ESP32 Camera Component ====================== .. seo:: :description: Instructions for setting up the ESP32 Cameras in ESPHome :image: camera.png The ``esp32_camera`` component allows you to use ESP32-based camera boards in ESPHome that directly integrate into Home Assistant through the native API. .. code-block:: yaml # Example configuration entry esp32_camera: name: My Camera external_clock: pin: GPIO27 frequency: 20MHz i2c_pins: sda: GPIO25 scl: GPIO23 data_pins: [GPIO17, GPIO35, GPIO34, GPIO5, GPIO39, GPIO18, GPIO36, GPIO19] vsync_pin: GPIO22 href_pin: GPIO26 pixel_clock_pin: GPIO21 reset_pin: GPIO15 resolution: 640x480 jpeg_quality: 10 Configuration variables: ------------------------ - **name** (**Required**, string): The name of the camera. - **disabled_by_default** (*Optional*, boolean): If true, then this entity should not be added to any client's frontend, (usually Home Assistant) without the user manually enabling it (via the Home Assistant UI). Requires Home Assistant 2021.9 or newer. Defaults to ``false``. - **entity_category** (*Optional*, string): The category of the entity. See https://developers.home-assistant.io/docs/core/entity/#generic-properties for a list of available options. Requires Home Assistant 2021.11 or newer. Set to ``""`` to remove the default entity category. Connection Options: - **data_pins** (**Required**, list of pins): The data lanes of the camera, this must be a list of 8 GPIO pins. - **vsync_pin** (**Required**, pin): The pin the VSYNC line of the camera is connected to. - **href_pin** (**Required**, pin): The pin the HREF line of the camera is connected to. - **pixel_clock_pin** (**Required**, pin): The pin the pixel clock line of the camera is connected to. - **external_clock** (**Required**): The configuration of the external clock to drive the camera. - **pin** (**Required**, pin): The pin the external clock line is connected to. - **frequency** (*Optional*, float): The frequency of the external clock, must be either 20MHz or 10MHz. Defaults to ``20MHz``. - **i2c_pins** (**Required**): The I²C control pins of the camera. - **sda** (**Required**, pin): The SDA pin of the I²C interface. Also called ``SIOD``. - **scl** (**Required**, pin): The SCL pin of the I²C interface. Also called ``SIOC``. - **reset_pin** (*Optional*, pin): The ESP pin the reset pin of the camera is connected to. If set, this will reset the camera before the ESP boots. - **power_down_pin** (*Optional*, pin): The ESP pin to power down the camera. If set, this will power down the camera while it is inactive. - **test_pattern** (*Optional*, boolean): When enabled, the camera will show a test pattern that can be used to debug connection issues. Frame Settings: - **max_framerate** (*Optional*, float): The maximum framerate the camera will generate images at. Up to 60Hz is possible (with reduced frame sizes), but beware of overheating. Defaults to ``10 fps``. - **idle_framerate** (*Optional*, float): The framerate to capture images at when no client is requesting a full stream. Defaults to ``0.1 fps``. - **resolution** (*Optional*, enum): The resolution the camera will capture images at. Higher resolutions require more memory, if there's not enough memory you will see an error during startup. - ``160x120`` (QQVGA) - ``176x144`` (QCIF) - ``240x176`` (HQVGA) - ``320x240`` (QVGA) - ``400x296`` (CIF) - ``640x480`` (VGA, default) - ``800x600`` (SVGA) - ``1024x768`` (XGA) - ``1280x1024`` (SXGA) - ``1600x1200`` (UXGA) - **jpeg_quality** (*Optional*, int): The JPEG quality that the camera should encode images with. From 10 (best) to 63 (worst). Defaults to ``10``. - **contrast** (*Optional*, int): The contrast to apply to the picture, from -2 to 2. Defaults to ``0``. - **brightness** (*Optional*, int): The brightness to apply to the picture, from -2 to 2. Defaults to ``0``. - **saturation** (*Optional*, int): The saturation to apply to the picture, from -2 to 2. Defaults to ``0``. - **vertical_flip** (*Optional*, bool): Whether to flip the image vertically. Defaults to ``true``. - **horizontal_mirror** (*Optional*, bool): Whether to mirror the image horizontally. Defaults to ``true``. .. note:: Camera uses PWM timer #1. If you need PWM (via the ``ledc`` platform) you need to manually specify a channel there (with the ``channel: 2`` parameter) Configuration for Ai-Thinker Camera ----------------------------------- .. code-block:: yaml # Example configuration