APDS9960 Sensor
===============

.. seo::
    :description: Instructions for setting up APDS9960 sensors.
    :image: apds9960.jpg

The ``apds9960`` sensor platform allows you to use your APDS9960 RGB and gesture sensors
(`datasheet <https://cdn-shop.adafruit.com/datasheets/BST-BME280_DS001-10.pdf>`__,
`SparkFun`_) with ESPHome.
The :ref:`I²C <i2c>` is
required to be set up in your configuration for this sensor to work.

.. figure:: images/apds9960-full.jpg
    :align: center
    :width: 80.0%

    Image by `SparkFun`_.

.. code-block:: yaml

    # Example configuration entry
    apds9960:
      address: 0x39
      update_interval: 60s

    sensor:
      - platform: apds9960
        type: CLEAR
        name: "APDS9960 Clear Channel"

    binary_sensor:
      - platform: apds9960
        direction: UP
        name: "APDS960 Up Movement"
      # Repeat for each direction

.. _SparkFun: https://www.sparkfun.com/products/12787

Configuration variables:
------------------------

The configuration is made up of three parts: The central component, individual sensors,
and direction binary sensors.

Base Configuration:

- **address** (*Optional*, integer): The I2C address of the sensor. Defaults to ``0x39``.
- **update_interval** (*Optional*, :ref:`config-time`): The interval
  to check the sensor. Defaults to ``60s``.

Sensor Configuration:

- **name** (**Required**, string): The name for the sensor.
- **type** (**Required**, string): The type of sensor measurement. One of

  - **CLEAR**
  - **RED**
  - **GREEN**
  - **BLUE**
  - **PROXIMITY**

- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
- All other options from :ref:`Sensor <config-sensor>`.

Binary Sensor Configuration:

- **name** (**Required**, string): The name for the binary sensor.
- **direction** (**Required**, string): The direction to measure. One of:

  - **UP**
  - **DOWN**
  - **LEFT**
  - **RIGHT**

- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
- All other options from :ref:`Binary Sensor <config-binary_sensor>`.

See Also
--------

- :ref:`sensor-filters`
- :apiref:`apds9960/apds9960.h`
- :ghedit:`Edit`