MCP9808 Temperature Sensor ========================== .. seo:: :description: Instructions for setting up MCP9808 temperature sensor. :image: mcp9808.jpg :keywords: MCP9808 The MCP9808 Temperature sensor allows you to use your MCP9808 (`datasheet `__, `Adafruit `__) sensors with ESPHome. The :ref:`I²C Bus ` is required to be set up in your configuration for this sensor to work. .. figure:: images/mcp9808-full.jpg :align: center :target: `Adafruit`_ :width: 50.0% MCP9808 Temperature Sensor. Image by `Adafruit`_. .. _Adafruit: https://www.adafruit.com/product/1782 .. code-block:: yaml # Example configuration entry sensor: - platform: mcp9808 name: "Living Room Temperature" update_interval: 60s Configuration variables: ------------------------ - **temperature** (**Required**): The information for the temperature sensor. - **name** (**Required**, string): The name for the temperature sensor. - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas. - All other options from :ref:`Sensor `. - **address** (*Optional*, int): Manually specify the I²C address of the sensor. Defaults to ``0x18``. - **update_interval** (*Optional*, :ref:`config-time`): The interval to check the sensor. Defaults to ``60s``. See Also -------- - :ref:`sensor-filters` - :doc:`dht` - :doc:`dht12` - :doc:`htu21d` - :doc:`sht3xd` - :doc:`hdc1080` - :apiref:`mcp9808/mcp9808.h` - `MCP9808 Library `__ by `AdaFruit `__ - :ghedit:`Edit`