (@freekode) <https://github.com/freekode>`__
 - `Brett McKenzie (@freerangeeggs) <https://github.com/freerangeeggs>`__
+- `Franck Nijhof (@frenck) <https://github.com/frenck>`__
 - `Fritz Mueller (@fritzm) <https://github.com/fritzm>`__
 - `Marc Egli (@frog32) <https://github.com/frog32>`__
 - `mr G1K (@G1K) <https://github.com/G1K>`__
@@ -227,6 +236,7 @@ Contributors
 - `Jason-nz (@Jason-nz) <https://github.com/Jason-nz>`__
 - `Jason Hines (@jasonehines) <https://github.com/jasonehines>`__
 - `JbLb (@jblb) <https://github.com/jblb>`__
+- `James Callaghan (@jcallaghan) <https://github.com/jcallaghan>`__
 - `Joshua Dadswell (@jdads1) <https://github.com/jdads1>`__
 - `jeff-h (@jeff-h) <https://github.com/jeff-h>`__
 - `Jeff Rescignano (@JeffResc) <https://github.com/JeffResc>`__
@@ -272,6 +282,7 @@ Contributors
 - `KristopherMackowiak (@KristopherMackowiak) <https://github.com/KristopherMackowiak>`__
 - `kroimon (@kroimon) <https://github.com/kroimon>`__
 - `Kendell R (@KTibow) <https://github.com/KTibow>`__
+- `Jakub Šimo (@kubik369) <https://github.com/kubik369>`__
 - `kvvoff (@kvvoff) <https://github.com/kvvoff>`__
 - `Ken Davidson (@kwdavidson) <https://github.com/kwdavidson>`__
 - `Kyle Manna (@kylemanna) <https://github.com/kylemanna>`__
@@ -279,6 +290,7 @@ Contributors
 - `Stefan Lässer (@Laess3r) <https://github.com/Laess3r>`__
 - `Steffen Weinreich (@lairsdragon) <https://github.com/lairsdragon>`__
 - `Fredrik Lindqvist (@Landrash) <https://github.com/Landrash>`__
+- `larsonmpdx (@larsonmpdx) <https://github.com/larsonmpdx>`__
 - `lein1013 (@lein1013) <https://github.com/lein1013>`__
 - `Riku Lindblad (@lepinkainen) <https://github.com/lepinkainen>`__
 - `Juraj Liso (@LiJu09) <https://github.com/LiJu09>`__
@@ -299,6 +311,7 @@ Contributors
 - `Major Péter (@majorpeter) <https://github.com/majorpeter>`__
 - `Manuel Díez (@manutenfruits) <https://github.com/manutenfruits>`__
 - `Marcel van der Veldt (@marcelveldt) <https://github.com/marcelveldt>`__
+- `Marc Teale (@marcteale) <https://github.com/marcteale>`__
 - `marecabo (@marecabo) <https://github.com/marecabo>`__
 - `Marvin Gaube (@margau) <https://github.com/margau>`__
 - `Martynas Griškonis (@Margriko) <https://github.com/Margriko>`__
@@ -310,8 +323,10 @@ Contributors
 - `MasterTim17 (@MasterTim17) <https://github.com/MasterTim17>`__
 - `matikij (@matikij) <https://github.com/matikij>`__
 - `Michel Marti (@matoxp) <https://github.com/matoxp>`__
+- `matt123p (@matt123p) <https://github.com/matt123p>`__
 - `Maurice Schleußinger (@maurice-schleussinger) <https://github.com/maurice-schleussinger>`__
 - `mbo18 (@mbo18) <https://github.com/mbo18>`__
+- `Me No Dev (@me-no-dev) <https://github.com/me-no-dev>`__
 - `Joseph Mearman (@Mearman) <https://github.com/Mearman>`__
 - `Mechotronic (@Mechotronic) <https://github.com/Mechotronic>`__
 - `MeIchthys (@meichthys) <https://github.com/meichthys>`__
@@ -322,6 +337,7 @@ Contributors
 - `Pauline Middelink (@middelink) <https://github.com/middelink>`__
