mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-12-28 17:48:35 +01:00
138 lines
6.2 KiB
ReStructuredText
138 lines
6.2 KiB
ReStructuredText
IR Remote Climate
|
|
=================
|
|
|
|
.. seo::
|
|
:description: Controls a variety of compatible Climate via IR
|
|
:image: air-conditioner-ir.png
|
|
|
|
The climate component allows you to control a variety of compatible AC units by sending IR signals
|
|
as your remote unit would do.
|
|
|
|
.. figure:: images/climate-ui.png
|
|
:align: center
|
|
:width: 60.0%
|
|
|
|
There is a growing list of compatible units. If your unit is not listed below you can fill a feature
|
|
request so it will be added (see FAQ).
|
|
|
|
+------------------------+---------------------+----------------------+------------------------------------+
|
|
| Name | Platform name | Supports receiver | |
|
|
| | | | |
|
|
+========================+=====================+======================+====================================+
|
|
| Coolix | ``coolix`` | yes | |
|
|
+------------------------+---------------------+----------------------+------------------------------------+
|
|
| Daikin | ``daikin`` | yes | |
|
|
+------------------------+---------------------+----------------------+------------------------------------+
|
|
| Fujitsu General | ``fujitsu_general`` | | |
|
|
+------------------------+---------------------+----------------------+------------------------------------+
|
|
| Mitsubishi | ``mitsubishi`` | | |
|
|
+------------------------+---------------------+----------------------+------------------------------------+
|
|
| TCL112, Fuego | ``tcl112`` | yes | |
|
|
+------------------------+---------------------+----------------------+------------------------------------+
|
|
| Toshiba | ``toshiba`` | yes | |
|
|
+------------------------+---------------------+----------------------+------------------------------------+
|
|
| Yashima | ``yashima`` | | |
|
|
+------------------------+---------------------+----------------------+------------------------------------+
|
|
| Whirlpool | ``whirlpool`` | yes | :ref:`more info<model_whirlpool>` |
|
|
+------------------------+---------------------+----------------------+------------------------------------+
|
|
| LG | ``climate_ir_lg`` | yes | |
|
|
+------------------------+---------------------+----------------------+------------------------------------+
|
|
|
|
This component requires that you have setup a :doc:`/components/remote_transmitter`.
|
|
|
|
Due to the unidirectional nature of IR remote controllers, this component cannot determine the
|
|
actual state of the device, and will assume the state of the device is the latest state requested.
|
|
|
|
However, when receiver is supported, you can optionally add a :doc:`/components/remote_receiver`
|
|
component so the climate state will be tracked when it is operated with the original remote
|
|
controller unit.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
remote_transmitter:
|
|
pin: GPIO32
|
|
carrier_duty_percent: 50%
|
|
|
|
climate:
|
|
- platform: coolix # adjust to match your AC unit!
|
|
name: "Living Room AC"
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **name** (**Required**, string): The name for the climate device.
|
|
- **sensor** (*Optional*, :ref:`config-id`): The sensor that is used to measure the ambient
|
|
temperature. This is only for reporting the current temperature in the frontend.
|
|
- **supports_cool** (*Optional*, boolean): Enables setting cooling mode for this climate device. Defaults to ``True``.
|
|
- **supports_heat** (*Optional*, boolean): Enables setting heating mode for this climate device. Defaults to ``True``.
|
|
- **receiver_id** (*Optional*, :ref:`config-id`): The id of the remote_receiver if this platform supports
|
|
receiver. see: :ref:`ir-receiver_id`.
|
|
- All other options from :ref:`Climate <config-climate>`.
|
|
|
|
Advanced options:
|
|
|
|
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
|
|
- **transmitter_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the remote transmitter.
|
|
|
|
.. _ir-receiver_id:
|
|
|
|
Using a Receiver
|
|
----------------
|
|
|
|
.. note::
|
|
|
|
This is only supported with select climate devices, see "Supports receiver" in the table at the top of the page.
|
|
|
|
Optionally, some platforms can listen to data the climate device sends over infrared to update their state (
|
|
for example what mode the device is in). By setting up a :doc:`remote_receiver </components/remote_receiver>`
|
|
and passing its ID to the climate platform you can enable this mode.
|
|
|
|
When using a receiver it is recommended to put the IR receiver as close as possible to the equipment's
|
|
IR receiver.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
remote_receiver:
|
|
id: rcvr
|
|
pin:
|
|
number: GPIO14
|
|
inverted: True
|
|
mode: INPUT_PULLUP
|
|
# high 55% tolerance is recommended for some remote control units
|
|
tolerance: 55%
|
|
|
|
climate:
|
|
- platform: coolix
|
|
name: "Living Room AC"
|
|
receiver_id: rcvr
|
|
|
|
.. _model_whirlpool:
|
|
|
|
Whirlpool
|
|
---------
|
|
|
|
Additional configuration is available for this model
|
|
|
|
- **model** (*Optional*, string): There are two valid models
|
|
|
|
* ``MODEL_DG11J1_3A``: Temperature range is from 18 to 32 (default)
|
|
* ``MODEL_DG11J1_91``: Temperature range is from 16 to 30
|
|
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`/components/climate/index`
|
|
- :doc:`/components/remote_transmitter`
|
|
- :apiref:`coolix.h <coolix/coolix.h>`,
|
|
:apiref:`daikin.h <daikin/daikin.h>`
|
|
:apiref:`fujitsu_general.h <fujitsu_general/fujitsu_general.h>`,
|
|
:apiref:`mitsubishi.h <mitsubishi/mitsubishi.h>`,
|
|
:apiref:`tcl112.h <tcl112/tcl112.h>`,
|
|
:apiref:`yashima.h <yashima/yashima.h>`
|
|
:apiref:`whirlpool.h <whirlpool/whirlpool.h>`
|
|
:apiref:`climate_ir_lg.h <climate_ir_lg/climate_ir_lg.h>`
|
|
- :ghedit:`Edit`
|