Voice Assistant =============== .. seo:: :description: Instructions for setting up a Voice Assistant in ESPHome. :image: voice-assistant.svg ESPHome devices with a microphone are able to stream the audio to Home Assistant and be processed there by `assist `__. .. note:: Voice Assistant requires Home Assistant 2023.5 or later. .. warning:: Audio and voice components consume a significant amount of resources (RAM, CPU) on the device. **Crashes are likely to occur** if you include too many additional components in your device's configuration. In particular, Bluetooth/BLE components are known to cause issues when used in combination with Voice Assistant and/or other audio components. Configuration: -------------- .. code-block:: yaml microphone: - platform: ... id: mic_id voice_assistant: microphone: mic_id - **microphone** (**Required**, :ref:`config-id`): The :doc:`microphone ` to use for input. - **speaker** (*Optional*, :ref:`config-id`): The :doc:`speaker ` to use to output the response. Cannot be used with ``media_player`` below. - **media_player** (*Optional*, :ref:`config-id`): The :doc:`media_player ` to use to output the response. Cannot be used with ``speaker`` above. - **use_wake_word** (*Optional*, boolean): Enable wake word on the assist pipeline. Defaults to ``false``. - **on_intent_start** (*Optional*, :ref:`Automation `): An automation to perform when intent processing starts. - **on_intent_end** (*Optional*, :ref:`Automation `): An automation to perform when intent processing ends. - **on_listening** (*Optional*, :ref:`Automation `): An automation to perform when the voice assistant microphone starts listening. - **on_start** (*Optional*, :ref:`Automation `): An automation to perform when the assist pipeline is started. - **on_wake_word_detected** (*Optional*, :ref:`Automation `): An automation to perform when the assist pipeline has detected a wake word. - **on_end** (*Optional*, :ref:`Automation `): An automation to perform when the voice assistant is finished all tasks. - **on_stt_end** (*Optional*, :ref:`Automation `): An automation to perform when the voice assistant has finished speech-to-text. The resulting text is available to automations as the variable ``x``. - **on_stt_vad_start** (*Optional*, :ref:`Automation `): An automation to perform when voice activity detection starts speech-to-text processing. - **on_stt_vad_end** (*Optional*, :ref:`Automation `): An automation to perform when voice activity detection ends speech-to-text processing. - **on_tts_start** (*Optional*, :ref:`Automation `): An automation to perform when the voice assistant has started text-to-speech. The text to be spoken is available to automations as the variable ``x``. - **on_tts_end** (*Optional*, :ref:`Automation `): An automation to perform when the voice assistant has finished text-to-speech. A URL containing the audio response is available to automations as the variable ``x``. - **on_tts_stream_start** (*Optional*, :ref:`Automation `): An automation to perform when audio stream (voice response) playback starts. Requires ``speaker`` to be configured. - **on_tts_stream_end** (*Optional*, :ref:`Automation `): An automation to perform when audio stream (voice response) playback ends. Requires ``speaker`` to be configured. - **on_idle** (*Optional*, :ref:`Automation `): An automation to perform when the voice assistant is idle (no other actions/states are in progress). - **on_error** (*Optional*, :ref:`Automation `): An automation to perform when the voice assistant has encountered an error. The error code and message are available to automations as the variables ``code`` and ``message``. - **on_client_connected** (*Optional*, :ref:`Automation `): An automation to perform when Home Assistant has connected and is waiting for Voice Assistant commands. - **on_client_disconnected** (*Optional*, :ref:`Automation `): An automation to perform when Home Assistant disconnects from the Voice Assistant. - **noise_suppression_level** (*Optional*, integer): The noise suppression level to apply to the assist pipeline. Between 0 and 4 inclusive. Defaults to 0 (disabled). - **auto_gain** (*Optional*, dBFS): Auto gain level to apply to the assist pipeline. Between 0dBFS and 31dBFS inclusive. Defaults to 0 (disabled). - **volume_multiplier** (*Optional*, float): Volume multiplier to apply to the assist pipeline. Must be larger than 0. Defaults to 1 (disabled). .. _voice_assistant-actions: Voice Assistant Actions ----------------------- The following actions are available for use in automations: ``voice_assistant.start`` ^^^^^^^^^^^^^^^^^^^^^^^^^ Listens for one voice command then stops. Configuration variables: - **silence_detection** (*Optional*, boolean): Enable silence detection. Defaults to ``true``. - **wake_word** (*Optional*, string): The wake word that was used to trigger the voice assistant when using on-device wake word such as :doc:`/components/micro_wake_word`. Call ``voice_assistant.stop`` to signal the end of the voice command if ``silence_detection`` is set to ``false``. ``voice_assistant.start_continuous`` ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Start listening for voice commands. This will start listening again after the response audio has finished playing. Some errors will stop the cycle. Call ``voice_assistant.stop`` to stop the cycle. ``voice_assistant.stop`` ^^^^^^^^^^^^^^^^^^^^^^^^ Stop listening for voice commands. Voice Assistant Conditions -------------------------- The following conditions are available for use in automations: - ``voice_assistant.is_running`` - Returns true if the voice assistant is currently running. - ``voice_assistant.connected`` - Returns true if the voice assistant is currently connected to Home Assistant. Wake word detection ------------------- See our `example YAML files on GitHub `__ for continuous wake word detection. Push to Talk ------------ Here is an example offering Push to Talk with a :doc:`/components/binary_sensor/index`. .. code-block:: yaml voice_assistant: microphone: ... speaker: ... binary_sensor: - platform: gpio pin: ... on_press: - voice_assistant.start: silence_detection: false on_release: - voice_assistant.stop: Click to Converse ----------------- .. code-block:: yaml voice_assistant: microphone: ... speaker: ... binary_sensor: - platform: gpio pin: ... on_click: - if: condition: voice_assistant.is_running then: - voice_assistant.stop: else: - voice_assistant.start_continuous: See Also -------- - :doc:`microphone/index` - :apiref:`voice_assistant/voice_assistant.h` - :ghedit:`Edit`