AM2320 Temperature+Humidity Sensor ================================== .. seo:: :description: Instructions for setting up AM2320 temperature and humidity sensors :image: am2320.jpg :keywords: am2320 The ``am2320`` Temperature+Humidity sensor allows you to use your AM2320 (`datasheet `__) I²C-based sensor with ESPHome. .. figure:: images/am2320-full.jpg :align: center :width: 50.0% AM2320 Temperature & Humidity Sensor. .. figure:: images/temperature-humidity.png :align: center :width: 80.0% .. note:: Logs might include some warnings about receiving a NACK from the sensor. This is due to a wake call to the sensor which the sensor never acknowledges by design. .. code-block:: yaml # Example configuration entry sensor: - platform: am2320 temperature: name: "Living Room Temperature" humidity: name: "Living Room Humidity" update_interval: 60s Configuration variables: ------------------------ - **temperature** (**Required**): The information for the temperature sensor. - **name** (**Required**, string): The name for the temperature sensor. - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas. - All other options from :ref:`Sensor `. - **humidity** (**Required**): The information for the humidity sensor - **name** (**Required**, string): The name for the humidity sensor. - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas. - All other options from :ref:`Sensor `. - **update_interval** (*Optional*, :ref:`config-time`): The interval to check the sensor. Defaults to ``60s``. See Also -------- - :ref:`sensor-filters` - :doc:`absolute_humidity` - :doc:`dht` - :doc:`dht12` - :doc:`hdc1080` - :doc:`htu21d` - :doc:`sht3xd` - :apiref:`am2320/am2320.h` - `AM2320 Library `__ by `Aleksey `__ - :ghedit:`Edit`