12 Commits

Author	SHA1	Message	Date
Jesse Hills	1160dc279f	Remove devices on home page and replace with platforms (#2393)	2022-10-27 15:43:17 +13:00
Jesse Hills	75107305c9	Some docs tidy up (#1895)	2022-02-11 11:10:43 +13:00
Oxan van Leeuwen	6d8f24d269	Update devices documentation (#1412)	2021-08-25 13:37:12 +12:00
shaeed	ce7a37e422	Corrected the example pin mapping to GPIO mapping. (#789)	2020-10-06 05:58:00 +13:00
Stefan Lässer	e947978cdc	Not every nodeMCU board supports 12V (#626) ... It could destroy the board if users just try and power it using 12V. There are boards that don't support 12V but only up to 5V.	2020-05-28 19:27:37 -03:00
Justahobby01	641fd161a3	Clarify NodeMCU ESP8266 VIN pin (#340) ... ``VIN``: This pin can be used to use an external power supply with the board. Supply a voltage from 3.3V to 12V to this pin and the linear voltage regulator on the board will power the board. changed for more clarity to: ``VIN``: This board can be powered by an external power supply by using this pin. Supply a voltage between 3.3V to 12V to this pin and the linear voltage regulator on the board will power the board.	2019-10-19 22:07:30 +02:00
thenameiwantedwastaken	075d88444e	Proof reading changes (#364) ... * Small changes from proofreading. * Proofreading changes. * Correction from travis checks * Update guides/getting_started_command_line.rst Co-Authored-By: Otto Winter <otto@otto-winter.com> * More proofreading changes. * More proofreading changes. * Minor corrections	2019-10-18 09:22:48 +02:00
Otto Winter	9d6c814991	Remove disqus ... They started injecting ads :(	2019-03-24 14:54:58 +01:00
Otto Winter	f4c1d31a1d	Revert "Remove disqus" ... This reverts commit 19a22e8b39.	2019-03-06 11:02:03 +01:00
Otto Winter	19a22e8b39	Remove disqus	2019-03-05 20:42:43 +01:00
Otto Winter	59e03981a4	Update next docs	2019-02-16 23:25:23 +01:00
Otto Winter	8d9b0d2375	Netlify (#153) ... * Netlify * Fix * Faster doxygen * Update Makefile * Try without api * Debug * Fix * Update Makefile * Debug * Try 1.8.13 * Remove debug * Update Makefile * Optimize	2019-02-07 13:54:45 +01:00