MS5611 Atmospheric Pressure Sensor ================================== .. seo:: :description: Instructions for setting up MS5611 atmospheric pressure sensors. :image: ms5611.jpg :keywords: MS5611 The ``ms5611`` sensor platform allows you to use your MS5611 atmospheric pressure sensors (`hobbytronics`_) temperature and pressure sensors with ESPHome. The :ref:`I²C ` is required to be set up in your configuration for this sensor to work. .. figure:: images/ms5611-full.jpg :align: center :width: 50.0% MS5611 Atmospheric Pressure Sensor .. _hobbytronics: http://www.hobbytronics.co.uk/ms5611-altitude-sensor .. figure:: images/ms5611-ui.png :align: center :width: 80.0% .. code-block:: yaml # Example configuration entry sensor: - platform: ms5611 temperature: name: "Outside Temperature" pressure: name: "Outside Pressure" address: 0x77 update_interval: 60s Configuration variables: ------------------------ - **pressure** (**Required**): The information for the pressure sensor. - **name** (**Required**, string): The name for the pressure sensor. - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas. - All other options from :ref:`Sensor `. - **temperature** (**Required**): The information for the temperature. sensor - **name** (**Required**, string): The name for the temperature sensor. - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas. - All other options from :ref:`Sensor `. - **address** (*Optional*, int): Manually specify the I²C address of the sensor. Defaults to ``0x77``. - **update_interval** (*Optional*, :ref:`config-time`): The interval to check the sensor. Defaults to ``60s``. See Also -------- - :ref:`sensor-filters` - :doc:`bmp280` - :doc:`bme280` - :doc:`bmp085` - `Arduino MS5611 Library `__ by `Korneliusz Jarzębski `__ - :apiref:`ms5611/ms5611.h` - :ghedit:`Edit`