Commit Graph

12 Commits

Author SHA1 Message Date
Jesse Hills
1160dc279f
Remove devices on home page and replace with platforms (#2393) 2022-10-27 15:43:17 +13:00
Jesse Hills
75107305c9
Some docs tidy up (#1895) 2022-02-11 11:10:43 +13:00
Oxan van Leeuwen
6d8f24d269
Update devices documentation (#1412) 2021-08-25 13:37:12 +12:00
shaeed
ce7a37e422
Corrected the example pin mapping to GPIO mapping. (#789) 2020-10-06 05:58:00 +13:00
Stefan Lässer
e947978cdc
Not every nodeMCU board supports 12V (#626)
It could destroy the board if users just try and power it using 12V. There are boards that don't support 12V but only up to 5V.
2020-05-28 19:27:37 -03:00
Justahobby01
641fd161a3 Clarify NodeMCU ESP8266 VIN pin (#340)
``VIN``: This pin can be used to use an external power supply with the board. Supply a voltage from
  3.3V to 12V to this pin and the linear voltage regulator on the board will power the board.

changed for more clarity to:

``VIN``: This board can be powered by an external power supply by using this pin. Supply a voltage between
  3.3V to 12V to this pin and the linear voltage regulator on the board will power the board.
2019-10-19 22:07:30 +02:00
thenameiwantedwastaken
075d88444e Proof reading changes (#364)
* Small changes from proofreading.

* Proofreading changes.

* Correction from travis checks

* Update guides/getting_started_command_line.rst

Co-Authored-By: Otto Winter <otto@otto-winter.com>

* More proofreading changes.

* More proofreading changes.

* Minor corrections
2019-10-18 09:22:48 +02:00
Otto Winter
9d6c814991
Remove disqus
They started injecting ads :(
2019-03-24 14:54:58 +01:00
Otto Winter
f4c1d31a1d
Revert "Remove disqus"
This reverts commit 19a22e8b39.
2019-03-06 11:02:03 +01:00
Otto Winter
19a22e8b39
Remove disqus 2019-03-05 20:42:43 +01:00
Otto Winter
59e03981a4
Update next docs 2019-02-16 23:25:23 +01:00
Otto Winter
8d9b0d2375
Netlify (#153)
* Netlify

* Fix

* Faster doxygen

* Update Makefile

* Try without api

* Debug

* Fix

* Update Makefile

* Debug

* Try 1.8.13

* Remove debug

* Update Makefile

* Optimize
2019-02-07 13:54:45 +01:00