ESPHome 2023.10.0 - 18th October 2023 ===================================== .. seo:: :description: Changelog for ESPHome 2023.10.0. :image: /_static/changelog-2023.10.0.png :author: Jesse Hills :author_twitter: @jesserockz .. imgtable:: :columns: 3 MMC5983, components/sensor/mmc5983, mmc5983.jpg This release is quite small as myself (:ghuser:`jesserockz`) and :ghuser:`kbx81` have been focusing on ``voice_assistant`` updates and preparations for the Year of the Voice - Chapter 4. Check out the stream replay here: .. raw:: html XOR Condition ------------- A new ``xor`` condition has been added to the automation engine. This condition will only be true when a single condition in the list is true. Release 2023.10.1 - October 19 ------------------------------ - Fix voice_assistant without a speaker :esphomepr:`5558` by :ghuser:`jesserockz` - esp32_improv add timeout :esphomepr:`5556` by :ghuser:`jesserockz` - Create IPv4 sockets if ipv6 is not enabled :esphomepr:`5565` by :ghuser:`jesserockz` - Incorrect ESP32 Strapping PIN Defined :esphomepr:`5563` by :ghuser:`descipher` Release 2023.10.2 - October 24 ------------------------------ - Fix XOR condition :esphomepr:`5567` by :ghuser:`jesserockz` - Improv Serial support via USB CDC and JTAG :esphomepr:`5559` by :ghuser:`kbx81` - Publish the `pulse_meter` total when setting the total :esphomepr:`5475` by :ghuser:`TrentHouliston` - Remove explicit cast for IPAddress :esphomepr:`5574` by :ghuser:`HeMan` - Set addr type when copy from ip4_addr_t :esphomepr:`5583` by :ghuser:`HeMan` - fix canbus send config :esphomepr:`5585` by :ghuser:`ssieb` - Allow set climate preset to NONE :esphomepr:`5588` by :ghuser:`dentra` Release 2023.10.3 - October 24 ------------------------------ - Set IP address `type` only when IPv4 and IPv6 are both enabled :esphomepr:`5595` by :ghuser:`kbx81` Breaking changes ---------------- The SHT3x had a ``heater_enabled`` config option added in the 2023.9.0 release with a default value of ``true``. This has been flipped this release to be ``false`` as it started causing issues with various sensors. The SPS30 number concentration sensors had their units fixed to be ``#/cm³`` instead of ``#/m³``. Full list of changes -------------------- New Components ^^^^^^^^^^^^^^ - Implement sensor component for MMC5983 :esphomepr:`5361` by :ghuser:`agoode` (new-integration) Breaking Changes ^^^^^^^^^^^^^^^^ - Do not enable SHT3x heater by default. Fixes #4886. :esphomepr:`5445` by :ghuser:`jkl1337` (breaking-change) - Fix units for SPS30 number concentration sensors :esphomepr:`5452` by :ghuser:`kahrendt` (breaking-change) Beta Changes ^^^^^^^^^^^^ - Update htu21d.cpp, fix publishing of heater level :esphomepr:`5520` by :ghuser:`Nippey` - BD5758D - Add delays and ACKs :esphomepr:`5524` by :ghuser:`Cossid` - Update Improv BLE component :esphomepr:`5518` by :ghuser:`jesserockz` - SM10BIT_BASE - Add delays and ACKs, clear all channels before sleeping. :esphomepr:`5526` by :ghuser:`Cossid` - BP1658CJ - Clear all channels before sleeping. :esphomepr:`5525` by :ghuser:`Cossid` - Prometheus fix for esp-idf and fix newlines :esphomepr:`5536` by :ghuser:`jesserockz` - Make IPAddress's operator!