59 lines
1.8 KiB
ReStructuredText
59 lines
1.8 KiB
ReStructuredText
INA260 DC Current and Power sensor
|
|
==================================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up INA260 DC current and power sensors
|
|
:image: ina260.jpg
|
|
:keywords: ina260
|
|
|
|
The ``ina260`` sensor platform allows you to use your INA260 DC Current and Power Sensor
|
|
(`datasheet <https://www.ti.com/lit/ds/symlink/ina260.pdf>`__,
|
|
`Adafruit`_) sensors with ESPHome. The :ref:`I²C Bus <i2c>` is
|
|
required to be set up in your configuration for this sensor to work.
|
|
|
|
|
|
.. figure:: images/ina260-full.png
|
|
:align: center
|
|
:width: 65.0%
|
|
|
|
INA260 DC Current and Power Sensor.
|
|
|
|
.. _Adafruit: https://www.adafruit.com/product/4226
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
sensor:
|
|
- platform: ina260
|
|
address: 0x40
|
|
current:
|
|
name: "INA260 Current"
|
|
power:
|
|
name: "INA260 Power"
|
|
bus_voltage:
|
|
name: "INA260 Bus Voltage"
|
|
update_interval: 60s
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **address** (*Optional*, int): Manually specify the I²C address of the sensor. Defaults to ``0x40``.
|
|
- **current** (*Optional*): Use the current value of the sensor in amperes. All options from
|
|
:ref:`Sensor <config-sensor>`.
|
|
- **power** (*Optional*): Use the power value of the sensor in watts. All options from
|
|
:ref:`Sensor <config-sensor>`.
|
|
- **bus_voltage** (*Optional*): Use the bus voltage (voltage of the high side contact) value of the sensor in V. All options from :ref:`Sensor <config-sensor>`.
|
|
- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the sensor. Defaults to ``60s``.
|
|
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :ref:`sensor-filters`
|
|
- :doc:`ina219`
|
|
- :doc:`ina226`
|
|
- :doc:`ina3221`
|
|
- :apiref:`ina260/ina260.h`
|
|
- `INA260 Arduino Library <https://github.com/adafruit/Adafruit_INA260>`__
|
|
- :ghedit:`Edit`
|