esphome-docs/components/sensor/dps310.rst

62 lines
1.9 KiB
ReStructuredText

DPS310 Atmospheric Pressure Sensor
==================================
.. seo::
:description: Instructions for setting up DPS310 atmospheric pressure sensors
:image: dps310.jpg
:keywords: DPS310
The ``dps310`` sensor platform allows you to use both the temperature and pressure sensors on
your DPS310 atmospheric pressure sensor (`Adafruit <https://www.adafruit.com/product/4494>`__)
with ESPHome. The :ref:`I²C <i2c>` component is required to be set up in your configuration.
.. figure:: images/dps310-full.jpg
:align: center
:width: 50.0%
DPS310 Atmospheric Pressure Sensor board from `Adafruit <https://www.adafruit.com/product/4494>`__
.. code-block:: yaml
# Example configuration entry
sensor:
- platform: dps310
temperature:
name: "Outside Temperature"
pressure:
name: "Outside Pressure"
address: 0x77
update_interval: 60s
Configuration variables:
------------------------
- **pressure** (**Required**): The information for the pressure sensor.
- **name** (**Required**, string): The name for the pressure sensor.
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
- All other options from :ref:`Sensor <config-sensor>`.
- **temperature** (**Required**): The information for the temperature.
sensor
- **name** (**Required**, string): The name for the temperature
sensor.
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
- All other options from :ref:`Sensor <config-sensor>`.
- **address** (*Optional*, int): Manually specify the I²C address of
the sensor. Defaults to ``0x77``.
- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the
sensor. Defaults to ``60s``.
See Also
--------
- :ref:`sensor-filters`
- :doc:`bmp280`
- :doc:`bme680`
- :doc:`bmp085`
- :apiref:`dps310/dps310.h`
- :ghedit:`Edit`