LightWaveRF =========== .. seo:: :description: LightWaveRF Switch Lights :image: brightness-medium.svg The ``LightWaveRF`` light platform creates a module to dump and send commands to light switches .. figure:: images/lightwaverf.jpg :align: center :width: 40.0% LightwaveRF switches are very common in UK automation. They allow control of lights, sockets, relays and more via RF remote or via a hub. Using an inexpensive RF transmitter and receiver you can control your devices via ESPHome. .. code-block:: yaml # Example configuration entry # Specify the two pins to connect the receiver and transmitter lightwaverf: read_pin: GPIOXX write_pin: GPIOXX Note: To gather the RAW codes from the remote, setup the ``read_pin`` and observe in the logs the printing of the codes. Configuration variables: ------------------------ - **read_pin** (**Required**, :ref:`Pin Schema `): The pin that the receiver is connected to - **write_pin** (**Required**, :ref:`Pin Schema `): the pin that the transmitter is connected to .. lightwaverf.send_raw: ``lightwaverf.send_raw`` Action -------------------------------- Send the raw data that has been captured via the dump system .. code-block:: yaml on_...: then: - lightwaverf.send_raw: code: [0x04, 0x00, 0x00, 0x00, 0x0f, 0x03, 0x0d, 0x09, 0x08, 0x08] name: "Sofa" repeat: 1 Configuration variables: ------------------------ - **name** (*Optional*, string): The name to give for the action - **code** (**Required**, list hex): The raw dump in an array of hex - **repeat** (*Optional*, int): The number of times the message will be repeated - **inverted** (*Optional*, boolean): Send the signal inverted Compatible Hardware ------------------- The RF transmitters/receivers listed below have been confirmed to work with the current code base. If you discover others that work, please let us know! Compatible transmitter: - MX-FS-03V Compatible receiver: - RXB6 See Also -------- - :doc:`/components/light/index` - :ghedit:`Edit`