Endstop Cover
=============

.. seo::
    :description: Instructions for setting up time-based covers in ESPHome.
    :image: TODO.png

The ``endstop`` cover platform allows you to create covers with position control that have
endstops at both ends of the cover to detect the fully-open and fully-closed states.
When any of these endstops are reached, the cover stops and sends out the corresponding state.

Additionally, open and close durations can be specified to allow ESPHome to approximate the
current position of the cover.

.. figure:: images/more-info-ui.png
    :align: center
    :width: 75.0%

.. code-block:: yaml

    # Example configuration entry
    cover:
      - platform: endstop
        name: "Endstop Cover"

        open_action:
          - switch.turn_on: open_cover_switch
        open_duration: 2.1min
        open_endstop: open_endstop_binary_sensor

        close_action:
          - switch.turn_on: close_cover_switch
        close_duration: 2min
        close_endstop: close_endstop_binary_sensor

        stop_action:
          - switch.turn_off: open_cover_switch
          - switch.turn_off: close_cover_switch


Configuration variables:
------------------------

- **name** (**Required**, string): The name of the cover.
- **open_action** (**Required**, :ref:`Action <config-action>`): The action that should
  be performed when the remote requests the cover to be opened.
- **open_duration** (**Required**, :ref:`config-time`): The amount of time it takes the cover
  to open up from the fully-closed state.
- **open_endstop** (**Required**, :ref:`config-id`): The ID of the
  :ref:`Binary Sensor <config-binary_sensor>` that turns on when the open position is reached.

- **close_action** (*Optional*, :ref:`Action <config-action>`): The action that should
  be performed when the remote requests the cover to be closed.
- **close_duration** (**Required**, :ref:`config-time`): The amount of time it takes the cover
  to close from the fully-open state.
- **close_endstop** (**Required**, :ref:`config-id`): The ID of the
  :ref:`Binary Sensor <config-binary_sensor>` that turns on when the closed position is reached.

- **stop_action** (**Required**, :ref:`Action <config-action>`): The action that should
  be performed when the remote requests the cover to be closed or an endstop is reached.
- **max_duration** (*Optional*, :ref:`config-time`): The maximum duration the cover should be opening
  or closing. Useful for protecting from dysfunctional endstops.
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
- All other options from :ref:`Cover <config-cover>`.

See Also
--------

- :doc:`index`
- :ref:`automation`
- :apiref:`endstop/endstop_cover.h`
- :ghedit:`Edit`