entry esp32_camera: external_clock: pin: GPIO0 frequency: 20MHz i2c_pins: sda: GPIO26 scl: GPIO27 data_pins: [GPIO5, GPIO18, GPIO19, GPIO21, GPIO36, GPIO39, GPIO34, GPIO35] vsync_pin: GPIO25 href_pin: GPIO23 pixel_clock_pin: GPIO22 power_down_pin: GPIO32 # Image settings name: My Camera # ... Configuration for M5Stack Camera -------------------------------- .. warning:: This camera board has insufficient cooling and will overheat over time, ESPHome does only activate the camera when Home Assistant requests an image, but the camera unit can still heat up considerably for some boards. If the camera is not recognized after a reboot and the unit feels warm, try waiting for it to cool down and check again - if that still doesn't work try enabling the test pattern. .. code-block:: yaml # Example configuration entry esp32_camera: external_clock: pin: GPIO27 frequency: 20MHz i2c_pins: sda: GPIO25 scl: GPIO23 data_pins: [GPIO17, GPIO35, GPIO34, GPIO5, GPIO39, GPIO18, GPIO36, GPIO19] vsync_pin: GPIO22 href_pin: GPIO26 pixel_clock_pin: GPIO21 reset_pin: GPIO15 # Image settings name: My Camera # ... Configuration for Wrover Kit Boards ----------------------------------- .. code-block:: yaml # Example configuration entry esp32_camera: external_clock: pin: GPIO21 frequency: 20MHz i2c_pins: sda: GPIO26 scl: GPIO27 data_pins: [GPIO4, GPIO5, GPIO18, GPIO19, GPIO36, GPIO39, GPIO34, GPIO35] vsync_pin: GPIO25 href_pin: GPIO23 pixel_clock_pin: GPIO22 # Image settings name: My Camera # ... Configuration for TTGO T-Camera V05 ----------------------------------- .. code-block:: yaml # Example configuration entry esp32_camera: external_clock: pin: GPIO32 frequency: 20MHz i2c_pins: sda: GPIO13 scl: GPIO12 data_pins: [GPIO5, GPIO14, GPIO4, GPIO15, GPIO18, GPIO23, GPIO36, GPIO39] vsync_pin: GPIO27 href_pin: GPIO25 pixel_clock_pin: GPIO19 power_down_pin: GPIO26 # Image settings name: My Camera # ... Configuration for TTGO T-Camera V162 ------------------------------------ .. code-block:: yaml esp32_camera: external_clock: pin: GPIO4 frequency: 20MHz i2c_pins: sda: GPIO18 scl: GPIO23 data_pins: [GPIO34, GPIO13, GPIO14, GPIO35, GPIO39, GPIO38, GPIO37, GPIO36] vsync_pin: GPIO5 href_pin: GPIO27 pixel_clock_pin: GPIO25 jpeg_quality: 10 vertical_flip: true horizontal_mirror: false # Image settings name: My Camera # ... Configuration for TTGO T-Camera V17 ----------------------------------- .. code-block:: yaml # Example configuration entry esp32_camera: external_clock: pin: GPIO32 frequency: 20MHz i2c_pins: sda: GPIO13 scl: GPIO12 data_pins: [GPIO5, GPIO14, GPIO4, GPIO15, GPIO18, GPIO23, GPIO36, GPIO39] vsync_pin: GPIO27 href_pin: GPIO25 pixel_clock_pin: GPIO19 # power_down_pin: GPIO26 vertical_flip: true horizontal_mirror: true # Image settings name: My Camera # ... Configuration for TTGO T-Journal -------------------------------- .. code-block:: yaml # Example configuration entry esp32_camera: external_clock: pin: GPIO27 frequency: 20MHz i2c_pins: sda: GPIO25 scl: GPIO23 data_pins: [GPIO17, GPIO35, GPIO34, GPIO5, GPIO39, GPIO18, GPIO36, GPIO19] vsync_pin: GPIO22 href_pin: GPIO26 pixel_clock_pin: GPIO21 # Image settings name: My Camera # ... Configuration for TTGO-Camera Plus ---------------------------------- .. code-block:: yaml # Example configuration entry esp32_camera: external_clock: pin: GPIO4 frequency: 20MHz i2c_pins: sda: GPIO18 scl: GPIO23 data_pins: [GPIO34, GPIO13, GPIO26, GPIO35, GPIO39, GPIO38, GPIO37, GPIO36] vsync_pin: GPIO5 href_pin: GPIO27 pixel_clock_pin: GPIO25 vertical_flip: false horizontal_mirror: false # Image settings name: My Camera # ... Configuration for TTGO-Camera Mini ---------------------------------- .. code-block:: yaml # Example configuration entry esp32_camera: external_clock: pin: GPIO32 frequency: 20MHz i2c_pins: sda: GPIO13 scl: GPIO12 data_pins: [GPIO5, GPIO14, GPIO4, GPIO15, GPIO37, GPIO38, GPIO36, GPIO39] vsync_pin: GPIO27 href_pin: GPIO25 pixel_clock_pin: GPIO19 # Image settings name: My Camera # ... Configuration for ESP-EYE ---------------------------------- .. code-block:: yaml # Example configuration entry esp32_camera: external_clock: pin: GPIO4 frequency: 20MHz i2c_pins: sda: GPIO18 scl: GPIO23 data_pins: [GPIO34, GPIO13, GPIO14, GPIO35, GPIO39, GPIO38, GPIO37, GPIO36] vsync_pin: GPIO5 href_pin: GPIO27 pixel_clock_pin: GPIO25 # Image settings name: My Camera # ... See Also -------- - :apiref:`esp32_camera/esp32_camera.h` - :ghedit:`Edit`