mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-12-26 17:27:47 +01:00
44 lines
1.7 KiB
ReStructuredText
44 lines
1.7 KiB
ReStructuredText
MPU6050 Accelerometer/Gyroscope Component
|
|
=========================================
|
|
|
|
The MPU6050 allows you to use your MPU6050 i2c-enabled accelerometers/gyroscopes with
|
|
esphomelib (`datasheet <https://www.invensense.com/wp-content/uploads/2015/02/MPU-6000-Datasheet1.pdf>`__,
|
|
`Sparkfun <https://www.sparkfun.com/products/11028>`__). It requires i2c to be setup to work.
|
|
|
|
This component only supports reading in the measurements directly from the registers of the chip
|
|
at the moment. If you do need some more complicated signal processing and/or configuration options,
|
|
I would recommend copying the code over and creating your own custom component, as supporting every
|
|
single possible configuration is not esphomelib's ultimate goal with a chip that supports such a
|
|
variety of options.
|
|
|
|
Example Usage
|
|
-------------
|
|
|
|
.. code-block:: cpp
|
|
|
|
// inside setup()
|
|
App.init_i2c(SDA_PIN, SCL_PIN); // change these values for your pins.
|
|
// create sensors
|
|
auto *mpu6050 = App.make_mpu6050_sensor();
|
|
App.register_sensor(mpu6050->make_accel_x_sensor("MPU6050 Accel X"));
|
|
App.register_sensor(mpu6050->make_accel_y_sensor("MPU6050 Accel Y"));
|
|
App.register_sensor(mpu6050->make_accel_z_sensor("MPU6050 Accel Z"));
|
|
App.register_sensor(mpu6050->make_gyro_x_sensor("MPU6050 Gyro X"));
|
|
App.register_sensor(mpu6050->make_gyro_y_sensor("MPU6050 Gyro Y"));
|
|
App.register_sensor(mpu6050->make_gyro_z_sensor("MPU6050 Gyro Z"));
|
|
App.register_sensor(mpu6050->make_temperature_sensor("MPU6050 Temperature"));
|
|
|
|
.. cpp:namespace:: nullptr
|
|
|
|
See :cpp:func:`Application::make_mpu6050_sensor`.
|
|
|
|
API Reference
|
|
-------------
|
|
|
|
.. cpp:namespace:: nullptr
|
|
|
|
.. doxygenclass:: sensor::MPU6050Component
|
|
:members:
|
|
:protected-members:
|
|
:undoc-members:
|