75 lines
2.4 KiB
ReStructuredText
75 lines
2.4 KiB
ReStructuredText
Tuya Fan
|
|
========
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up a Tuya ceiling fan switch.
|
|
:image: fan.svg
|
|
|
|
The ``tuya`` fan platform creates a variable speed fan from a
|
|
tuya component.
|
|
|
|
.. figure:: images/tuyafan.jpg
|
|
:align: center
|
|
:width: 40%
|
|
|
|
A Tuya based fan controller wall plate.
|
|
|
|
The Tuya fan requires a :doc:`/components/tuya` to be configured.
|
|
|
|
Here is an example output for a Tuya fan controller:
|
|
|
|
.. code-block:: text
|
|
|
|
[12:39:45][C][tuya:023]: Tuya:
|
|
[12:39:45][C][tuya:032]: Datapoint 1: switch (value: ON)
|
|
[12:39:45][C][tuya:036]: Datapoint 3: enum (value: 1)
|
|
[12:39:45][C][tuya:036]: Datapoint 6: enum (value: 0)
|
|
[12:39:45][C][tuya:034]: Datapoint 7: int value (value: 0)
|
|
[12:39:45][C][tuya:032]: Datapoint 9: switch (value: OFF)
|
|
[12:39:45][C][tuya:046]: Product: '{"p":"hqq73kftvzh8c92u","v":"1.0.0","m":0}'
|
|
|
|
On this controller, the data points are:
|
|
|
|
- 1 represents the fan on/off state.
|
|
- 3 represents the speed setting.
|
|
- 9 represents the additional light switch. (use the :doc:`/components/light/tuya` component to control this)
|
|
- 6 & 7 are unknown and don't seem to affect the state.
|
|
|
|
Based on this, you can create the fan as follows:
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Create a fan
|
|
fan:
|
|
- platform: "tuya"
|
|
name: "MyFan"
|
|
switch_datapoint: 1
|
|
speed_datapoint: 3
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
|
|
- **name** (**Required**, string): The name of the fan.
|
|
- **speed_datapoint** (**Required**, int): The datapoint id number of the fan speed.
|
|
- **switch_datapoint** (**Required**, int): The datapoint id number of the fan switch.
|
|
- **oscillation_datapoint** (*Optional*, int): The datapoint id number of the oscillation
|
|
switch. Probably not supported on any Tuya controllers currently, but it's there if need be.
|
|
- **direction_datapoint** (*Optional*, int): The datapoint id number of the direction
|
|
switch. Supported by some ceiling fans.
|
|
- **speed_count** (*Optional*, int): Set the number of supported discrete speed levels. Defaults to ``3``.
|
|
- All other options from :ref:`Fan <config-fan>`.
|
|
|
|
.. note::
|
|
|
|
The MCU on the Tuya dimmer handles the LEDs and they dont seem to be controllable
|
|
over the serial bus.
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`/components/tuya`
|
|
- :doc:`/components/fan/index`
|
|
- :apiref:`tuya/fan/tuya_fan.h`
|
|
- :ghedit:`Edit`
|