= compare values, not memory addresses. :esphomepr:`5537` by :ghuser:`raineth` - Add change i2c address and allow multi conf for TB6612FNG :esphomepr:`5492` by :ghuser:`max246` - Add stream start and end events :esphomepr:`5545` by :ghuser:`jesserockz` - Fix esp32_improv authorizer with no binary sensors in config :esphomepr:`5546` by :ghuser:`jesserockz` - More voice assistant fixes :esphomepr:`5547` by :ghuser:`jesserockz` - Fix default libretiny manufacturer reported to HA :esphomepr:`5549` by :ghuser:`jesserockz` - SML: fix incomplete sign extension for abbreviated transmissions :esphomepr:`5544` by :ghuser:`fblaese` - esp32_improv advertise capabilities and state in ble service data :esphomepr:`5553` by :ghuser:`jesserockz` Notable Changes ^^^^^^^^^^^^^^^ - Add xor automation condition :esphomepr:`5453` by :ghuser:`kahrendt` (notable-change) All changes ^^^^^^^^^^^ - SX1509 component :esphomepr:`5385` by :ghuser:`vr6racer` - Ci find YAML tests dynamically :esphomepr:`5399` by :ghuser:`Fabian-Schmidt` - Make ESPHome data dir configurable :esphomepr:`5417` by :ghuser:`werdnum` - Bump actions/checkout from 4.0.0 to 4.1.0 :esphomepr:`5420` by :ghuser:`dependabot[bot]` - Fix typo in documentation :esphomepr:`5425` by :ghuser:`kapily` - Bump pylint from 2.17.5 to 2.17.6 :esphomepr:`5429` by :ghuser:`dependabot[bot]` - Refactor ip address representation :esphomepr:`5252` by :ghuser:`HeMan` - Fix .esphome path when not using envvar :esphomepr:`5440` by :ghuser:`jesserockz` - [BP1658CJ] Missing clock line delays and ack bit :esphomepr:`5448` by :ghuser:`leoshusar` - [ssd1351] fix: wait for the component to be at least in setup phase b… :esphomepr:`5454` by :ghuser:`xdecock` - Do not enable SHT3x heater by default. Fixes #4886. :esphomepr:`5445` by :ghuser:`jkl1337` (breaking-change) - Add testcases for multiple SPI buses on ESP32 Arduino :esphomepr:`5457` by :ghuser:`angelnu` - Feat/component poller suspend :esphomepr:`5423` by :ghuser:`xdecock` - Bump actions/setup-python from 4.7.0 to 4.7.1 :esphomepr:`5467` by :ghuser:`dependabot[bot]` - Add xor automation condition :esphomepr:`5453` by :ghuser:`kahrendt` (notable-change) - Fix units for SPS30 number concentration sensors :esphomepr:`5452` by :ghuser:`kahrendt` (breaking-change) - ST7789v - Allow predefined backlight pin to be disabled. :esphomepr:`5476` by :ghuser:`clydebarrow` - MAX7219 - Update intensity :esphomepr:`5477` by :ghuser:`clydebarrow` - St7789v and SPI data rate :esphomepr:`5472` by :ghuser:`clydebarrow` - Move CONF_IRQ_PIN into const.py :esphomepr:`5488` by :ghuser:`kbx81` - Initial ESP32-H2 Support :esphomepr:`5498` by :ghuser:`vidplace7` - Increased debug message precision :esphomepr:`5496` by :ghuser:`lukeansell` - Support for Haier IR protocol added :esphomepr:`5403` by :ghuser:`paveldn` - add USE_SPI define :esphomepr:`5500` by :ghuser:`angelnu` - Implement sensor component for MMC5983 :esphomepr:`5361` by :ghuser:`agoode` (new-integration) - Bump docker dependencies :esphomepr:`5501` by :ghuser:`jesserockz` - Move to Pillow 10.x :esphomepr:`5489` by :ghuser:`hostcc` - [Sprinkler] Initialize timers early to avoid crash :esphomepr:`5499` by :ghuser:`hostcc` - Deep sleep is only available on esp32 and esp8266 :esphomepr:`5507` by :ghuser:`jesserockz` - Use platform consts :esphomepr:`5508` by :ghuser:`jesserockz` - Fixed precision for Nextion sensor with float values :esphomepr:`5497` by :ghuser:`olegtarasov` - Remote wake word support for voice assistant :esphomepr:`5229` by :ghuser:`jesserockz` - Don't allow entity category "CONFIG" for sensors :esphomepr:`5505` by :ghuser:`edenhaus` - Prepare protobuf for ESP-IDF >= 5 :esphomepr:`5510` by :ghuser:`HeMan` - fix build lang schema for spi and i2c :esphomepr:`5509` by :ghuser:`glmnet` - Added Nextion display error handling during setup :esphomepr:`5493` by :ghuser:`olegtarasov` - Fix e131 and voice_assistant sockets :esphomepr:`5502` by :ghuser:`justdaniel-gh` - Allow manual set "Invert_display" :esphomepr:`5494` by :ghuser:`nielsnl68` - As3935 calibration :esphomepr:`5366` by :ghuser:`mveinot` - Small fixes for voice assistant :esphomepr:`5513` by :ghuser:`synesthesiam` - Add detail param to allow listing of select options in WebServer REST API :esphomepr:`5503` by :ghuser:`DanielBaulig` - Bump curl to 7.74.0-1.3+deb11u10 :esphomepr:`5517` by :ghuser:`jesserockz` - Update htu21d.cpp, fix publishing of heater level :esphomepr:`5520` by :ghuser:`Nippey` - BD5758D - Add delays and ACKs :esphomepr:`5524` by :ghuser:`Cossid` - Update Improv BLE component :esphomepr:`5518` by :ghuser:`jesserockz` - SM10BIT_BASE - Add delays and ACKs, clear all channels before sleeping. :esphomepr:`5526` by :ghuser:`Cossid` - BP1658CJ - Clear all channels before sleeping. :esphomepr:`5525` by :ghuser:`Cossid` - Prometheus fix for esp-idf and fix newlines :esphomepr:`5536` by :ghuser:`jesserockz` - Make IPAddress's operator!= compare values, not memory addresses. :esphomepr:`5537` by :ghuser:`raineth` - Add change i2c address and allow multi conf for TB6612FNG :esphomepr:`5492` by :ghuser:`max246` - Add stream start and end events :esphomepr:`5545` by :ghuser:`jesserockz` - Fix esp32_improv authorizer with no binary sensors in config :esphomepr:`5546` by :ghuser:`jesserockz` - More voice assistant fixes :esphomepr:`5547` by :ghuser:`jesserockz` - Fix default libretiny manufacturer reported to HA :esphomepr:`5549` by :ghuser:`jesserockz` - SML: fix incomplete sign extension for abbreviated transmissions :esphomepr:`5544` by :ghuser:`fblaese` - esp32_improv advertise capabilities and state in ble service data :esphomepr:`5553` by :ghuser:`jesserockz` Past Changelogs --------------- - :doc:`2023.9.0` - :doc:`2023.8.0` - :doc:`2023.7.0` - :doc:`2023.6.0` - :doc:`2023.5.0` - :doc:`2023.4.0` - :doc:`2023.3.0` - :doc:`2023.2.0` - :doc:`2022.12.0` - :doc:`2022.11.0` - :doc:`2022.10.0` - :doc:`2022.9.0` - :doc:`2022.8.0` - :doc:`2022.6.0` - :doc:`2022.5.0` - :doc:`2022.4.0` - :doc:`2022.3.0` - :doc:`2022.2.0` - :doc:`2022.1.0` - :doc:`2021.12.0` - :doc:`2021.11.0` - :doc:`2021.10.0` - :doc:`2021.9.0` - :doc:`2021.8.0` - :doc:`v1.20.0` - :doc:`v1.19.0` - :doc:`v1.18.0` - :doc:`v1.17.0` - :doc:`v1.16.0` - :doc:`v1.15.0` - :doc:`v1.14.0` - :doc:`v1.13.0` - :doc:`v1.12.0` - :doc:`v1.11.0` - :doc:`v1.10.0` - :doc:`v1.9.0` - :doc:`v1.8.0` - :doc:`v1.7.0`