Remote Receiver =============== .. seo:: :description: Instructions for setting up remote receiver binary sensors for infrared and RF codes. :image: remote.png :keywords: RF, infrared The ``remote_receiver`` component lets you receive and decode any remote signal, these can for example be infrared remotes or 433MHz signals. The component is split up into two parts: the remote receiver hub which handles setting the pin and some other settings, and individual :ref:`remote receiver binary sensors ` which will trigger when they hear their own configured signal. **See** :ref:`remote-setting-up-infrared` **and** :ref:`remote-setting-up-rf` **for set up guides.** .. code-block:: yaml # Example configuration entry remote_receiver: pin: GPIO32 dump: all Configuration variables: ------------------------ - **pin** (**Required**, :ref:`config-pin`): The pin to receive the remote signal on. - **dump** (*Optional*, list): Decode and dump these remote codes in the logs (at log.level=DEBUG). Set to ``all`` to dump all available codecs: - **lg**: Decode and dump LG infrared codes. - **nec**: Decode and dump NEC infrared codes. - **panasonic**: Decode and dump Panasonic infrared codes. - **pioneer**: Decode and dump Pioneer infrared codes. - **jvc**: Decode and dump JVC infrared codes. - **samsung**: Decode and dump Samsung infrared codes. - **sony**: Decode and dump Sony infrared codes. - **rc_switch**: Decode and dump RCSwitch RF codes. - **rc5**: Decode and dump RC5 IR codes. - **raw**: Print all remote codes in their raw form. Useful for using arbitrary protocols. - **tolerance** (*Optional*, int): The percentage that the remote signal lengths can deviate in the decoding process. Defaults to ``25%``. - **buffer_size** (*Optional*, int): The size of the internal buffer for storing the remote codes. Defaults to ``10kB`` on the ESP32 and ``1kB`` on the ESP8266. - **memory_blocks** (*Optional*, int): The number of RMT memory blocks used. Only used on ESP32 platfrom. Defaults to ``3``. - **filter** (*Optional*, :ref:`time `): Filter any pulses that are shorter than this. Useful for removing glitches from noisy signals. Defaults to ``10us``. - **idle** (*Optional*, :ref:`time `): The amount of time that a signal should remain stable (i.e. not change) for it to be considered complete. Defaults to ``10ms``. - **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation. Use this if you have multiple remote receivers. Automations: - **on_jvc** (*Optional*, :ref:`Automation `): An automation to perform when a JVC remote code has been decoded. A variable ``x`` of type :apiclass:`remote_base::JVCData` is passed to the automation for use in lambdas. - **on_lg** (*Optional*, :ref:`Automation `): An automation to perform when a LG remote code has been decoded. A variable ``x`` of type :apiclass:`remote_base::LGData` is passed to the automation for use in lambdas. - **on_nec** (*Optional*, :ref:`Automation `): An automation to perform when a NEC remote code has been decoded. A variable ``x`` of type :apiclass:`remote_base::NECData` is passed to the automation for use in lambdas. - **on_sony** (*Optional*, :ref:`Automation `): An automation to perform when a Sony remote code has been decoded. A variable ``x`` of type :apiclass:`remote_base::SonyData` is passed to the automation for use in lambdas. - **on_raw** (*Optional*, :ref:`Automation `): An automation to perform when a raw remote code has been decoded. A variable ``x`` of type ``std::vector`` is passed to the automation for use in lambdas. - **on_rc5** (*Optional*, :ref:`Automation `): An automation to perform when a RC5 remote code has been decoded. A variable ``x`` of type :apiclass:`remote_base::RC5Data` is passed to the automation for use in lambdas. - **on_samsung** (*Optional*, :ref:`Automation `): An automation to perform when a Samsung remote code has been decoded. A variable ``x`` of type :apiclass:`remote_base::SamsungData` is passed to the automation for use in lambdas. - **on_panasonic** (*Optional*, :ref:`Automation `): An automation to perform when a Panasonic remote code has been decoded. A variable ``x`` of type :apiclass:`remote_base::PanasonicData` is passed to the automation for use in lambdas. - **on_pioneer** (*Optional*, :ref:`Automation `): An automation to perform when a pioneer remote code has been decoded. A variable ``x`` of type :apiclass:`remote_base::PioneerData` is passed to the automation for use in lambdas. .. _remote-receiver-binary-sensor: Binary Sensor ------------- The ``remote_receiver`` binary sensor lets you track when a button on a remote control is pressed. Each time the pre-defined signal is received, the binary sensor will briefly go ON and then immediately OFF. .. code-block:: yaml # Example configuration entry remote_receiver: pin: GPIO32 dump: all binary_sensor: - platform: remote_receiver name: "Panasonic Remote Input" panasonic: