SM300D2 7-in-1 Air Quality Sensor
=================================

.. seo::
    :description: Instructions for setting up SM300D2 sensor to work with ESPHome
    :image: sm300d2-full.jpg
    :keywords: sm300d2

The ``sm300d2`` sensor platform allows you to use the SM300D2 7-in-1 Air Quality Sensor with ESPHome.

.. figure:: images/sm300d2-full.jpg
    :align: center
    :width: 50.0%

    SM300D2 7-in-1 Air Quality Sensor.

.. figure:: images/sm300d2-ui.png
    :align: center
    :width: 50.0%


The SM300D2 sensor supports connections via UART or RS485. This platform only supports UART-connections.
Make sure you have a :ref:`UART bus <uart>` in your configuration with the ``rx_pin`` connected to the
TX pin of the sensor. The sensor does not support receiving data, so the ``tx_pin`` does not need to be
connected. The sensor expects the baud rate to be set at 9600.

.. code-block:: yaml

    # Example configuration entry
    uart:
      rx_pin: D0
      tx_pin: D1
      baud_rate: 9600

    sensor:
      - platform: sm300d2
        co2:
          name: "SM300D2 CO2 Value"
        formaldehyde:
          name: "SM300D2 Formaldehyde Value"
        tvoc:
          name: "SM300D2 TVOC Value"
        pm_2_5:
          name: "SM300D2 PM2.5 Value"
        pm_10_0:
          name: "SM300D2 PM10 Value"
        temperature:
          name: "SM300D2 Temperature Value"
        humidity:
          name: "SM300D2 Humidity Value"
        update_interval: 60s

Configuration variables:
------------------------


- **co2** (**Required**): The CO₂ data from the sensor in parts per million (ppm).

  - **name** (**Required**, string): The name of the CO₂ sensor.
  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
  - All other options from :ref:`Sensor <config-sensor>`.

- **formaldehyde** (**Required**): The formaldehyde data of the sensor in micrograms per cubic meter air (µg/m³).

  - **name** (**Required**, string): The name of the formaldehyde sensor.
  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
  - All other options from :ref:`Sensor <config-sensor>`.

- **tvoc** (**Required**): The total volatile organic compounds (TVOC) data of the sensor in micrograms per cubic meter air (µg/m³).

  - **name** (**Required**, string): The name of the TVOC sensor.
  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
  - All other options from :ref:`Sensor <config-sensor>`.

- **pm_2_5** (**Required**): The PM2.5 data of the sensor in micrograms per cubic meter air (µg/m³).

  - **name** (**Required**, string): The name of the PM2.5 sensor.
  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
  - All other options from :ref:`Sensor <config-sensor>`.

- **pm_10_0** (**Required**): The PM10 data of the sensor in micrograms per cubic meter air (µg/m³).

  - **name** (**Required**, string): The name of the PM10 sensor.
  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
  - All other options from :ref:`Sensor <config-sensor>`.

- **temperature** (**Required**): The temperature data of the sensor in degrees celsius (°C).

  - **name** (**Required**, string): The name of the temperature sensor.
  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
  - All other options from :ref:`Sensor <config-sensor>`.

- **humidity** (**Required**): The humidity data of the sensor in percent relative humidity (%).

  - **name** (**Required**, string): The name of the humidity sensor.
  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
  - All other options from :ref:`Sensor <config-sensor>`.

- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the
  sensor. Defaults to ``60s``.

- **uart_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the :ref:`UART Component <uart>` if you want
  to use multiple UART buses.

- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for actions.

.. figure:: images/sm300d2-pins.jpg
    :align: center
    :width: 80.0%

    Pins on the SM300D2. UART RX is not in use.

.. note::

    ``5V`` should be connected to power supply (supported voltage is 4.8 V to 5.2 V), ``GD`` to ``GND`` pin


See Also
--------

- :ref:`sensor-filters`
- :apiref:`sm300d2/sm300d2.h`
- :ghedit:`Edit`