 - `mikosoft83 (@mikosoft83) <https://github.com/mikosoft83>`__
 - `Minideezel (@minideezel) <https://github.com/minideezel>`__
+- `André Klitzing (@misery) <https://github.com/misery>`__
 - `Matthew Edwards (@mje-nz) <https://github.com/mje-nz>`__
 - `Maarten (@mjkl-gh) <https://github.com/mjkl-gh>`__
 - `mjoshd (@mjoshd) <https://github.com/mjoshd>`__
@@ -361,6 +377,7 @@ Contributors
 - `Stanislav Meduna (@numo68) <https://github.com/numo68>`__
 - `Nuno Sousa (@nunofgs) <https://github.com/nunofgs>`__
 - `Chris Nussbaum (@nuttytree) <https://github.com/nuttytree>`__
+- `obrain17 (@obrain17) <https://github.com/obrain17>`__
 - `Dave Walker (@oddsockmachine) <https://github.com/oddsockmachine>`__
 - `Olivér Falvai (@ofalvai) <https://github.com/ofalvai>`__
 - `Omar Ghader (@omarghader) <https://github.com/omarghader>`__
@@ -413,6 +430,7 @@ Contributors
 - `rnauber (@rnauber) <https://github.com/rnauber>`__
 - `Rob Deutsch (@rob-deutsch) <https://github.com/rob-deutsch>`__
 - `Rob de Jonge (@robdejonge) <https://github.com/robdejonge>`__
+- `Robert Alfaro (@robert-alfaro) <https://github.com/robert-alfaro>`__
 - `Robin Smidsrød (@robinsmidsrod) <https://github.com/robinsmidsrod>`__
 - `RockBomber (@RockBomber) <https://github.com/RockBomber>`__
 - `RoganDawes (@RoganDawes) <https://github.com/RoganDawes>`__
@@ -459,6 +477,7 @@ Contributors
 - `Teemu Mikkonen (@T3m3z) <https://github.com/T3m3z>`__
 - `Taigar2015 (@Taigar2015) <https://github.com/Taigar2015>`__
 - `Levente Tamas (@tamisoft) <https://github.com/tamisoft>`__
+- `tantive (@tantive) <https://github.com/tantive>`__
 - `TBobsin (@TBobsin) <https://github.com/TBobsin>`__
 - `Team Super Panda (@teamsuperpanda) <https://github.com/teamsuperpanda>`__
 - `teffcz (@teffcz) <https://github.com/teffcz>`__
@@ -472,6 +491,7 @@ Contributors
 - `Mateusz Soszyński (@TheLastGimbus) <https://github.com/TheLastGimbus>`__
 - `Andrew Quested (@thenameiwantedwastaken) <https://github.com/thenameiwantedwastaken>`__
 - `Zixuan Wang (@TheNetAdmin) <https://github.com/TheNetAdmin>`__
+- `Simon (@theOzzieRat) <https://github.com/theOzzieRat>`__
 - `Florian Gareis (@TheZoker) <https://github.com/TheZoker>`__
 - `Thomas Klingbeil (@thomasklingbeil) <https://github.com/thomasklingbeil>`__
 - `Andrew Thompson (@thompsa) <https://github.com/thompsa>`__
@@ -497,6 +517,7 @@ Contributors
 - `Tuckie (@Tuckie) <https://github.com/Tuckie>`__
 - `Alexey Vlasov (@turbulator) <https://github.com/turbulator>`__
 - `Seppel Hardt (@tuxBurner) <https://github.com/tuxBurner>`__
+- `Thorsten von Eicken (@tve) <https://github.com/tve>`__
 - `tyomikh (@tyomikh) <https://github.com/tyomikh>`__
 - `ukewea (@ukewea) <https://github.com/ukewea>`__
 - `Vc (@Valcob) <https://github.com/Valcob>`__
@@ -530,4 +551,4 @@ Contributors
 - `San (@zhujunsan) <https://github.com/zhujunsan>`__
 - `Christian Zufferey (@zuzu59) <https://github.com/zuzu59>`__
 
-*This page was last updated May 10, 2021.*
+*This page was last updated May 12, 2021.*