address: 0x4004 command: 0x100BCBD Configuration variables: ************************ - **name** (**Required**, string): The name for the binary sensor. - **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation. - All other options from :ref:`Binary Sensor `. Remote code selection (exactly one of these has to be included): - **jvc**: Trigger on a decoded JVC remote code with the given data. - **data** (**Required**, int): The JVC code to trigger on, see dumper output for more info. - **lg**: Trigger on a decoded LG remote code with the given data. - **data** (**Required**, int): The LG code to trigger on, see dumper output for more info. - **nbits** (*Optional*, int): The number of bits of the remote code. Defaults to ``28``. - **nec**: Trigger on a decoded NEC remote code with the given data. - **address** (**Required**, int): The address to trigger on, see dumper output for more info. - **command** (**Required**, int): The NEC command to listen for. - **sony**: Trigger on a decoded Sony remote code with the given data. - **data** (**Required**, int): The Sony code to trigger on, see dumper output for more info. - **nbits** (*Optional*, int): The number of bits of the remote code. Defaults to ``12``. - **raw**: Trigger on a raw remote code with the given code. - **code** (**Required**, list): The code to listen for, see :ref:`remote_transmitter-transmit_raw` for more info. Usually you only need to copy this directly from the dumper output. - **rc5**: Trigger on a decoded RC5 remote code with the given data. - **address** (**Required**, int): The address to trigger on, see dumper output for more info. - **command** (**Required**, int): The RC5 command to listen for. - **samsung**: Trigger on a decoded Samsung remote code with the given data. - **data** (**Required**, int): The data to trigger on, see dumper output for more info. - **panasonic**: Trigger on a decoded Panasonic remote code with the given data. - **address** (**Required**, int): The address to trigger on, see dumper output for more info. - **command** (**Required**, int): The command. - **pioneer**: Trigger on a decoded Pioneer remote code with the given data. - **rc_code_1** (**Required**, int): The remote control code trigger on, see dumper output for more details. - **rc_switch_raw**: Trigger on a decoded RC Switch raw remote code with the given data. - **code** (**Required**, string): The remote code to listen for, copy this from the dumper output. To ignore a bit in the received data, use ``x`` at that place in the **code**. - **protocol** (*Optional*): The RC Switch protocol to use, see :ref:`remote_transmitter-rc_switch-protocol` for more info. - **rc_switch_type_a**: Trigger on a decoded RC Switch Type A remote code with the given data. - **group** (**Required**, string): The group, binary string. - **device** (**Required**, string): The device in the group, binary string. - **state** (**Required**, boolean): The on/off state to trigger on. - **protocol** (*Optional*): The RC Switch protocol to use, see :ref:`remote_transmitter-rc_switch-protocol` for more info. - **rc_switch_type_b**: Trigger on a decoded RC Switch Type B remote code with the given data. - **address** (**Required**, int): The address, int from 1 to 4. - **channel** (**Required**, int): The channel, int from 1 to 4. - **state** (**Required**, boolean): The on/off state to trigger on. - **protocol** (*Optional*): The RC Switch protocol to use, see :ref:`remote_transmitter-rc_switch-protocol` for more info. - **rc_switch_type_c**: Trigger on a decoded RC Switch Type C remote code with the given data. - **family** (**Required**, string): The family. Range is ``a`` to ``p``. - **group** (**Required**, int): The group. Range is 1 to 4. - **device** (**Required**, int): The device. Range is 1 to 4. - **state** (**Required**, boolean): The on/off state to trigger on. - **protocol** (*Optional*): The RC Switch protocol to use, see :ref:`remote_transmitter-rc_switch-protocol` for more info. - **rc_switch_type_d**: Trigger on a decoded RC Switch Type D remote code with the given data. - **group** (**Required**, int): The group. Range is 1 to 4. - **device** (**Required**, int): The device. Range is 1 to 3. - **state** (**Required**, boolean): The on/off state to trigger on. - **protocol** (*Optional*): The RC Switch protocol to use, see :ref:`remote_transmitter-rc_switch-protocol` for more info. .. note:: For the Sonoff RF Bridge you can use `this hack `__ created by the GitHub user wildwiz. Then use this configuration for the remote receiver/transmitter hubs: .. code-block:: yaml remote_receiver: pin: 4 dump: all remote_transmitter: pin: 5 carrier_duty_percent: 100% See Also -------- - :doc:`index` - :doc:`/components/remote_transmitter` - `RCSwitch `__ by `Suat Özgür `__ - `IRRemoteESP8266 `__ by `Mark Szabo-Simon `__ - :apiref:`remote/remote_receiver.h` - :ghedit:`Edit`