SHT3X-D Temperature+Humidity Sensor =================================== .. seo:: :description: Instructions for setting up SHT31-D temperature and humidity sensors :image: sht3xd.jpg The ``sht3xd`` sensor platform Temperature+Humidity sensor allows you to use your Sensirion SHT31-D (`datasheet `__, `Adafruit`_ ) sensors with ESPHome. The :ref:`I²C Bus ` is required to be set up in your configuration for this sensor to work. .. _Adafruit: https://www.adafruit.com/product/2857 .. figure:: images/temperature-humidity.png :align: center :width: 80.0% .. code-block:: yaml # Example configuration entry sensor: - platform: sht3xd temperature: name: "Living Room Temperature" humidity: name: "Living Room Humidity" address: 0x44 update_interval: 60s Configuration variables: ------------------------ - **temperature** (**Required**): The information for the temperature sensor. - **name** (**Required**, string): The name for the temperature sensor. - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas. - All other options from :ref:`Sensor `. - **humidity** (**Required**): The information for the humidity sensor. - **name** (**Required**, string): The name for the humidity sensor. - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas. - All other options from :ref:`Sensor `. - **address** (*Optional*, int): Manually specify the I²C address of the sensor. Defaults to ``0x44``. - **update_interval** (*Optional*, :ref:`config-time`): The interval to check the sensor. Defaults to ``60s``. See Also -------- - :ref:`sensor-filters` - :doc:`dht` - :doc:`dht12` - :doc:`hdc1080` - :doc:`htu21d` - :apiref:`sht3xd/sht3xd.h` - :ghedit:`Edit`